Casio Exilim Ex H5 Users Guide

							111Printing
.Configuring the Same DPOF Settings for All the Images
Procedure
[p] (PLAY) * Snapshot Screen * [SET] * MENU * PLAY Tab * 
DPOF Printing * All images
1.Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [0] (Movie) so “On” is 
shown for date stamping.
2.Press [SET].
DPOF settings are not cleared automatically after printing is complete.
The next DPOF print operation you execute will be performed using the last DPOF 
settings you configured for the images. To clear DPOF settings, specify “00” for the 
number of copies of all images.
Tell your print service about your DPOF settings!
If you take a memory card to a professional print service, be sure to tell them that it 
includes DPOF settings for the images to be printed and the number of copies. If you 
don’t, the print service may print all the images without regard to your DPOF settings, 
or they may ignore your date stamp setting.
Downloaded From camera-usermanual.com Casio Manuals 
						

							112Printing
.Date Stamping
You can use one of the following three methods to include the recording date in the 
printout of an image.
.Standards Supported by the Camera
• PictBridge
This is a standard of the Camera and Imaging Products Association 
(CIPA).
• PRINT Image Matching III
Using image editing software and printing on a printer that supports 
PRINT Image Matching III makes it possible to use information about 
shooting conditions that is recorded with the image, and produce 
exactly the type of image you want. PRINT Image Matching and 
PRINT Image Matching III are trademarks of Seiko Epson Corporation.
•Exif Print
Printing on a printer that supports Exif Print (Exif 2.2) uses 
information about shooting conditions recorded with the image to 
enhance printed image quality. Contact your printer manufacturer 
for information about models that support Exif Print, printer upgrades, etc.
Configuring camera settings
Configure DPOF settings (page 110).
You can turn date stamping on and off each time you print. You can configure 
settings so some images include the date stamp and some don’t.
Configure the Camera’s Time Stamp setting (page 137).
• The camera’s Time Stamp setting imprints the date into a snapshot when you 
shoot it, so the date is always included when you print. It cannot be deleted.
• Do not turn on DPOF date stamping for an image that includes a date 
stamped with the camera’s Time Stamp function. Doing so can cause the two 
stamps to be overprinted.
Configuring computer settings
You can use commercially available image management software to date 
stamp images.
Professional print service
Request date stamping when ordering prints from a professional print service.
Downloaded From camera-usermanual.com Casio Manuals 
						

							113Using the Camera with a Computer
Using the Camera with a Computer
You can perform the operations described below while the camera is connected to a 
computer.
*Windows only
The procedures you need to perform when using the camera with your computer and 
when using the bundled software are different for Windows and the Macintosh.
Things you can do using a computer...
Save images to a 
computer and 
view them there• Save images and view them manually 
(USB connection) (pages 115, 124).
• Transfer images to a computer 
automatically over a wireless LAN for 
viewing (Eye-Fi) (page 128).
Transfer images 
stored on your 
computer to 
camera memory In addition to images, you also can transfer 
screen shot images from your computer to 
the camera (Photo Transport*) (page 121).
Play back and 
edit movies• You can play back movies (pages 118, 
127).
• To edit movies, use commercially 
available software as required.
Play back and 
edit Dynamic 
Photo images on 
your EXILIM, a 
computer, or on 
a mobile phone• You can copy moving subjects (animated 
characters) from your computer to the 
EXILIM.
• You can convert Dynamic Photo images to 
movies and send them to a mobile phone 
for playback (Requires Dynamic Photo 
Manager.*) (page 123).
• Windows users should refer to “Using the Camera with a Windows Computer” 
on page 114.
• Macintosh users should refer to “Using the Camera with a Macintosh” on page 
124.
Downloaded From camera-usermanual.com Casio Manuals 
						

