Casio Exilim Ex Z50 Users Guide
Here you can view all the pages of manual Casio Exilim Ex Z50 Users Guide. The Casio manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 131
![Page 131
FILE MANAGEMENT
131
To display a file in the FAVORITE folder
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “Favorites”, and
then press [].
3.Use [] and [] to select “Show”, and then
press [SET].
•If the FAVORITE folder is empty, the message “No
Favorites file!” appears.
4.Use [] (forward) and
[] (back) to scroll
through the files in the
FAVORITE folder.
5.After you are finished viewing files, press
[MENU] twice to exit.
File Name
IMPORTANT!
•Note that a FAVORITE folder is...](http://img.usermanuals.tech/thumb/16/49702/w300_casio_exilim_ex-z50-user-s-guide-130.png "Page 131
FILE MANAGEMENT
131
To display a file in the FAVORITE folder
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “Favorites”, and
then press [].
3.Use [] and [] to select “Show”, and then
press [SET].
•If the FAVORITE folder is empty, the message “No
Favorites file!” appears.
4.Use [] (forward) and
[] (back) to scroll
through the files in the
FAVORITE folder.
5.After you are finished viewing files, press
[MENU] twice to exit.
File Name
IMPORTANT!
•Note that a FAVORITE folder is...")
FILE MANAGEMENT 131 To display a file in the FAVORITE folder 1.In the PLAY mode, press [MENU]. 2.Select the “PLAY” tab, select “Favorites”, and then press []. 3.Use [] and [] to select “Show”, and then press [SET]. •If the FAVORITE folder is empty, the message “No Favorites file!” appears. 4.Use [] (forward) and [] (back) to scroll through the files in the FAVORITE folder. 5.After you are finished viewing files, press [MENU] twice to exit. File Name IMPORTANT! •Note that a FAVORITE folder is...
Page 132
![Page 132
FILE MANAGEMENT
132
To delete a file from the FAVORITE
folder
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “Favorites”, and
then press [].
3.Use [] and [] to select “Show”, and then
press [SET].
4.Press [] ( ).
5.Use [] and [] to select the file you want to
delete from the FAVORITE folder.
6.Use [] and [] to select “Delete”, and then
press [SET].
•To exit the file delete operation without deleting
anything, select “Cancel”.
7.After deleting all of the files you want, use []...](http://img.usermanuals.tech/thumb/16/49702/w300_casio_exilim_ex-z50-user-s-guide-131.png "Page 132
FILE MANAGEMENT
132
To delete a file from the FAVORITE
folder
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “Favorites”, and
then press [].
3.Use [] and [] to select “Show”, and then
press [SET].
4.Press [] ( ).
5.Use [] and [] to select the file you want to
delete from the FAVORITE folder.
6.Use [] and [] to select “Delete”, and then
press [SET].
•To exit the file delete operation without deleting
anything, select “Cancel”.
7.After deleting all of the files you want, use []...")
FILE MANAGEMENT 132 To delete a file from the FAVORITE folder 1.In the PLAY mode, press [MENU]. 2.Select the “PLAY” tab, select “Favorites”, and then press []. 3.Use [] and [] to select “Show”, and then press [SET]. 4.Press [] ( ). 5.Use [] and [] to select the file you want to delete from the FAVORITE folder. 6.Use [] and [] to select “Delete”, and then press [SET]. •To exit the file delete operation without deleting anything, select “Cancel”. 7.After deleting all of the files you want, use []...
Page 133
![Page 133
OTHER SETTINGS
133
OTHER SETTINGS
Configuring Sound Settings
You can configure different sounds to play whenever you
turn on the camera, press the shutter button half-way or all
the way, or perform a key operation.
To configure sound settings
1.Press [MENU].
2.Select the “Set Up” tab, select “Sounds”, and
then press [].
3.Use [] and [] to select the sound whose
setting you want to configure, and then press
[].
Select this setting:
Sound 1 through Sound 5
Off
To do this:
Select a built-in sound
Turn...](http://img.usermanuals.tech/thumb/16/49702/w300_casio_exilim_ex-z50-user-s-guide-132.png "Page 133
OTHER SETTINGS
133
OTHER SETTINGS
Configuring Sound Settings
You can configure different sounds to play whenever you
turn on the camera, press the shutter button half-way or all
the way, or perform a key operation.
