Casio Exilim Ex Z30 Users Guide

							USING A MEMORY CARD
141
To copy a file from a memory card to
built-in memory
With this procedure you can copy one file at a time.
1.Perform steps 1 through 3 of the procedure
under “To copy all the files in built-in memory
to a memory card”.
2.Use [] and [] to select “Card  Built-in”,
and then press [SET].
3.Use [
] and [] to select the file you want to
copy.
4.Use [] and [] to select “Copy”, and then
press [SET].
•This starts the copy operation and displays the
message “Busy.... Please wait...”.
•The file reappears on the monitor screen after the
copy operation is complete.
•Repeat steps 3 through 4 to copy other images, if
you want.
5.Press [MENU] to exit the copy operation.
 NOTE 
•Files are copied to the folder in built-in memory
whose name has the largest number.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
142
PRINTING IMAGES
A digital camera provides you with a variety of different
ways to print the images it records. The three main printing
methods are described below. Use the method that best
suits your needs.

 Professional Print Service
The camera’s DPOF feature lets you specify which images
you want to print and how many copies of each you want.
Then, simply take the memory card to a professional print
service where they will print your images in accordance
with your specifications. For more information, see “DPOF”
(page 143).

Printing Directly on a Printer Equipped with
a Card Slot, or a Printer that Supports USB
DIRECT-PRINT or PictBridge
The camera’s DPOF feature lets you specify which images
you want to print and how many copies of each you want.
Then you can plug the memory card into a printer equipped
with a card slot, or connect the camera to a PictBridge or
USB DIRECT-PRINT printer for printing. For more
information, see “DPOF” (page 143) and “Using PictBridge
or USB DIRECT-PRINT” (page 146).

 Printing with a Computer
Windows Users
The camera comes bundled with Photo Loader and
Photohands applications (page 175), which can be installed
on a Windows computer for image transfer, management,
and printing. For more information, see “Viewing Images on
a Computer” (page 151) and “Installing the Software from
the CD-ROM” (page 174).
 IMPORTANT! 
•Refer to the pages referenced above for information
about how to connect the camera to a computer.
Image management procedures are provided in the
following pages of this section.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
143
Macintosh Users
The camera comes bundled with Photo Loader for the
Macintosh, which can be installed for image transfer and
management, but not for printing. Use commercially
available software for printing with a Macintosh.  For more
information, see “Viewing Images on a Computer” (page
151) and “Installing the Software from the CD-ROM” (page
174).
 IMPORTANT! 
•Refer to the pages referenced above for information
about how to connect the camera to a computer.
Image management procedures are provided in the
following pages of this section.
DPOF
The letters “DPOF” stand for “Digital Print
Order Format”, which is a format for
recording on a memory card or other medium
which digital camera images should be
printed and how many copies of the image
should be printed. Then you can print on a
DPOF-compatible printer or at a professional
print service in accordance with the file name
and number of copies settings recorded on
the card.
With this camera, you should always select images by
viewing them on the monitor screen. Do not specify images
by file name without viewing the file contents.

