Casio Exilim Ex S200 Users Guide

							91Other Playback Functions (PLAY)
.PLAY Menu Operations in This Manual
PLAY menu operations are represented in this manual as shown below. The following 
operation is the same one described under “Example PLAY Panel Operation” on 
page 90.
 MenuDisplays the PLAY menu. You can perform the following 
operations on the PLAY menu.
1Use [4] and [6] to select the tab 
where the menu item you want to 
configure is located.
2Use [8] and [2] to select the menu 
item you want, and then press [6].
3Use [8] and [2] to change the 
setting of the selected menu item.
4Press [SET] to apply the setting.
NOTE
• Pressing [AUTO] performs one of the following operations.
– If you previously selected a tab, pressing [AUTO] returns to 
the viewfinder screen.
– If you previously selected menu item, pressing [AUTO] 
returns to the tab.
à
Selected menu item
Tabs
Procedure
[p] (PLAY) * [SET] * MENU * PLAY Tab * Protect
Use [8] and [2] to select the bottom PLAY Panel 
item (MENU) and then press [SET].
Use [4] and [6] to select the 
“PLAY” tab.
Press 
[p] (PLAY).Press [SET].
Use [8] and [2] to select 
“Protect” and then press [6].
Downloaded From camera-usermanual.com Casio Manuals 
						

							92Other Playback Functions (PLAY)
1.In the PLAY mode, press [SET].
2.Use [8] and [2] to select the third PLAY Panel item from the bottom 
(Slideshow) and then press [SET] (page 90).
Playing a Slideshow on the Camera (Slideshow)
Start
Starts the slideshow.
Images
Specifies the type of images to be included in the slideshow.
All images: Snapshots, movies, and audio recordings
T Only: Snapshots and audio snapshots only
» Only: Movies only
Time
Time from the start to the end of the slideshow
1 to 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes
Interval
Amount of time each image remains displayed
Use [4] and [6] to select a value from 1 to 30 seconds, or “MAX”.
If you specify a value from 1 to 30 seconds, images change at the specified 
interval, but the audio portion of movies and audio snapshots will continue to 
play until the end.
When the slideshow reaches a movie file while “MAX” is selected, only the first 
frame of the movie will displayed. Voice Recording files are not played back 
when “MAX” is selected.
Downloaded From camera-usermanual.com Casio Manuals 
						

							93Other Playback Functions (PLAY)
• To stop the slideshow, press [AUTO]. Pressing [SET] instead of [AUTO] stops the 
slideshow and returns to the menu screen.
• Adjust audio volume by pressing [2] and then press [8] or [2] during playback.
• All button operations are disabled while the slideshow is transitioning from one 
image to another.
• The time required for transition from one image to another may be longer in the 
case of an image that was not recorded with this camera.
You can replace the built-in slideshow background music with other music from your 
computer.
Supported File Types:
• PCM format (16-bit, monaural) WAV files
• Sampling Frequencies: 11.025 kHz/22.05 kHz/44.1 kHz
Number of Files: 9
File names: SSBGM001.WAV to SSBGM009.WAV
• Create the music files on your computer using the above names.
• Regardless of which effect pattern you select, the BGM files you store in camera 
memory are played back in name sequence.
Effect
Select the effect you want.
Pattern 1 to 5: Plays background music and applies an image change effect.
• Patterns 1 through 4 have different background music, but they all use the 
same image change effect.
• Pattern 5 can be used for playback of snapshots only, and the “Interval” 
setting is ignored.
• The currently selected image change effect setting is disabled automatically 
in following cases.
– When playing a slideshow for which “» Only” is selected for the “Images” 
setting
– When the interval setting is “MAX”, 1 second or 2 seconds.
– Before and after playback of a movie or Voice Recording file
Off: No image change effect or background music
Saving Music from Your Computer to Camera Memory
Downloaded From camera-usermanual.com Casio Manuals 
						