To configure sound settings
1.Press [MENU].
2.Select the “Set Up” tab, select “Sounds”, and
then press [].
3.Use [] and [] to select the sound whose
setting you want to configure, and then press
[].
Select this setting:
Sound 1 through Sound 5
Off
To do this:
Select a built-in sound
Turn...")
OTHER SETTINGS 133 OTHER SETTINGS Configuring Sound Settings You can configure different sounds to play whenever you turn on the camera, press the shutter button half-way or all the way, or perform a key operation. To configure sound settings 1.Press [MENU]. 2.Select the “Set Up” tab, select “Sounds”, and then press []. 3.Use [] and [] to select the sound whose setting you want to configure, and then press []. Select this setting: Sound 1 through Sound 5 Off To do this: Select a built-in sound Turn...
Page 134
![Page 134
OTHER SETTINGS
134
Specifying an Image for the Startup Screen
You can specify an image you recorded as the startup
screen image, which causes it to appear on the monitor
screen for about two seconds whenever you press the
power button or [
] (REC) to turn on the camera. The
startup screen image does not appear if you press []
(PLAY) to turn on the camera.
1.Press [MENU].
2.Select the “Set Up” tab, select “Startup”, and
then press [].
3.Use [] and [] to display the image you want
to use as the startup...](http://img.usermanuals.tech/thumb/16/49702/w300_casio_exilim_ex-z50-user-s-guide-133.png "Page 134
OTHER SETTINGS
134
Specifying an Image for the Startup Screen
You can specify an image you recorded as the startup
screen image, which causes it to appear on the monitor
screen for about two seconds whenever you press the
power button or [
] (REC) to turn on the camera. The
startup screen image does not appear if you press []
(PLAY) to turn on the camera.
1.Press [MENU].
2.Select the “Set Up” tab, select “Startup”, and
then press [].
3.Use [] and [] to display the image you want
to use as the startup...")
OTHER SETTINGS 134 Specifying an Image for the Startup Screen You can specify an image you recorded as the startup screen image, which causes it to appear on the monitor screen for about two seconds whenever you press the power button or [ ] (REC) to turn on the camera. The startup screen image does not appear if you press [] (PLAY) to turn on the camera. 1.Press [MENU]. 2.Select the “Set Up” tab, select “Startup”, and then press []. 3.Use [] and [] to display the image you want to use as the startup...
Page 135
OTHER SETTINGS 135 IMPORTANT! •You can select any one of the following types of image as the startup image. —The camera’s built-in image —A snapshot —The image only of an audio snapshot —A movie whose file size is less than the amount of unused built-in memory still available •Only one image can be stored in startup image memory at one time. Selecting a new startup image overwrites anything that is already stored in startup image memory. Because of this, if you want to return to a previous startup...
Page 136
OTHER SETTINGS 136 3.Change the name of the file to one of the following. Snapshot Image: ENDING.JPG Movie Image: ENDING.AVI •You do not need to input the file name extension (JPG or AVI) if your computer is configured to hide file name extensions. File Name: ENDING •Now when you turn off the camera, the power down image you specified above will appear on the monitor screen. IMPORTANT! •Formatting the camera’s flash memory deletes the power down image (page 145). •When both a still image and a movie...
Page 137
![Page 137
OTHER SETTINGS
137
Specifying the File Name Serial Number
Generation Method
Use the following procedure to specify the method for
generating the serial number used for file names (page 127).
1.Press [MENU].
2.Select the “Set Up” tab, select “File No.”, and
then press [].
3.Use [] and [] to change the setting, and
then press [SET].
Select this setting:
Continue
Reset
To do this for a newly saved file:
Store the last file number used and
increment it, regardless of whether
files are deleted or whether...](http://img.usermanuals.tech/thumb/16/49702/w300_casio_exilim_ex-z50-user-s-guide-136.png "Page 137
OTHER SETTINGS
137
Specifying the File Name Serial Number
Generation Method
Use the following procedure to specify the method for
generating the serial number used for file names (page 127).
1.Press [MENU].
2.Select the “Set Up” tab, select “File No.”, and
then press [].
