Casio Exilim EX S200 User Manual

							161Appendix
A recorded image 
was not saved.1)Camera power may have been turned off before the save 
operation was complete, which will result in the image not 
being saved. If the battery indicator shows  , charge the 
battery as soon as possible (page 18).
2) You may have removed the memory card from the camera 
before the save operation was complete, which will result in 
the image not being saved. Do not remove the memory card 
before the save operation is complete.
Though available 
lighting is bright, 
the faces of people 
in the image are 
dark.Not enough light is reaching the subjects. Change the flash 
mode setting to <
 (Flash On) for daylight synchro flash (page 
38), or adjust EV shift to the + side (page 77).
Night shots come 
out bad.Use the following BEST SHOT scenes (page 55) when shooting 
at night.
• Night Scene (for shooting night scenery only)
• Night Scene Portrait (for shooting people against night 
scenery)
Subjects are too 
dark when shooting 
images in a 
seashore or ski 
area.Sunlight reflected by water, sand, or snow, can cause 
underexposure of images. Change the flash mode setting to <
 
(Flash On) for daylight synchro flash (page 38), or adjust EV 
shift to the + side (page 77).
The focus frame 
does not appear on 
the monitor screen.Normally, turning off the camera while “Detect Smile” is 
selected for Auto Shutter will cause the camera’s face detection 
setting to change. You will need to change the face detection 
setting again after turn on the camera. You can tell the camera 
to remember the Auto Shutter setting by selecting “On” for the 
“Auto Shutter” power on default setting (page 73).
Digital zoom 
(including HD 
zoom and Single 
SR Zoom) does not 
work. The zoom 
bar indicates zoom 
only up to a zoom 
factor of 4.0.1) Date stamping may be turned on, which will cause digital 
zoom to be disabled. Turn off date stamping (page 138).
2) Digital zoom is disabled when some BEST SHOT scenes 
(Business cards and documents, White board, etc.) are 
selected. Select another scene (page 55).
ProblemPossible Cause and Recommended Action
Downloaded From camera-usermanual.com Casio Manuals 
						

							162Appendix
When shooting 
with Auto Shutter, 
the shutter does 
not trigger.Auto Shutter may not trigger when shooting under very bright or 
very dark conditions, or when shooting a fast moving subject, 
etc. If this happens, try changing the Auto Shutter Trigger 
Sensitivity setting (page 71), or press the shutter button all the 
way down to release the shutter and shoot the image.
The image is out of 
focus during movie 
recording.1) Focusing may not be possible because the subject is outside 
the focus range. Shoot within the allowable range.
2)The lens may be dirty. Clean the lens (page 149).
Playback
The color of the 
playback image is 
different from what 
appears on the 
monitor screen 
when shooting.Sunlight or light from another source may be shining directly 
into the lens when you are shooting. Position the camera so 
sunlight does not shine directly into the lens.
Images are not 
displayed.This camera cannot display non-DCF images recorded onto a 
memory card using another digital camera.
Images cannot be 
edited (with 
resizing, trimming, 
date/time editing, 
rotation).Note that you cannot edit the following types of snapshots.
•Movies
• Snapshots recorded with another camera
File Deletion
A file cannot be 
deleted.1)The file may be protected. Unprotect the file (page 96).
2)“Ü Disabled” setting may be “On”. Change the setting to 
“Off” (page 142).
ProblemPossible Cause and Recommended Action
Downloaded From camera-usermanual.com Casio Manuals 
						

							163Appendix
Other
The wrong date 
and time are 
displayed, or the 
wrong date and 
time are being 
stored along with 
image data.The date and time setting is off. Set the correct date and time 
(page 139).
The messages on 
the display are in 
the wrong 
language.The wrong display language is selected. Change the display 
language setting (page 140).
Images cannot be 
transferred over a 
USB connection.1) The USB cable may not be connected securely. Check all 
connections.
2) The wrong USB communication protocol is selected. Select 
the correct USB communication protocol in accordance with 
the type of device you are connecting (pages 116, 125).
3)If the camera is not turned on, turn it on.
4) Your computer may not be able to recognize the camera if 
you connect via a USB hub. Always connect directly to the 
computer’s USB port.
Language selection 
screen appears 
when the camera is 
turned on.1) You did not configure initial settings after purchasing the 
camera or the camera may have been left with a dead 
battery. Check the camera setup (pages 19, 140).
2) There may be a problem with the camera’s memory data. If 
this is the case, perform the reset operation to initialize the 
camera’s setup (page 144). After that, configure each setting. 
If the language selection screen does not re-appear when you 
turn the camera on, it means that the camera’s memory 
management data has been restored.
If the same message appears after you turn power back on, 
contact your retailer or a CASIO authorized service center.
ProblemPossible Cause and Recommended Action
Downloaded From camera-usermanual.com Casio Manuals 
						

