Casio Exilim Ex Z50 Users Guide

							USING A MEMORY CARD
151
To copy a specific file from a memory
card to built-in memory
1.Perform steps 1 through 3 of the procedure
under “To copy all the files in built-in memory
to a memory card”.
2.Use [] and [] to select “Card  Built-in”,
and then press [SET].
3.Use [
] and [] to select the file you want to
copy.
4.Use [] and [] to select “Copy”, and then
press [SET].
•This starts the copy operation and displays the
message “Busy.... Please wait...”.
•The file reappears on the monitor screen after the
copy operation is complete.
•Repeat steps 3 through 4 to copy other images, if
you want.
5.Press [MENU] to exit the copy operation.
 NOTE 
•Files are copied to the folder in built-in memory
whose name has the largest number.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
152
PRINTING IMAGES
A digital camera provides you with a variety of different
ways to print the images it records. The three main printing
methods are described below. Use the method that best
suits your needs.

 Professional Print Service
The camera’s DPOF feature lets you specify which images
you want to print and how many copies of each you want.
For more information, see “DPOF” (page 153).
 NOTE 
•Certain print service providers may not support
DPOF or may support different printing protocols. In
this case, use the protocol supported by your print
service to specify the images you want to have
printed.

Printing Directly on a Printer Equipped with
a Card Slot, or a Printer that Supports USB
DIRECT-PRINT or PictBridge
After using the camera’s DPOF feature to specify the
images you want to print and how many copies of each
should be printed, you can plug the memory card into a
printer equipped with a card slot, or connect the camera to
a PictBridge or USB DIRECT-PRINT printer for printing.
For more information, see “DPOF” (page 153) and “Using
PictBridge or USB DIRECT-PRINT” (page 156).
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
153

 Printing with a Computer
Windows Users
The camera comes bundled with Photo Loader and
Photohands applications (page 184), which can be installed
on a Windows computer for image transfer, management,
and printing. For more information, see “Viewing Images on
a Computer” (page 160) and “Installing the Software from
the CD-ROM” (page 183).
Macintosh Users
The camera comes bundled with Photo Loader for the
Macintosh, which can be installed for image transfer and
management, but not for printing. Use commercially
available software for printing with a Macintosh.  For more
information, see “Viewing Images on a Computer” (page
160) and “Installing the Software from the CD-ROM” (page
183).DPOF
The letters “DPOF” stand for “Digital Print
Order Format”, which is a format for
recording on a memory card or other medium
which digital camera images should be
printed and how many copies of the image
should be printed. Then you can print on a
DPOF-compatible printer or at a professional
print service in accordance with the file name
and number of copies settings recorded on
the card.
With this camera, you can select images by viewing them
on the monitor screen without needing to remember file
names, their locations in memory, etc.