3.Use [] and [] to change the setting, and
then press [SET].
Select this setting:
Continue
Reset
To do this for a newly saved file:
Store the last file number used and
increment it, regardless of whether
files are deleted or whether...")
OTHER SETTINGS 137 Specifying the File Name Serial Number Generation Method Use the following procedure to specify the method for generating the serial number used for file names (page 127). 1.Press [MENU]. 2.Select the “Set Up” tab, select “File No.”, and then press []. 3.Use [] and [] to change the setting, and then press [SET]. Select this setting: Continue Reset To do this for a newly saved file: Store the last file number used and increment it, regardless of whether files are deleted or whether...
Page 138
![Page 138
OTHER SETTINGS
138
5.Press [DISP].
•You could press [SET] in place of [DISP] if you want
to configure the alarm without an image.
6.Use [] and [] to select the scene you want
to appear at the alarm time, and then press
[SET].
7.After all the settings are the way you want,
press [SET].
NOTE
•When an alarm time is reached while the camera is
turned off, the alarm will sound for about one minute
(or until you stop it), and then the camera will turn
on. To stop the alarm after it starts to sound, press...](http://img.usermanuals.tech/thumb/16/49702/w300_casio_exilim_ex-z50-user-s-guide-137.png "Page 138
OTHER SETTINGS
138
5.Press [DISP].
•You could press [SET] in place of [DISP] if you want
to configure the alarm without an image.
6.Use [] and [] to select the scene you want
to appear at the alarm time, and then press
[SET].
7.After all the settings are the way you want,
press [SET].
NOTE
•When an alarm time is reached while the camera is
turned off, the alarm will sound for about one minute
(or until you stop it), and then the camera will turn
on. To stop the alarm after it starts to sound, press...")
OTHER SETTINGS 138 5.Press [DISP]. •You could press [SET] in place of [DISP] if you want to configure the alarm without an image. 6.Use [] and [] to select the scene you want to appear at the alarm time, and then press [SET]. 7.After all the settings are the way you want, press [SET]. NOTE •When an alarm time is reached while the camera is turned off, the alarm will sound for about one minute (or until you stop it), and then the camera will turn on. To stop the alarm after it starts to sound, press...
Page 139
OTHER SETTINGS 139 Setting the Clock Use the procedures in this section to select a Home Time Zone, and to change its date and time settings. If you want to change the time and date setting only without changing the Home Time Zone, perform the procedure under “To set the current time and date” (page 140) only. IMPORTANT! •Make sure you select your Home Time zone (the zone where you are currently located) before changing the time and date settings. Otherwise, the time and date setting will change...
Page 140
![Page 140
OTHER SETTINGS
140
To set the current time and date
1.Press [MENU].
2.Select the “Set Up” tab, select “Adjust”, and
then press [].
3.Set the current date and the time.
Do this:
Press [] or [].
Press [] or [].
Press [DISP].
To do this:
Change the setting at the current
cursor location
Move the cursor between settings
Toggle between 12-hour and 24-
hour timekeeping
4.When all the settings are the way you want,
press [SET] to register them and exit the
setting screen.
Changing the Date Format
You can...](http://img.usermanuals.tech/thumb/16/49702/w300_casio_exilim_ex-z50-user-s-guide-139.png "Page 140
OTHER SETTINGS
140
To set the current time and date
1.Press [MENU].
2.Select the “Set Up” tab, select “Adjust”, and
then press [].
3.Set the current date and the time.
Do this:
Press [] or [].
Press [] or [].
Press [DISP].
To do this:
Change the setting at the current
cursor location
Move the cursor between settings
Toggle between 12-hour and 24-
hour timekeeping
4.When all the settings are the way you want,
press [SET] to register them and exit the
setting screen.
Changing the Date Format
You can...")
OTHER SETTINGS 140 To set the current time and date 1.Press [MENU]. 2.Select the “Set Up” tab, select “Adjust”, and then press []. 3.Set the current date and the time. Do this: Press [] or []. Press [] or []. Press [DISP]. To do this: Change the setting at the current cursor location Move the cursor between settings Toggle between 12-hour and 24- hour timekeeping 4.When all the settings are the way you want, press [SET] to register them and exit the setting screen. Changing the Date Format You can...