Casio Exilim Ex S200 Users Guide

81Viewing Snapshots and Movies
Viewing Snapshots and Movies
See page 29 for the procedure for viewing snapshots.
1.Press [p] (PLAY) and then use [4] and [6] to display the movie you 
want to view.
2.Press [0] (Movie) to start 
playback.
Movie Playback Controls
• Playback may not be possible for movies not recorded with this camera.
Viewing Snapshots
Viewing a Movie
Fast forward/
fast reverse[4] [6]
• Each press of either button increases the speed of the fast 
forward or fast reverse operation.
• To...

82Viewing Snapshots and Movies
The Movie Editing feature lets you use one of the following procedures to edit out a 
specific part of a movie.
1.To pause movie playback, press [SET].
2.Press [2].
3.Use [8] and [2] to select the editing method you want to use and then 
press [SET].
4.Use [4] and [6] to scroll through the movie and 
search for the frame (point) from which or to 
which you want to cut the movie (the cut point).
• You also can search for the cut location by playing 
back the movie and...

83Viewing Snapshots and Movies
5.When the frame where you want the cut point to be is displayed, press 
[2].
6.Use [8] and [2] to select “Yes” and then press [SET].
The selected cut operation will take considerable time to complete. Don’t try to 
perform any camera operation until the “Busy... Please wait...” message 
disappears from the monitor screen. Note that a cut operation can take a long 
time if the movie being edited is long.
IMPORTANT!
• When you edit a movie, only the result is saved. The...

84Viewing Snapshots and Movies
Each time you perform a continuous shutter (CS) operation, the camera creates a CS 
group that includes all of the images for that particular CS session. You can use the 
following procedure to play back the images in a particular CS group.
1.Press [p] (PLAY) and then use [4] and [6] to display the CS group 
whose images you want to view.
2.Press [0] (Movie) to start playback the images in the CS group.
This will play back the images in the CS group you selected.
Playback...

85Viewing Snapshots and Movies
You can delete CS images (1 image in CS group, selected images in CS group, 1 CS 
group) while playback is in progress or paused.
1.While CS image playback is in progress or paused, press [2] ( ).
2.Next, perform the same operations you would perform to delete normal 
(non-CS) images (page 30).
Use the following to divide up a CS Group into individual images.
.Dividing Up a Specific CS Group
1.While a CS group is displayed, press [SET].
2.Use [8] and [2] to select the...

86Viewing Snapshots and Movies
.Dividing Up All CS Groups
1.While a CS group is displayed, press [SET].
2.Use [8] and [2] to select the bottom PLAY Panel item (MENU) and 
then press [SET] (page 90).
3.Use [4] and [6] to select the “PLAY” tab.
4.Use [8] and [2] to select “Divide Group” and then press [6].
5.Use [8] and [2] to select “Divide All Groups” and then press [SET].
6.Use [8] and [2] to select “Yes”, and then press [SET].
• Once a CS group is divided, it cannot be regrouped.
1.In the PLAY mode,...

87Viewing Snapshots and Movies
1.In the PLAY mode, slide the zoom controller 
towards w (]).
Use [8], [2], [4] and [6] to move the selection 
boundary around the image menu.
To view a particular image, use [8], [2], [4], or [6] to 
move the selection boundary to the image you want 
and then press [SET].
1.In the PLAY mode, slide the zoom controller towards w (]) twice.
This will display the calendar screen that shows the first image recorded on each 
day.
To display the first image recorded on a...

88Viewing Snapshots and Movies
1.Use the AV cable that comes with the camera to connect it to the TV.
• Make sure that you insert the cable connector into the 
USB/AV port until you feel it click securely into place. 
Failure to insert the connector fully can result in poor 
communication or malfunction.
• Note that even while the connector is fully inserted, you 
still will be able to see the metal part of the connector as 
shown in the illustration.
2.Turn on the TV and select its video input mode.
If...

89Viewing Snapshots and Movies
IMPORTANT!
• Before connecting to a TV to display images, be sure to configure the camera’s 
[r] (REC) and [p] (PLAY) buttons for “Power On” or “Power On/Off” (page 141).
• Audio is initially output by the camera at maximum volume. When you first start 
displaying images, set the TV volume control at a relatively low level and then 
adjust it as required.
NOTE
• Audio is monaural.
• Certain TVs may cut off part of the images.
• All icons and indicators that appear on the...

90Other Playback Functions (PLAY)
Other Playback Functions (PLAY)
This section explains menu items that you can use to configure settings and perform 
other playback operations.
Pressing [SET] in the PLAY mode will display the PLAY Panel.
.Example PLAY Panel Operation
1.In the PLAY mode, press [SET].
The PLAY Panel will appear along the 
right side of the monitor screen.
2.Use [8] and [2] to select the 
PLAY Panel item you want, and 
then press [SET].
3.The following describes the operations you can...