							114Using the Camera with a Computer
Install the required software in accordance with the version of Windows you are 
running and what you want to do.
*YouTube Uploader for CASIO, Photo Transport, and Dynamic Photo Manager will not 
run under 64-bit versions of Windows OS.
Using the Camera with a Windows Computer
When you want to 
do this:Operating System 
VersionInstall this software:See 
page:
Save images to a 
computer and view 
them there manuallyWindows 7 / Windows 
Vista / Windows XP / 
Windows 2000Installation not required. 115
Play moviesWindows 7 / Windows 
Vista / Windows XP / 
Windows 2000Installation not required.
• Windows Media Player, 
which is already installed 
on most computers, can 
be used for playback.
• If your computer is 
running Windows 2000 
and does not have 
DirectX 9.0c or higher 
installed, download 
DirectX from the 
Microsoft DirectX site 
and install it on your 
computer.118
Edit moviesWindows 7 / Windows 
Vista / Windows XP / 
Windows 2000–
• Use commercial 
software as required.–
Upload movie files to 
YouTubeWindows 7 / Windows 
Vista / Windows XP 
(SP2/SP3) / Windows 
2000 (SP4)YouTube Uploader for 
CASIO*119
Transfer images to 
the cameraWindows 7 / Windows 
Vista / Windows XP / 
Windows 2000Photo Transport 1.0*121
Play back, copy, and 
edit Dynamic Photo 
moving subjects 
(animated characters)Windows 7 / 
Windows Vista (SP1) / 
Windows XP (SP3)Dynamic Photo Manager*123
View the User’s GuideWindows Vista / 
Windows XP 
(SP2/SP3) / Windows 
2000 (SP4)Adobe Reader 8
(Not required if already 
installed.)123
Downloaded From camera-usermanual.com Casio Manuals 
						

							115Using the Camera with a Computer
.Computer System Requirements for Bundled Software
Computer system requirements are different for each of the applications. See the 
“Read me” file that comes with each application for details. Information about 
computer system requirements also can be found under “Computer System 
Requirements for Bundled Software (Bundled CD-ROM)” on page 155 of this manual.
.Precautions for Windows Users
• Except for Adobe Reader, the bundled software requires Administrator privileges to 
run.
• Operation on a self-made computer is not supported.
• Operation may not be possible under certain computer environments.
You can connect the camera to your computer in order to view and store images 
(snapshot and movie files).
NOTE
• You also can use your computer’s card slot (if it has one) or a commercially 
available card reader to access image files directly from the camera’s memory 
card. For details, see the user documentation that comes with your computer.
.To connect the camera to your computer and save files
1.Turn on the camera. Next, press [SET] and then display the REC menu 
(page 65) or the PLAY menu (page 89).
2.On the “Set Up” tab, select “USB” and then press [6].
3.Use [8] and [2] to select “Mass Storage”, and then press [SET].
Viewing and Storing Images on a Computer
Downloaded From camera-usermanual.com Casio Manuals 
						

							116Using the Camera with a Computer
4.Turn off the camera and 
then use the USB cable 
that comes with the 
camera to connect it to 
your computer.
• The camera does not 
draw power over the USB 
cable. Make sure the 
camera’s battery is 
sufficiently charged 
before connecting.
• Make sure that you insert 
the cable connector into 
the USB/AV port until you 
feel it click securely into 
place. Failure to insert 
the connector fully can 
result in poor 
communication or 
malfunction.
• Note that even while the connector is fully inserted, you 
still will be able to see the metal part of the connector as 
shown in the illustration.
• When connecting the USB cable to a USB port, make 
sure you align the connector correctly with the port.
• Your computer may not be able to recognize the camera 
if you connect via a USB hub. Always connect directly to the computer’s USB 
port.
5.Turn on the camera.
6.Windows 7 / Windows Vista users: Click “Start” and then “Computer”.
Windows XP users: Click “Start” and then “My Computer”.
Windows 2000 users: Doubleclick “My Computer”.
7.Double-click “Removable Disk”.
• Your computer recognizes the memory card loaded in the camera (or built-in 
memory if there is no card) as a removable disk.
USB port
USB cable
USB/AV port Large connector
Small connector
Making sure that the 2 mark on the camera is 
aligned with the 8 mark of the USB cable connector, 
connect the cable to the camera.
Downloaded From camera-usermanual.com Casio Manuals 
						

							117Using the Camera with a Computer
8.Right-click the “DCIM” folder.
9.On the shortcut menu that appears, click “Copy”.
10.Windows 7 / Windows Vista users: Click “Start” and then 
“Documents”.
Windows XP users: Click “Start” and then “My Documents”.
Windows 2000 users: Doubleclick “My Documents” to open it.
• If you already have a “DCIM” folder in “Documents” (Windows 7 / Windows 
Vista) or “My Documents” (Windows XP / Windows 2000), the next step will 
overwrite it. If you want to keep the existing “DCIM” folder, you need to change 
its name or move it to a different location before performing the next step.
11.Windows 7 users: On the “Documents” “Organize” menu, select 
“Paste”.
Windows Vista users: On the “Documents” “Edit” menu, select 
“Paste”.
Windows XP / Windows 2000 users: On the “My Documents” “Edit” 
menu, select “Paste”.
This will paste the “DCIM” folder (and all the image files it contains) into your 
“Documents” (Windows 7 / Windows Vista) or “My Documents” (Windows XP / 
Windows 2000) folder. You now have a copy of the files that are in camera 
memory on your computer.
12.After you finish copying images, disconnect the camera from the 
computer.
Windows 7, Windows Vista, Windows XP
On the camera, press [ON/OFF] (Power) to turn off the camera. After making 
sure that the back lamp is unlit, disconnect the camera from the computer.
Windows 2000
Click card services in the task tray on your computer screen, and disable the 
drive number assigned to the camera. Next, after making sure that the back lamp 
is unlit, press the camera’s [ON/OFF] (Power) button to turn off the camera and 
disconnect the camera from your computer.
.To view images you copied to your computer
1.Double-click the copied “DCIM” folder to open it.
2.Double-click the folder that contains the images you want to view.
Downloaded From camera-usermanual.com Casio Manuals 
						