 DPOF Settings
File Name,
number of copies,
date
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
144
To configure print settings for a single
image
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab,
select “DPOF”, and
then press [].
3.Use [] and [] to select “Select images”,
and then press [].
4.Use [
] and [] to
display the image you
want.
5.Use [] and [] to specify the number of
copies.
•You can specify up to 99 for the number of copies.
Specify 00 if you do not want to have the image
printed.
6.To turn on date stamping for the prints, press
[DISP] so 12121 is displayed.
•12121 indicates that date stamping is turned on.
•To turn off date stamping for the prints, press [DISP]
so 
12121 is not displayed.
•Repeat steps 4 through 6 if you want to configure
other images for printing.
7.After all the settings are the way you want,
press [SET] to apply them.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
145
To configure print settings for all images
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “DPOF”, and
then press [].
3.Use [] and [] to select “All images”, and
then press [].
4.Use [] and [] to
specify the number of
copies.
•You can specify up to 99
for the number of copies.
Specify 00 if you do not
want to have the image
printed.
5.To turn on date stamping for the prints, press
[DISP] so 12121 is displayed.
•12121 indicates that date stamping is turned on.
•To turn off date stamping for the prints, press [DISP]
so 
12121 is not displayed.
6.After all the settings are the way you want,
press [SET] to apply them.
 IMPORTANT! 
•If you take a memory card to a professional print
service, be sure to tell them that it includes DPOF
settings for the images to be printed and the number
of copies. If you don’t, they may print all images on
the card, including the ones you do not want printed.
•Note that some professional print services do not
support DPOF printing. Check with your service
before ordering prints.
•Some printers may have settings that disable date
stamp and/or DPOF printing. See the user
documentation that comes with your printer for
details about how to enable these features.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
146
To print a single image
1.In the REC mode or the PLAY mode, press
[MENU].
2.Select the “Set Up” tab, select “USB”, and
then press [].
3.Use [] and [] to select the setting you
want, and then press [SET].
Using PictBridge or USB DIRECT-PRINT
You can connect the camera
directly to a printer that supports
PictBridge or USB DIRECT-PRINT,
and perform image selection and
printing using the camera monitor
screen and controls. DPOF support
(page 143) also lets you specify
which images you want to print and
how many copies of each should be
printed.
•PictBridge is a standard
established by the Camera and
Imaging Products Association
(CIPA).
•USB DIRECT-PRINT is a
standard proposed by Seiko
Epson Corporation.
Select this setting:
Mass Storage (USBDIRECT-PRINT)
PTP (PictBridge) When connecting to this type of
device:
Computer or USB DIRECT-
PRINT-compatible printer
PictBridge-compatible printer
•Mass Storage (USB DIRECT-PRINT) causes the
camera to see the computer as an external storage
device. Use this setting for normal transfer of images
from the camera to a computer (using the bundled
Photo Loader application).
•PTP (PictBridge) simplifies the transfer of image data
to the connected device.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
147
4.Use the USB cable that comes with the
camera to connect the USB cradle to a printer.
•Also, connect the AC adaptor to the USB cradle and
plug the AC adaptor into an electrical outlet.
•If you are using battery power without the AC
adaptor, make sure that the battery is fully charged.
5.Set the camera on the USB cradle.
6.Turn on the printer.
7.Load paper for printing the images into the
printer.
8.Press the USB cradle’s [USB] button.
•This displays the print menu on the camera’s monitor
screen.
USB
9.On the print menu,
select “1 Image”, and
then press [SET].
•You can use [
] and []
to select the image you
want to print.
•You can toggle date
stamping of the image on
and off by pressing
[DISP]. The 
12121 icon
indicates that date
stamping is turned on.
10.On the camera’s
monitor screen, use
[] and [] to select
“Print”, and then
press [SET].
•This starts printing and
displays the message
“Busy.... Please wait...” on the monitor screen. The
message will disappear after a short while, even
though printing is still being performed. Pressing any
of the camera’s buttons while printing is in progress
will cause the message to reappear.
•The print menu will appear when printing is
complete.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
148
To print a group of images
1.Use the DPOF procedure on page 144 to
specify the images in file memory that you
want to print.
2.Perform steps 1 through 8 of the procedure
under “To print a single image” on page 146.
3.On the print menu, select “DPOF”, and then
press [SET].
4.On the camera’s monitor screen, use [] and
[] to select “Print”, and then press [SET].
•This starts printing and displays the message
“Busy.... Please wait...” on the monitor screen. The
message will disappear after a short while, even
though printing is still being performed. Pressing any
of the camera’s buttons while printing is in progress
will cause the message to reappear.
•The print menu will appear when printing is
complete.
•This automatically starts printing of the images you
specified with the DPOF procedure.
•To print again, repeat the above from step 3. •To print again, repeat the above from step 9.
11.After you are finished printing, press the USB
cradle’s [USB] button, and then turn off the
camera.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
149
Printing Precautions
•See the documentation that comes with your printer for
information about print quality and paper settings.
•Contact your printer manufacturer for information about
models that support PictBridge and USB DIRECT-PRINT,
upgrades, etc.
•Never disconnect the USB cable, or perform any camera
or USB cradle operation while printing is in progress.
Doing so causes a printer error. •A message appears on the monitor screen, followed
by the DPOF setting screen (page 144), if there are
no DPOF settings currently configured on the
camera to control the printing operation. If this
happens, configure the required DPOF settings and
then perform step 6 of the above procedure again.
•If you want to change the current DPOF settings,
select “DPOF” on the print menu to display the
DPOF setting screen (page 144).
5.After you are finished printing, press the USB
cradle’s [USB] button, and then turn off the
camera.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
150
PRINT Image Matching II
Images include PRINT Image MatchingII data (mode setting and other camera
setup information). A printer that
supports PRINT Image Matching 
IIreads this data and adjusts the printed
image accordingly, so your images
come out just the way you intended
when you recorded them.
*Seiko Epson Corporation holds the
copyright for PRINT Image Matching and
PRINT Image Matching 
II.
Exif Print
Exif Print is an
internationally supported,
open standard file format
that makes it possible to
capture and display vibrant
digital images with accurate
colors. With Exif 2.2, files
include a wide range of
shooting condition
information that can be
interpreted by an Exif Print
printer to produce better-
looking prints.
 IMPORTANT! 
•Information about the availability of Exif Print
compatible printer models can be obtained from each
printer manufacturer.
Downloaded From camera-usermanual.com Casio Manuals