							94Other Playback Functions (PLAY)
1.Connect the camera to your computer (pages 116, 125).
If you plan to save the music files to the camera’s memory card, make sure the 
card is loaded in the camera.
2.Perform one of the following operations to open the memory card or 
built-in memory.
This will cause the camera to be recognized by your computer as a Removable 
Disk (Drive).
• Windows
1Windows 7 / Windows Vista: Start * Computer
Windows XP: Start * My Computer
Windows 2000: Double-click “My Computer”.
2Double-click “Removable Disk”.
•Macintosh
1Double-click the camera’s drive icon.
3.Create a folder named “SSBGM”.
4.Double-click the “SSBGM” folder you created and copy the 
background music file to it.
• See the user documentation that comes with your computer for information 
about moving, copying, and deleting files.
• If there are background music files both in built-in memory and on the memory 
card loaded in the camera, the files on the memory card take priority.
• See page 132 for information about camera folders.
5.Disconnect the camera from the computer (pages 118, 127).
Downloaded From camera-usermanual.com Casio Manuals 
						

							95Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [SET] * MENU * PLAY Tab * 
Art Effect
You can transform an image into an artistic image. The transformed image is saved 
as 3M (2048x1536 pixels) size.
Any one of the following art effects can be applied to an image: Oil Painting, Crayon, 
Water Color.
NOTE
• If the original image is smaller than 3M (2048x1536 pixels) size, the new 
(transformed) version will be the same size as the original.
• The original image is retained in memory and not deleted.
• When you display a transformed image on the camera’s monitor screen, the date 
and time indicates when the image was originally recorded, not when the image 
was transformed.
• Only 4:3 images recorded with this camera can be transformed using Art Effect.
• You also can use BEST SHOT scenes to apply an art effect when recording an 
image (page 55).
Procedure
[p] (PLAY) * Snapshot Screen * [SET] * MENU * PLAY Tab * 
DPOF Printing
See page 111 for details.
Applying an Artistic Effect (Art Effect)
Selecting Images for Printing (DPOF Printing)
Downloaded From camera-usermanual.com Casio Manuals 
						

							96Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * [SET] * MENU * PLAY Tab * Protect
IMPORTANT!
• Note that even if a file is protected, it will be deleted if you perform the format 
operation (page 143).
Protecting a File Against Deletion (Protect)
OnProtects specific files.
1Use [4] and [6] to scroll through the files 
until the one you want to protect is 
displayed.
2Use [8] and [2] to select “On” and then 
press [SET].
An image that is protected is indicated by 
the › icon.
3To protect other files, repeat steps 1 and 2.
To exit the protect operation, press [AUTO]. To unprotect a file, 
select “Off” instead of “On” in step 2 above.
All Files: 
OnProtects all files.1Use [8] and [2] to select “All Files: On” and then press [SET].
2Press [AUTO].
To unprotect all files, select “All Files: Off” instead of “All Files: On” in 
step 1 above.
Downloaded From camera-usermanual.com Casio Manuals 
						

							97Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [SET] * MENU * PLAY Tab * 
Date/Time
When the date and time settings are what you want, press [SET] to apply them.
NOTE
• The date and time stamped into an image using the Time Stamp (page 138) cannot 
be edited.
• You cannot edit the date and time of an image that is protected.
• You can input any date from 1980 to 2049.
Procedure
[p] (PLAY) * Snapshot or Movie Screen * [SET] * MENU * 
PLAY Tab * Rotation
1.Use [8] and [2] to select “Rotation” and then press [SET].
Each press of [SET] will rotate the displayed image 90 degrees left.
2.When the displayed image is at the orientation you want, press [AUTO].
NOTE
• Note that this procedure does not actually change the image data. It simply alters 
how the image is displayed on the camera’s monitor screen.
• An image that has been protected or zoomed cannot be rotated.
• The original (unrotated) version of the image will be displayed on the image menu 
screen and the calendar screen.
Editing the Date and Time of an Image (Date/Time)
[8] [2]Changes the setting at the cursor location.
[4] [6]Moves the cursor between settings.
[0] (Movie)Toggles between 12-hour and 24-hour format.
Rotating an Image (Rotation)
Downloaded From camera-usermanual.com Casio Manuals 
						