							118Using the Camera with a Computer
3.Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 131.
• An image that was rotated on the camera will be displayed on your computer 
screen in its original (unrotated) orientation.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing 
images. Doing so can cause data to become corrupted.
Windows Media Player, which is already installed on most computers, can be used 
for movie playback. To play back a movie, first copy the movie to your computer and 
then double-click the movie file.
.Minimum Computer System Requirements for Movie Playback
The minimum system requirements described below are necessary to play back 
movies recorded with this camera on a computer.
• The above are recommended system environments. Configuring one of these 
environments does not guarantee proper operation.
• Certain settings and other installed software may interfere with proper playback of 
movies. Never use your computer to modify, delete, move, or rename any image files 
that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which 
will make it impossible to play back images on the camera and can drastically alter 
remaining memory capacity. Whenever you want to modify, delete, move, or 
rename an image, do so only on images that are stored on your computer.
Playing Movies
Operating System : Windows 7 / Windows Vista / Windows XP / Windows 2000
CPU : Image Quality “HD”:
Pentium 4  3.2 GHz or higher
Image Quality “STD” or “LP”:
Pentium M  1.0 GHz or higher
Pentium 4  2.0 GHz or higher
Required Software : Windows Media Player, DirectX 9.0c or higher
Downloaded From camera-usermanual.com Casio Manuals 
						

							119Using the Camera with a Computer
.Movie Playback Precautions
• Be sure to move the movie data to the hard disk of your computer before trying to 
play it. Proper movie playback may not be possible for data accessed over a 
network, from a memory card, etc.
• Proper movie playback may not be possible on some computers. If you experience 
problems, try the following.
– Try recording movies with a quality setting of “STD” or “LP”.
– Try upgrading Windows Media Player to the latest version.
– Quit any other applications you have running, and stop resident applications.
Even if proper playback is not possible on the computer, you can use the AV cable 
that comes bundled with the camera to connect to the video input terminal of a TV or 
computer and play back movies that way.
Installing YouTube Uploader for CASIO from the CD-ROM that comes with your 
camera simplifies uploading of movie files you recorded with the “For YouTube” 
BEST SHOT scene to YouTube.
.What is YouTube?
YouTube is a movie sharing site managed by YouTube, LLC where you can upload 
movies and view movies uploaded by others.
.To install YouTube Uploader for CASIO
1.On the CD-ROM menu screen, select “YouTube Uploader for CASIO”.
2.After reading the information about installation conditions and system 
requirements for installation in the “Read me” file, install YouTube 
Uploader for CASIO.
Uploading Movie Files to YouTube
Downloaded From camera-usermanual.com Casio Manuals 
						

							120Using the Camera with a Computer
.To upload a movie file to YouTube
• Before you can use YouTube Uploader for CASIO, you need to go to the YouTube 
website (http://www.youtube.com/) and register as a user there.
• Do not upload any video that is copyrighted (including neighboring copyrights) 
unless you yourself own the copyright or you have obtained the permission of the 
applicable copyright holder(s).
• The maximum file size for each upload is 1024MB.
1.On the BEST SHOT scene menu, select the “For YouTube” scene (page 
57).
2.Press [0] (Movie) to record the movie.
3.If it isn’t already, connect your computer to the Internet.
4.Connect the camera to your computer (page 115).
5.Turn on the camera.
YouTube Uploader for CASIO will start up automatically.
• If this is the first time you are using the application, configure the YouTube user 
ID and network environment settings, and then click the [OK] button.
6.The left side of the display will have an area for inputting a title, 
category, and other information required for uploading to YouTube. 
Enter the required information.
7.The right side of the display shows a list of movie files in camera 
memory. Select the check box next to the movie file you want to 
upload.
8.When everything is ready, click the [Upload] button.
This will upload the movie file(s) to YouTube.
• After uploading is complete, click the [Exit] button to exit the application.
Downloaded From camera-usermanual.com Casio Manuals