							164Appendix
The time and date 
settings configured 
the first time after 
purchasing the 
camera are reset to 
their factory 
defaults when 
remove the 
camera’s battery.Load the camera’s battery and reconfigure the time and date 
settings (page 19). Do not remove the battery from the camera 
for at least 24 hours after configuring time and date settings. 
After that, the settings will not be reset if you remove the 
battery.
• If the time and date are reset to their factory default settings 
when you remove the battery after it has been loaded for 
more than 24 hours, it could mean that the camera’s setting 
memory is defective. Contact your retailer or a CASIO 
authorized service center.
Buttons are not 
responsive right 
after the power has 
been turned on.With large capacity memory cards there is a delay after the 
power has been turned on before the buttons become 
responsive.
Display Messages
ALERTThe camera’s protection function may have activated 
because camera temperature is too high. Turn off the 
camera and wait until it cools down before trying to use it 
again.
Battery is low.Battery power is low.
Cannot correct 
image!Keystone correction of the image cannot be performed for 
some reason. The image will be stored as-is, without 
correction (page 60).
Cannot find the 
file.The image you specified with the slideshow “Images” setting 
cannot be found. Change the “Images” setting (page 92) and 
try again.
Cannot register 
any more files.You are attempting to save a user BEST SHOT scene in the 
“SCENE” folder when the folder already contains 999 user 
scenes (page 58).
Card ERRORThere is something wrong with the memory card. Turn off the 
camera, remove the memory card and then reload it into the 
camera. If this message re-appears when you turn the 
camera back on, format the memory card (page 143).IMPORTANT!
• Formatting a memory card deletes all its files. Before 
formatting, try transferring recoverable files to a computer 
or some other storage device.
ProblemPossible Cause and Recommended Action
Downloaded From camera-usermanual.com Casio Manuals 
						

							165Appendix
Check 
connections!You are attempting to connect the camera to a printer while 
the camera’s USB settings are not compatible with the USB 
system of the printer (page 109).
Files could not be 
saved because 
battery is low.Battery power is low, so an image file could not be saved.
Folder cannot be 
created.You are trying to record a file while there are already 9999 
files stored in the 999th folder. If you want to record more, 
delete files you no longer need (page 30).
Images are being 
transferred.
Stop transfer and 
turn off power?You are attempting to turn off power while image data is 
being transferred using the Eye-Fi card (page 129). 
LENS ERRORThis message appears and the camera turns off whenever 
lens performs some unexpected operation. If the same 
message appears after you turn power back on, contact a 
CASIO authorized service center or your original retailer.
LENS ERROR 2The Camera Shake unit may be malfunctioning. If the same 
message appears after you turn power back on, contact your 
retailer or a CASIO authorized service center.
Load paper!The printer ran out of paper while printing.
Memory FullMemory is full with images you recorded and/or files saved 
by editing operations. Delete files you no longer need (page 
30).
No subjects in 
memory. Use the 
BS “Dynamic 
Photo” to shoot a 
subject.There is no extracted subject in camera memory that can be 
inserted into a background image.
Printing ErrorAn error occurred while printing.
• The printer is turned off.
• The printer generated an error, etc.
Record ErrorImage compression could not be performed for some reason 
during image data storage. Shoot the image again.
Downloaded From camera-usermanual.com Casio Manuals 
						

