Casio Exilim Ex V8 Users Guide

271APPENDIX
■PLAY Mode
PLAY Tab Menu
USBMass Storage (USB DIRECT-PRINT)* / 
PTP (PictBridge)
Video OutNTSC 4:3 / NTSC 16:9 / PAL 4:3 / PAL 16:9
FormatFormat / Cancel*
ResetReset / Cancel*
SlideshowStart* / Images / Time / Interval / Effect / 
Cancel
Layout Print–
MOTION PRINT9 frames* / 1 frame / Cancel
 Anti ShakeOn / Off*
Movie EditingCut (Before) / 
Cut (Between) / 
Cut (After) / Cancel*
Dynamic RangeExpand +2 / Expand +1 / Cancel*
White Balance(Daylight) / (Overcast) /
(Shade) / (Day White...

272APPENDIX “Set Up” Tab
•The contents of the “Set Up” tab are the same in a REC mode 
and PLAY mode.The camera has lamps: an Operation Lamp and an AF assist/
REC light/self-timer Lamp. These lamps light and flash to 
indicate the current operational status of the camera.
RotationRotate* / Cancel
Resize6M (2816 × 2112)* / 4M (2304 × 1728) / 
VGA (640 × 480) / Cancel
Trimming–
Dubbing–
CopyBuilt-in  Card* / Card   Built-in / Cancel
Indicator Lamps
Operation Lamp
AF assist/REC light/
self-timer Lamp...

273APPENDIX
■REC ModeIMPORTANT!
•Never remove the memory card from the camera while the 
operation lamp is flashing green. Doing so will cause the 
image you shot to be lost.
■PLAY mode
Operation LampMeaningColorStatus
GreenLitOperational (Power on, recording enabled). / 
Auto Focus operation was successful. / LCD 
is off or in sleep state.
FlashingStoring movie or processing image. / Image is 
being stored. / Cannot Auto Focus. / Card is 
being formatted. / Powering down.
RedLitMemory card is locked. /...

274APPENDIX
■USB Cradle Indicator Lamps
The USB cradle has two indicator lamps: a [CHARGE] lamp and 
a USB lamp. These lamps light and flash to indicate the current 
operational status of the cradle and camera.
[CHARGE] lamp
USB Lamp
[CHARGE] LampUSB LampMeaningColorStatusColorStatus
Red Lit Charging
Green Lit Charging complete
Green Flashing Charge standby
Red Flashing Charge error
Green Lit USB connection
Green Flashing Memory being accessed.
Downloaded From camera-usermanual.com Casio Manuals 

275APPENDIX
Finding the Problem and Fixing It
Troubleshooting Guide
ProblemPossible Causes and Action
Power Supply
Power does not turn on. 1) The battery may not be oriented correctly (page 36).
2) The battery may be dead. Charge the battery (page 36). If the battery goes dead soon after being 
charged, it means the battery has reached the end of its life and needs to be replaced. Purchase a 
separately available CASIO NP-50 rechargeable lithium ion battery.
The battery won’t charge. The battery may not...

276APPENDIX
The subject is out of focus in 
the recorded image.The image may not be focused properly. When composing the image, make sure the subject is located 
inside the focus frame.
The flash does not fire. 1) If “ ” (Flash Off) is selected as the flash mode, change to another mode (page 72).
2) If the battery is dead, charge it (page 36).
3) If a BEST SHOT scene that uses the “ ” (Flash Off) flash mode is selected, change to a different 
flash mode (page 72) or select a different BEST SHOT scene...

277APPENDIX
An image I shot was not 
saved.1) Camera power may have been turned off before the save operation was complete, which will result in 
the image not being saved. When the battery indicator shows “ ”, charge the battery as soon as 
possible (page 36).
2) You may have removed the memory card from the camera before the save operation was complete, 
which will result in the image not being saved. Do not remove the memory card before the save 
operation is complete.
Though available lighting is...

278APPENDIX
Playback
The color of the playback 
image is different from what 
appears on the monitor 
screen when shooting.Sunlight or light from another source may be shining directly into the lens when you are shooting. Position 
the camera so sunlight does not shine directly into the lens.
Images are not displayed. This camera cannot display non-DCF images recorded onto a memory card using another digital camera.
I can’t edit images (layout 
print, resizing, trimming, 
keystone correction, color...

279APPENDIX
Other
The wrong date and time are 
displayed.The date and time setting is wrong. Set the correct date and time (page 210).
The messages on the display 
are in the wrong language.The wrong display language is selected. Change the display language setting (page 214).
I can’t transfer images over a 
USB connection.1) The USB cable may not be connected securely. Check all connections.
2) If your computer is running Windows 98SE or 98, the USB driver may not be installed. Install the USB 
driver...

280APPENDIX
Display Messages
ALERTThe camera’s protection function may have 
activated because camera temperature is too 
high. Turn off the camera and wait until it cools 
down before trying to use it again. 
 Any of the following may occur after the 
“ALERT” message appears.
1) Power turns off. 
2) Movie recording is impossible or movie 
length is limited. 
3) Monitor screen brightness setting changes 
to 0. 
Battery is low.Battery power is low.
Cannot correct 
image!Keystone correction of the image...