Casio Exilim Ex G1 Users Guide

71Advanced Settings
.Specifying the Method for Saving Continuous Shutter Images
Specify the method to use for saving images recorded with “High Speed CS”.
1.After continuous shutter shooting is finished, use [8] and [2] to 
select the save method you want and then press [SET].
• Does not save any of the images while “Cancel Save” is selected.
Save Selected
The shot images are played back at slow speed so you can select the images 
you want to save.
1While the shot images are playing back and an image...

72Advanced Settings
IMPORTANT!
• If there is not enough available capacity on the memory card, you may not be able 
to record the number of CS images indicated on the monitor screen. Make sure 
your memory card has sufficient remaining capacity before shooting with using 
continuous shutter.
• With continuous shutter, exposure and focus for the first image are applied for 
successive images as well.
• When using a continuous shutter mode, keep the camera still until shooting is 
finished.
• Continuous...

73Advanced Settings
Procedure
REC mode * [MENU] * REC Tab * REC Light
For details, see the Control Panel procedure on page 46.
Procedure
REC mode * [MENU] * REC Tab * Movie Audio
Selecting “On” enables audio recording (monaural) during movie recording. Selecting 
“Off” disables audio recording.
• In a shooting environment where there is too much noise due to vibration, select 
“Off” for movie audio recording.
Procedure
REC mode * [MENU] * REC Tab * Auto Shutter
With Auto Shutter, the camera releases the...

74Advanced Settings
.To use Detect Blur to minimize image blur (Detect Blur)
1.Point the camera at the subject and half-press the shutter button. Wait 
until the camera adjusts exposure and focus automatically.
2.Press the shutter button the rest of the way 
down.
The camera will go into a standby mode and start 
detecting hand and subject movement. The camera 
will release the shutter automatically the moment it 
determines there is no image blur.
•“0 Auto” flashes on the monitor screen while 
detection...

75Advanced Settings
.To use Detect Smile to record when a subject is smiling 
(Detect Smile)
1.Point the camera at the subject and half-press the shutter button. Wait 
until the camera adjusts exposure and focus automatically.
2.Press the shutter button the rest of the way 
down.
The camera will go into a standby mode and start 
detecting whether the subject is smiling. The camera 
will release the shutter automatically the moment it 
determines the subject is smiling.
•“0 Auto” flashes on the monitor...

76Advanced Settings
Tips for Better Auto Shutter Snapshots
• Using Auto Shutter in combination with Anti Shake (page 77) reduces the chance 
of image blur even more.
• While recording with Detect Blur or Detect Smile, keep the camera as still as 
possible until the recording operation is complete.
IMPORTANT!
• If the camera remains in Auto Shutter standby without releasing the shutter, you 
can record an image by pressing the shutter button all the way down again.
• Detect Blur and Detect Panning may not...

77Advanced Settings
Procedure
REC mode * [MENU] * REC Tab * Face Detection
For details, see the Control Panel procedure on page 46.
Procedure
REC mode * [MENU] * REC Tab * Anti Shake
You can turn on the camera’s Anti Shake feature to reduce image blur due to subject 
movement when shooting a moving subject using telephoto, when shooting a fast-
moving subject, or when shooting under dim lighting conditions.
NOTE
• ISO sensitivity, aperture, and shutter speed do not appear on the monitor screen 
when you...

78Advanced Settings
Procedure
REC mode * [MENU] * REC Tab * AF Assist Light
Half-pressing the shutter button while this setting is selected 
causes the front lamp to light, which provides illumination for 
focusing in areas where lighting is dim. Leaving this function 
turned off is recommended when shoot portraits from short 
distances, etc.
IMPORTANT!
• Never look directly into the front lamp while it is lit.
Procedure
REC mode * [MENU] * REC Tab * Focus Frame
You can use this procedure to select from...

79Advanced Settings
Procedure
REC mode * [MENU] * REC Tab * Digital Zoom
You can use this setting to turn digital zoom on or off. When digital zoom is turned off, 
operating the zoom button zooms the image with optical zoom only.
Procedure
REC mode * [MENU] * REC Tab * Quick Shutter
When Quick Shutter is turned on, you can press the shutter button all the way without 
waiting for Auto Focus. This will record the image using a high-speed focus operation 
that is much faster than Auto Focus.
NOTE
• Quick...

80Advanced Settings
Procedure
REC mode * [MENU] * REC Tab * Grid
The on-screen grid can be displayed on the REC mode 
monitor screen for easy vertical and horizontal alignment 
when composing images.
Procedure
REC mode * [MENU] * REC Tab * Review
While Review is turned on, the camera will display a image for about one second 
immediately after you press the shutter button to record it.
Procedure
REC mode * [MENU] * REC Tab * Icon Help
While Icon Help is turned on, a textual description will appear on the...