							166Appendix
RETRY POWER ONThe lens came into contact with an obstruction while moving. 
The camera will turn off automatically when this message 
appears. Remove the obstruction and turn power back on 
again.
SYSTEM ERRORYour camera system is corrupted. Contact your retailer or a 
CASIO authorized service center.
The card is locked.The LOCK switch of the SD or SDHC 
memory card loaded in the camera is in the 
locked position. You cannot store images to 
or delete images from a memory card that is 
locked.
There are no files.There are no files in built-in memory or on the memory card.
There are no 
printing images.
Set up DPOF.There are currently no files specified for printing. Configure 
the required DPOF settings (page 111).
There is no image 
to register.The setup you are trying to save is for an image that cannot 
be saved as a user BEST SHOT scene.
This card is not 
formatted.The memory card loaded in the camera is not formatted. 
Format the memory card (page 143).
This file cannot be 
played.The file you are trying to access is corrupted or is a type that 
cannot be displayed by this camera.
This function 
cannot be used.This message will appear part way through an operation 
when you attempt to use a function that is not allowed in 
combination with another function.
LOCK
Downloaded From camera-usermanual.com Casio Manuals 
						

							167Appendix
Snapshot
Number of Snapshots/Movie Recording Time/
Voice Recording Time
Image Size 
(Pixels)Image QualityApproximate 
Image File 
SizeBuilt-in Memory 
(Approx. 34.9MB*1) 
Snapshot Recording 
CapacitySD Memory Card 
(1GB*2) Snapshot 
Recording 
Capacity
14M
(4320x3240)Fine 9.31 MB 3 103
Normal 4.86 MB 7 199
3:2
(4320
x2880)Fine 8.19 MB 4 118
Normal 4.29 MB 8 225
16:9
(4320
x2432)Fine 6.78 MB 5 142
Normal 3.57 MB 9 270
10M
(3648
x2736)Fine 6.4 MB 5 151
Normal 3.38 MB 10 286
6M
(2816
x2112)Fine 3.48 MB 10 277
Normal 1.89 MB 18 511
3M
(2048
x1536)Fine 2.0 MB 17 483
Normal 1.25 MB 28 773
VGA
(640
x480)Fine 430 KB 80 2246
Normal 290 KB 118 3330
Downloaded From camera-usermanual.com Casio Manuals 
						

							
168Appendix
Movies
Voice Recording*1
Built-in memory capacity after formatting*2The above values are based on use of a PRO HIGH SPEED SD memory card 
(Panasonic Corporation). The number of images you can save depends on the type of 
memory card you are using.
• Snapshot, movie recording capacity, and voice recording capacity values are  approximate and intended for reference only. Actual capacity depends on image 
contents.
• File size and data rate values are approximate and intended for reference only. Actual  values depend on the type of image being shot.
• When using a memory card with a different capacity, calculate the number of images as a  percentage of 1GB.
• A single movie shoot with the “For YouTube” scene can have a maximum file size of 
2048MB or a recording time of up to 10 minutes.
Image 
Quality 
(Pixels)Maximum  File SizeApproximate  Data Rate 
(Frame Rate)Built-in Memory 
(Approx. 34.9MB*1) 
Movie Recording  CapacitySD Memory Card (1GB*2) Movie 
Recording  CapacityFile Size of  1-minute  Movie
HD
1280x720 Maximum 
Movie Size:  4GB
18.2 Megabits/ second
(20 frames/ second) 13 seconds
7 minutes
14 seconds 136.3 MB
STD
640x480
12.2 Megabits/
second
(30 frames/ second) 21 seconds
10 minutes
47 seconds 91.5 MB
File FormatMaximum 
File SizeFile Size
Built-in Memory 
(Approx. 34.9MB*1) 
Voice Recording  CapacitySD Memory Card (1GB*2) Voice 
Recording  Capacity
WAV
IMA-ADPCM 4 GB 5.5 KB/second 1 hour
49 minutes 49 hours
33 minutes
C
Downloaded From camera-usermanual.com Casio Manuals 
						

