Casio Exilim EX H20G User Manual
Here you can view all the pages of manual Casio Exilim EX H20G User Manual. The Casio manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 111
![Page 111
111Dynamic Photo
Dynamic Photo
This camera comes with a number of subjects in built-in
memory (“built-in subjects”), which you can insert into
snapshots and movies to create Dynamic Photo images.
• The term “built-in subjects” refers to the moving figures
and characters that came pre-programmed in the
camera’s built-in memory.
Use the following procedure to insert a built-in subject image into a snapshot or
movie.
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Dynamic Photo
1.Use [4] and [6] to select...](http://img.usermanuals.tech/thumb/16/38224/w300_Casio_Exilim_EX-H20G-110.png "Page 111
111Dynamic Photo
Dynamic Photo
This camera comes with a number of subjects in built-in
memory (“built-in subjects”), which you can insert into
snapshots and movies to create Dynamic Photo images.
• The term “built-in subjects” refers to the moving figures
and characters that came pre-programmed in the
camera’s built-in memory.
Use the following procedure to insert a built-in subject image into a snapshot or
movie.
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Dynamic Photo
1.Use [4] and [6] to select...")
111Dynamic Photo Dynamic Photo This camera comes with a number of subjects in built-in memory (“built-in subjects”), which you can insert into snapshots and movies to create Dynamic Photo images. • The term “built-in subjects” refers to the moving figures and characters that came pre-programmed in the camera’s built-in memory. Use the following procedure to insert a built-in subject image into a snapshot or movie. Procedure [p] (PLAY) * [MENU] * PLAY Tab * Dynamic Photo 1.Use [4] and [6] to select...
Page 112
![Page 112
112Dynamic Photo
3.If you are inserting a subject into a movie an
image will appear on the monitor screen
showing the approximate location of the
subject in the movie. Use [4] and [6] to shift
the location to the position you want. After you
are finished, press [SET].
• If you insert a subject into a movie, the resulting movie will be a maximum of
20 seconds long. Everything before and after the insertion is cut off. If the
movie you are inserting into (original movie) is shorter than 20 seconds,...](http://img.usermanuals.tech/thumb/16/38224/w300_Casio_Exilim_EX-H20G-111.png "Page 112
112Dynamic Photo
3.If you are inserting a subject into a movie an
image will appear on the monitor screen
showing the approximate location of the
subject in the movie. Use [4] and [6] to shift
the location to the position you want. After you
are finished, press [SET].
• If you insert a subject into a movie, the resulting movie will be a maximum of
20 seconds long. Everything before and after the insertion is cut off. If the
movie you are inserting into (original movie) is shorter than 20 seconds,...")
112Dynamic Photo 3.If you are inserting a subject into a movie an image will appear on the monitor screen showing the approximate location of the subject in the movie. Use [4] and [6] to shift the location to the position you want. After you are finished, press [SET]. • If you insert a subject into a movie, the resulting movie will be a maximum of 20 seconds long. Everything before and after the insertion is cut off. If the movie you are inserting into (original movie) is shorter than 20 seconds,...
Page 113
![Page 113
113Dynamic Photo
1.Press [p] (PLAY) and then use [4] and [6] to display the Dynamic
Photo you want to view.
2.If you want to see the subject in the Dynamic Photo move, press [SET].
The Dynamic Photo is repeated as a continuous loop.
• Movement of the subject also will start automatically about two seconds after
you display a Dynamic Photo.
A Dynamic Photo with a still image background and a moving subject is stored as a
series of 20 still images. You can use the following procedure to convert the 20...](http://img.usermanuals.tech/thumb/16/38224/w300_Casio_Exilim_EX-H20G-112.png "Page 113
113Dynamic Photo
1.Press [p] (PLAY) and then use [4] and [6] to display the Dynamic
Photo you want to view.
2.If you want to see the subject in the Dynamic Photo move, press [SET].
The Dynamic Photo is repeated as a continuous loop.
• Movement of the subject also will start automatically about two seconds after
you display a Dynamic Photo.
A Dynamic Photo with a still image background and a moving subject is stored as a
series of 20 still images. You can use the following procedure to convert the 20...")
113Dynamic Photo 1.Press [p] (PLAY) and then use [4] and [6] to display the Dynamic Photo you want to view. 2.If you want to see the subject in the Dynamic Photo move, press [SET]. The Dynamic Photo is repeated as a continuous loop. • Movement of the subject also will start automatically about two seconds after you display a Dynamic Photo. A Dynamic Photo with a still image background and a moving subject is stored as a series of 20 still images. You can use the following procedure to convert the 20...
Page 114
114Printing Printing • You can specify which images you want to print, the number of copies, and date stamp settings before printing (page 117). Printing Snapshots Professional Print Service You can take a memory card that contains the images you want to print to a professional print service and have them printed. Printing on a Home Printer Printing Images on a Printer with Memory Card Slot You can use a printer equipped with a memory card slot to print images directly from a memory card. For details,...
Page 115
![Page 115
115Printing
You can connect the camera directly to a printer that supports PictBridge and print
images without going through a computer.
.To set up the camera before connecting to a printer
1.Turn on the camera and press [MENU].