							98Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [SET] * MENU * PLAY Tab * 
Resize
You can reduce the size of a snapshot and save the result as a separate snapshot. 
The original snapshot is also retained. You can select resize an image to one of three 
image sizes: 10M, 6M, VGA.
• Resizing a 3:2 or 16:9 size snapshot will create an image with an aspect ratio of 
4:3, with both sides cut off.
• The recording date of the resized version of the snapshot will be the same as the 
recording date of the original snapshot.
Procedure
[p] (PLAY) * Snapshot Screen * [SET] * MENU * PLAY Tab * 
Trimming
You can crop a snapshot to trim parts you do not need, 
and save the result in a separate file. The original 
snapshot is also retained.
Use the zoom controller to zoom the image to the size you 
want, use [8], [2], [4], and [6] to display the portion of 
the image you want to cut out, and then press [SET].
• The image produced by cropping a 3:2 or 16:9 image 
will have an aspect ratio of 4:3.
• The recording date of the cropped image will be the 
same as the recording date of the original snapshot.
Resizing a Snapshot (Resize)
Cropping a Snapshot (Trimming)
Represents
snapshot area
Part of snapshot that is
currently displayed
Zoom factor
Downloaded From camera-usermanual.com Casio Manuals 
						

							99Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [SET] * MENU * PLAY Tab * 
Dubbing
2.Press [SET] again to stop audio recording.
• Take care that you do not block the camera’s microphone 
with your fingers while recording.
• Good recording results are not possible when the camera is 
too far away from what you are trying to record.
• Your camera supports the following audio data formats.
– Audio Format: WAVE/IMA-ADPCM (WAV extension)
• You cannot add audio to an image that is protected.
• To delete audio, perform the following operation:
Dubbing * Delete * [SET] * [AUTO].
IMPORTANT!
• Note that you cannot restore the original audio of an Audio Snapshot after you 
delete or re-record it.
1.In the PLAY mode, use [4] and [6] to scroll through the images until 
the Audio Snapshot you want is displayed.
An audio snapshot is one that has a ˆ icon.
2.Press [0] (Movie) to start playback.
Adding Audio to a Snapshot (Dubbing)
You can add audio to a snapshot after you shoot it. 
You can re-record a snapshot’s audio whenever you 
want. You can record up to about 30 seconds of audio 
for a single snapshot.
1.Press [SET] to start audio recording.
Remaining recording time
To play snapshot audio
Microphone
Downloaded From camera-usermanual.com Casio Manuals 
						

							100Other Playback Functions (PLAY)
Voice Recording Playback Controls
• Audio of an Audio Snapshot also can be played back on a computer with Windows 
Media Player or QuickTime.
Procedure
[p] (PLAY) * Snapshot Screen * [SET] * MENU * PLAY Tab * 
Copy
Files can be copied from the camera’s built-in memory to a memory card or from a 
memory card to built-in memory.
NOTE
• You can copy snapshots, movies, audio snapshots, or Voice Recording files you 
recorded with this camera.
• When a copied image appears on the full-month calendar screen, it is displayed on 
the date that it was copied (page 87).
Fast forward/fast reverse[4] [6]
Play/pause[SET]
Volume adjustmentPress [2] and then 
press [8] [2].
Display content switching[8] (DISP)
Stop playback[0] (Movie)
Copying Files (Copy)
Built-in * CardCopies all files from built-in camera memory to a memory card.
This option copies all the files in built-in camera memory. It 
cannot be used to copy a single file.
Card * Built-inCopies a single file on the memory card to camera built-in 
camera memory. Files are copied to the folder in built-in 
memory whose name has the largest serial number.
1Use [4] and [6] to select the file you want to copy.
2Use [8] and [2] to select “Copy” and then press [SET].
Downloaded From camera-usermanual.com Casio Manuals