Casio Exilim EX H5 User Manual

171Appendix
.Rechargeable lithium ion battery (NP-80)
.Charger unit (BC-81L)
• Power cord precautions for use in Singapore
The power cord set is not supplied. The power cord used must comply with 
relevant national and/or international standards.
Rated Voltage3.7 V
Rated Capacitance700 mAh
Operating Temperature 
Requirements0 to 40°C (32 to 104°F)
Dimensions31.4 (W) 
x 39.5 (H) x 5.9 (D) mm
(1.24 (W) x 1.56 (H) x 0.23 (D))
WeightApproximately 19 g (0.67 oz)
Input Power100 to 240 V AC, 45 mA, 50/60 Hz...

CASIO COMPUTER CO.,LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
MA1007-B M29
Downloaded From camera-usermanual.com Casio Manuals 

For a wealth of information about Dynamic Photo including 
explanations about how to use Dynamic Photo images, the Dynamic 
Studio image conversion service, sample images, and more, visit the 
special Dynamic Photo website at:
This manual provides an introduction to Dynamic Photo, which creates a whole new 
way to enjoy digital imaging.
• All screen shots shown in this manual are in English. However, the camera allows 
you to select another display language, if you want.
http://dp.exilim.com/
Getting the...

2Dynamic Photo! A totally new way to enjoy digital
photography!
Dynamic Photo! A totally new way to enjoy digital 
photography!
Dynamic Photo makes it easy to crop a moving subject out of a series of images and 
insert it into other images! A simple operation on the camera extracts a moving 
subject automatically by cropping up to 20 Continuous Shutter images. Become the 
star of your digital images! Create the images of your dreams! All on the camera, 
without using a computer! With Dynamic Photo you...

3Using the Dynamic Photo Extracted Sample Subjects
Using the Dynamic Photo Extracted Sample Subjects
Your digital camera comes with a number of extracted sample subjects in its built-in 
memory. You can use these sample subjects to practice creating Dynamic Photo 
images by inserting them into your original snapshots or movies.
1.Remove the memory card from the camera 
(if one is loaded).
You will not be able to access the extracted sample 
subjects in built-in camera memory while a memory 
card is...

4Using the Dynamic Photo Extracted Sample Subjects
6.After creation of the Dynamic Photo image is complete, the finished 
image with the inserted moving subject will appear on the monitor 
screen.
After you master the above procedure using extracted sample subjects, you will 
be ready to create your own extracted subjects and insert them into snapshots or 
movies for totally original Dynamic Photo images.
• You will not be able to access the extracted sample 
subjects in built-in camera memory while a...

5Creating a Dynamic Photo Image
Creating a Dynamic Photo Image
Dynamic Photo images are created by extracting the subject out of one image, and 
inserting it into another image (snapshot or movie). The term “subject” as used here 
refers to what you extract or crop out of the first image. Perform the following steps to 
shoot and extract the subject.
1.Press [r] (REC) to turn on the camera and 
then press [SET].
2.Use [8] and [2] to select the bottom Control 
Panel option (BS) and then press [SET]....

6Creating a Dynamic Photo Image
4.First, shoot the subject.
Best results can be obtained with the camera secured 
on a tripod. With the camera pointed at the moving 
subject, press the shutter button to record. If you 
selected “Moving Subject”, the camera will record a 
series of Continuous Shutter (CS) images over a few 
seconds.
• To help ensure good cropping results...
*See “Four Tips for Good Subject Cropping”
.
• You can select the subject type and the “Number of 
Shots” setting here by pressing...

7Creating a Dynamic Photo Image
The camera compares the images 
you shot in steps 4 and 5 and 
extracts the subject. The extracted 
subject image will appear on the 
monitor screen. If you selected 
“Moving Subject”, the 20 subject images that were recorded will scroll on the screen, 
creating the illusion of movement.
• The background you shoot is not saved. Only the 20 cropped subject images are 
saved.
• You can interrupt an ongoing image extraction process at any time by pressing [ ] 
(Delete).
Use...

8Creating a Dynamic Photo Image
4.Use [4] and [6] to select the subject you want 
to insert and then press [SET].
*Only subjects that can be inserted into other images will 
appear at this time.
5.If you are inserting a subject into a movie an 
image will appear on the monitor screen 
showing the approximate location of the subject 
in the movie. Use [4] and [6] to shift the 
location to the position you want. After you are 
finished, press [SET].
• If you insert a subject into a movie, the resulting...