 DPOF Settings
File Name,
number of copies,
date
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
154
To configure print settings for a single
image
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab,
select “DPOF”, and
then press [].
3.Use [] and [] to select “Select images”,
and then press [].
4.Use [
] and [] to
display the image you
want.
5.Use [] and [] to specify the number of
copies.
•You can specify up to 99 for the number of copies.
Specify 00 if you do not want to have the image
printed.
6.To turn on date stamping for the prints, press
[DISP] so 12121 is displayed.
•12121 indicates that date stamping is turned on.
•To turn off date stamping for the prints, press [DISP]
so 
12121 is not displayed.
•Repeat steps 4 through 6 if you want to configure
other images for printing.
7.After all the settings are the way you want,
press [SET] to apply them.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
155
To configure print settings for all images
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “DPOF”, and
then press [].
3.Use [] and [] to select “All images”, and
then press [].
4.Use [] and [] to
specify the number of
copies.
•You can specify up to 99
for the number of copies.
Specify 00 if you do not
want to have the image
printed.
5.To turn on date stamping for the prints, press
[DISP] so 12121 is displayed.
•12121 indicates that date stamping is turned on.
•To turn off date stamping for the prints, press [DISP]
so 
12121 is not displayed.
6.After all the settings are the way you want,
press [SET] to apply them.
 IMPORTANT! 
•If you take a memory card to a professional print
service, be sure to tell them that it includes DPOF
settings for the images to be printed and the number
of copies. If you don’t, they may print all images on
the card, including the ones you do not want printed.
•Note that some professional print services do not
support DPOF printing. Check with your service
before ordering prints.
•Some printers may have settings that disable date
stamp and/or DPOF printing. See the user
documentation that comes with your printer for
details about how to enable these features.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
156
1.Press [MENU].
2.Select the “Set Up” tab, select “USB”, and
then press [].
3.Use [] and [] to select the setting you
want, and then press [SET].
Using PictBridge or USB DIRECT-PRINT
You can connect the camera
directly to a printer that supports
PictBridge or USB DIRECT-PRINT,
and perform image selection and
printing using the camera monitor
screen and controls. DPOF support
(page 153) also lets you specify
which images you want to print and
how many copies of each should be
printed.
•PictBridge is a standard
established by the Camera and
Imaging Products Association
(CIPA).
•USB DIRECT-PRINT is a
standard proposed by Seiko
Epson Corporation.
Select this setting:
Mass Storage (USBDIRECT-PRINT)
PTP (PictBridge) When connecting to this type of
device:
Computer or USB DIRECT-
PRINT-compatible printer
PictBridge-compatible printer
•Mass Storage (USB DIRECT-PRINT) causes the
camera to see the computer as an external storage
device. Use this setting for normal transfer of images
from the camera to a computer (using the bundled
Photo Loader application).
•PTP (PictBridge) simplifies the transfer of image data
to the connected device.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
157
4.Use the USB cable that comes with the
camera to connect the USB cradle to a printer.
•Also, connect the AC adaptor to the USB cradle and
plug the AC adaptor into an electrical outlet.
•If you are using battery power without the AC
adaptor, make sure that the battery is fully charged.
5.Set the camera on the USB cradle.
6.Turn on the printer.
7.Load paper for printing the images into the
printer.
USB
8.Press the USB
cradle’s [USB] button.
•This displays the print
menu on the camera’s
monitor screen.
9.Use [] and [] to select “Paper Size”, and
then press [].
10.Use [] and [] to select the paper size you
want to use for printing, and then press [SET].
•The following are the print sizes that are available.
3.5˝ ×
 5˝
5˝ ×
 7˝
4˝ ×
 6˝
A4
8.5˝ ×
 11˝
By Printer
•Selecting “By Printer” prints using the paper size
selected on the printer.
•Available paper size settings depend on the
connected printer. For full details, see the
instructions that come with your printer.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
158
11.Use [] and [] to
specify the print option
you want.
•To print a single image:
Select “1 Image” and then
press [SET]. Next, use
[
] and [] to select the
image you want to print.
•To print all images: Select “DPOF”, and then press
[SET].
•You can toggle date stamping of the image on and
off by pressing [DISP]. The 
12121 icon indicates that
date stamping is turned on.
12.On the camera’s monitor screen, use [] and
[] to select “Print”, and then press [SET].
•This starts printing and displays the message
“Busy.... Please wait...” on the monitor screen. The
message will disappear after a short while, even
though printing is still being performed. Pressing any
of the camera’s buttons while printing is in progress
will cause the message to reappear.
•The print menu will appear when printing is
complete.
•If you selected “1 Image” in step 11, you can select
another image for printing and then repeat this step
to print.
13.After you are finished printing, press the USB
cradle’s [USB] button, and then turn off the
camera.

 Printing Precautions
•See the documentation that comes with your printer for
information about print quality and paper settings.
•Contact your printer manufacturer for information about
models that support PictBridge and USB DIRECT-PRINT,
upgrades, etc.
•Never disconnect the USB cable, or perform any camera
or USB cradle operation while printing is in progress.
Doing so causes a printer error.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
159
PRINT Image Matching III
Images include PRINT Image MatchingIII data (mode setting and other camera
setup information). A printer that
supports PRINT Image Matching 
IIIreads this data and adjusts the printed
image accordingly, so your images
come out just the way you intended
when you recorded them.
*Seiko Epson Corporation holds the
copyright for PRINT Image Matching and
PRINT Image Matching 
III.
Exif Print
Exif Print is an
internationally supported,
open standard file format
that makes it possible to
capture and display vibrant
digital images with accurate
colors. With Exif 2.2, files
include a wide range of
shooting condition
information that can be
interpreted by an Exif Print
printer to produce better-
looking prints.
 IMPORTANT! 
•Information about the availability of Exif Print
compatible printer models can be obtained from each
printer manufacturer.
Downloaded From camera-usermanual.com Casio Manuals 
						

							VIEWING IMAGES ON A COMPUTER
160
VIEWING IMAGES ON A COMPUTER
After using the USB cradle to establish a USB connection
between the camera and your computer, you can use your
computer to view images in file memory and copy images
to your computer’s hard disk or other storage media. In
order to do this, you first need to install the USB driver
located on the CD-ROM (CASIO Digital Camera Software)
that comes bundled with the camera onto your computer.
Note that the procedure you need to perform depends on
whether you are using computer running under Windows
(see below) or a Macintosh (see page 166).Using the Camera with a Windows
Computer
The following are the general steps for viewing and copying
files from a computer running under Windows. You can find
details about each operation in the procedures that follow
below. Note that you should also refer to the
documentation that comes with your computer for other
information about USB connections, etc.
1. If you are running Windows 98, Me, or 2000, install
the USB driver onto your computer.
•You need to perform this step only once, the first
time you connect to your computer.
•If you are running Windows XP, you do not need to
install the USB driver.
2. Use the USB cradle to establish a connection between
the camera and computer.
3. View and copy the images you want.
Downloaded From camera-usermanual.com Casio Manuals