2.On the “Set Up” tab, select “USB” and then press [6].
3.Use [8] and [2] to select “PTP (PictBridge)”, and then press [SET].
.Connecting the Camera to a Printer
Use the USB cable that
comes bundled with the
camera to connect the
camera to your printer’s
USB port.
• The...](http://img.usermanuals.tech/thumb/16/38224/w300_Casio_Exilim_EX-H20G-114.png "Page 115
115Printing
You can connect the camera directly to a printer that supports PictBridge and print
images without going through a computer.
.To set up the camera before connecting to a printer
1.Turn on the camera and press [MENU].
2.On the “Set Up” tab, select “USB” and then press [6].
3.Use [8] and [2] to select “PTP (PictBridge)”, and then press [SET].
.Connecting the Camera to a Printer
Use the USB cable that
comes bundled with the
camera to connect the
camera to your printer’s
USB port.
• The...")
115Printing You can connect the camera directly to a printer that supports PictBridge and print images without going through a computer. .To set up the camera before connecting to a printer 1.Turn on the camera and press [MENU]. 2.On the “Set Up” tab, select “USB” and then press [6]. 3.Use [8] and [2] to select “PTP (PictBridge)”, and then press [SET]. .Connecting the Camera to a Printer Use the USB cable that comes bundled with the camera to connect the camera to your printer’s USB port. • The...
Page 116
![Page 116
116Printing
.To print
1.Turn on the printer and load paper.
2.Turn on the camera.
This will display the print menu screen.
3.Use [8] and [2] to select “Paper Size”, and then
press [6].
4.Use [8] and [2] to select a paper size and then
press [SET].
• The following are the available paper sizes.
3.5x5, 5x7, 4x6, A4, 8.5x11, By Printer
• Selecting “By Printer” prints using a paper size selected on the printer.
• See the documentation that comes with your printer for information about
paper settings....](http://img.usermanuals.tech/thumb/16/38224/w300_Casio_Exilim_EX-H20G-115.png "Page 116
116Printing
.To print
1.Turn on the printer and load paper.
2.Turn on the camera.
This will display the print menu screen.
3.Use [8] and [2] to select “Paper Size”, and then
press [6].
4.Use [8] and [2] to select a paper size and then
press [SET].
• The following are the available paper sizes.
3.5x5, 5x7, 4x6, A4, 8.5x11, By Printer
• Selecting “By Printer” prints using a paper size selected on the printer.
• See the documentation that comes with your printer for information about
paper settings....")
116Printing .To print 1.Turn on the printer and load paper. 2.Turn on the camera. This will display the print menu screen. 3.Use [8] and [2] to select “Paper Size”, and then press [6]. 4.Use [8] and [2] to select a paper size and then press [SET]. • The following are the available paper sizes. 3.5x5, 5x7, 4x6, A4, 8.5x11, By Printer • Selecting “By Printer” prints using a paper size selected on the printer. • See the documentation that comes with your printer for information about paper settings....
Page 117
117Printing .Digital Print Order Format (DPOF) DPOF is a standard that allows you to include image type, number of copy, and time stamp on/off information on the memory card with the images. After configuring settings, you can use the memory card to print on a home printer that supports DPOF or take the memory card to a professional print service. • Whether or not you will be able to use DPOF settings for printing depends on the printer you are using. • Some professional print services may not...
Page 118
![Page 118
118Printing
.Configuring the Same DPOF Settings for All the Images
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab *
DPOF Printing * All images
1.Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [BS] so “On” is shown for
date stamping.
2.Press [SET].
DPOF settings are not cleared automatically after printing is complete.
The next DPOF print operation you...](http://img.usermanuals.tech/thumb/16/38224/w300_Casio_Exilim_EX-H20G-117.png "Page 118
118Printing
.Configuring the Same DPOF Settings for All the Images
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab *
DPOF Printing * All images
1.Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [BS] so “On” is shown for
date stamping.
2.Press [SET].
DPOF settings are not cleared automatically after printing is complete.
The next DPOF print operation you...")
118Printing .Configuring the Same DPOF Settings for All the Images Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * DPOF Printing * All images 1.Use [8] and [2] to specify the number of copies. You can specify a value up to 99. Specify 00 if you do not want to print the image. • If you want to include the date in the images, press [BS] so “On” is shown for date stamping. 2.Press [SET]. DPOF settings are not cleared automatically after printing is complete. The next DPOF print operation you...
Page 119
119Printing .Date Stamping You can use one of the following three methods to include the recording date in the printout of an image. .Standards Supported by the Camera • PictBridge This is a standard of the Camera and Imaging Products Association (CIPA). • PRINT Image Matching III Using image editing software and printing on a printer that supports PRINT Image Matching III makes it possible to use information about shooting conditions that is recorded with the image, and produce exactly the type of...
Page 120
120Using the Camera with a Computer Using the Camera with a Computer You can perform the operations described below while the camera is connected to a computer. *Windows only The procedures you need to perform when using the camera with your computer and when using the bundled software are different for Windows and the Macintosh. Things you can do using a computer... Save images to a computer and view them there• Save images and view them manually (USB connection) (pages 122, 131). • Transfer images...