							169Appendix
Specifications
File FormatSnapshots:
JPEG (Exif Version 2.3); DCF 2.0 standard; DPOF compliant
Movies:
Motion JPEG AVI, IMA-ADPCM audio (monaural)
Audio (Voice Recording): WAV (monaural)
Recording MediaBuilt-in Memory (Image Storage Area: 34.9MB*)
SD/SDHC
*Built-in memory capacity after formatting
Recorded Image SizesSnapshot:
14M (4320
x3240), 3:2 (4320x2880), 16:9 (4320x2432), 
10M (3648x2736), 6M (2816x2112), 3M (2048x1536), 
VGA (640x480)
Movies:
HD (1280
x720), STD (640x480)
Image Deletion1 file; selected files; all files (with memory protection feature)
Effective Pixels14.10 Megapixels
Imaging ElementSize: 1/2.3-inch square pixel CCD
Total Pixels: 14.48 Megapixels
Lens/Focal DistanceF3.2 (W) to 5.9 (T) f= 4.9 to 19.6 mm 
(equivalent to 27 to 108 mm in 35 mm format)
Six lenses in five groups, including aspherical lens.
Zoom4X optical zoom
4X digital zoom 
HD Zoom
Single SR Zoom
FocusingContrast Detection Auto Focus
• Focus Modes:
Auto Focus, Macro Focus, Super Macro Focus, Infinity, 
Manual Focus
•AF Area:
Intelligent, Spot, Multi, Tracking; with AF assist lamp
Approximate Focus 
(Snapshot)
(From Lens Surface)Auto Focus: 20 cm to 9
 (7.9 to 9
) (Wide Angle)
Macro Focus: 8 cm to 50 cm (3.1 to 19.7) (First step zoom 
from the Widest Angle setting)
Super Macro Focus: 8 cm to 50 cm (3.1 to 19.7)
Infinity: 9
Manual: 20 cm to 9 (7.9 to 9) (Wide Angle)
*Range is affected by optical zoom.
MeteringMulti-pattern (center weighted for some BS scenes) by imaging 
element
Exposure ControlProgram AE
Downloaded From camera-usermanual.com Casio Manuals 
						

							170Appendix
Exposure 
Compensation–2.0 EV to +2.0 EV (in 1/3EV steps)
ShutterCCD shutter, mechanical shutter
Shutter SpeedSnapshot (Auto): 1/2 to 1/2000 second
Snapshot (Night Scene): 4 to 1/2000 second
*May differ due to the camera setup.
Aperture ValueF3.2 (W) to F8.0 (W) (When used with ND filter)
*Using optical zoom changes the aperture value.
White BalanceAuto, Daylight, Overcast, Shade, Day White Fluorescent, 
Daylight Fluorescent, Tungsten, Manual WB
Sensitivity (Standard 
Output Sensitivity, 
Recommended 
Exposure Index)Snapshots:
Auto, ISO 50, ISO 100, ISO 200, ISO 400, ISO 800, 
ISO 1600, ISO 3200 equivalent
Movies: Auto
Self-timerApproximate Trigger Times:
10 seconds, 2 seconds, Triple Self-timer
Flash ModesAuto, Off, On, Soft, Red-eye reduction
Flash Range (ISO 
Sensitivity: Auto)Normal:
0.2 m to 4.4 m (0.7 to 14.4) (Wide Angle)
0.4 m to 2.4 m (1.3 to 7.9) (Telephoto)
Flash CS:
0.3 m to 1.9 m (1.0 to 6.2) (Wide Angle)
0.4 m to 1.1 m (1.3 to 3.6) (Telephoto)
*Range is affected by optical zoom.
Flash Charging TimeApproximately 4 seconds maximum 
RecordingSnapshots (Auto/Premium Auto); Single SR Quality; Macro; 
Self-timer; Continuous Shutter (4fps/10fps/Flash CS); BEST 
SHOT; Make-up; Landscape; Auto Shutter; Face Detection; 
Dynamic Photo; Movies (HD movie, Prerecord Movie, and For 
YouTube) (with monaural audio); Audio (Voice Recording)
Approximate Maximum 
Audio Recording TimesAfter Recording: 30 seconds per image
Voice Recording:
1 hour 49 minutes (when using built-in memory)
Monitor Screen2.7-inch TFT color LCD (Super Clear LCD)
230,400 (960
x240) dots
ViewfinderMonitor Screen
Timekeeping FunctionBuilt-in quartz digital clock
Date and Time: Recorded with image data
Auto Calendar: To 2049
World Time162 cities in 32 time zones
City name, date, time, summer time
Downloaded From camera-usermanual.com Casio Manuals