Casio Exilim Ex G1 Users Guide

141Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * File No.
Use the following procedure to specify the rule that governs generation of the serial 
number used in file names (page 136).
Procedure
[MENU] * Set Up Tab * World Time
You can use the World Time screen to view the current time in a zone that is different 
from your Home City when you go on a trip, etc. World Time displays the current time 
in 162 cities in 32 time zones around the globe.
1.Use [8] and [2] to select “World” and then press...

142Other Settings (Set Up)
3.Use [8], [2], [4], and [6] to select the geographic area you want and 
then press [SET].
4.Use [8] and [2] to select the city you want and then press [SET].
5.Press [SET].
IMPORTANT!
• Before configuring World Time settings, make sure that the Home City setting is 
the place where you live or normally use the camera. If it isn’t, select “Home” on the 
screen in step 1 and configure the Home City, date, and time settings as required 
(page 143).
Procedure
[MENU] * Set Up Tab *...

143Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Adjust
When the date and time settings are what you want, press [SET] to apply them.
• You can specify a date from 2001 to 2049.
• Be sure to select your Home City (page 141) before setting the time and date. If 
you set the time and date while the wrong city is selected for your Home City, the 
times and dates of all of the World Time cities (page 141) will be wrong.
Procedure
[MENU] * Set Up Tab * Date Style
You can select from among three...

144Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Language
Procedure
[MENU] * Set Up Tab * Sleep
This feature turns off the monitor screen whenever no camera operation is performed 
for a preset amount of time. Press any button to turn the monitor screen back on.
Trigger Time Settings: 30 sec, 1 min, 2 min, Off (Sleep is disabled while “Off” is 
selected.)
• Sleep is disabled under any of the following conditions.
– In the PLAY mode
– While the camera is connected to a computer or other device
–...

145Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Auto Power Off
Auto Power Off turns off the camera whenever no camera operation is performed for 
a preset amount of time.
Trigger Time Settings: 1 min, 2 min, 5 min (The trigger time is always 5 minutes in the 
PLAY mode.)
• Auto Power Off is disabled under any of the following conditions.
– While the camera is connected to a computer or other device
– During a slideshow
– During “Ë Tracking”
– During interval snapshot or interval movie...

146Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * USB
You can use the procedure below to select the USB communication protocol, which is 
used when exchanging data with a computer, printer, or other external device.
Procedure
[MENU] * Set Up Tab * Video Out
You can use the procedure in this section to select either NTSC or PAL as the video 
output system. You can also specify an aspect ratio of 4:3 or 16:9.
• Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use....

147Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Format
If a memory card is loaded in the camera, this operation will format the memory card. 
It will format built-in memory if no memory card is loaded.
• The format operation will delete all contents on the memory card or in built-in 
memory. It cannot be undone. Make sure you do not need any data currently on 
the card or in built-in memory before you format it.
• Formatting built-in memory will delete the following data.
– Protected images
–...

148Configuring Monitor Screen Settings
Configuring Monitor Screen Settings
You can turn display information on and off by pressing [8] (DISP). You can 
configure separate settings for the REC mode and PLAY mode.
Displays a histogram on the monitor screen which you can use to 
check the exposure of an image before you shoot it. You also can 
display the histogram in the PLAY mode for information about the 
exposure levels of images.
A histogram is a graph that represents the lightness of an image in terms...

149Configuring Monitor Screen Settings
Example Histograms
NOTE
• A centered histogram does not necessarily guarantee optimum exposure. The 
recorded image may be over-exposed or under-exposed, even though its 
histogram is centered.
• Due to the limitations of exposure compensation, you may not be able to achieve 
an optimum histogram configuration.
• Use of the flash and certain shooting conditions can cause the histogram to 
indicate exposure that is different from the actual exposure of the image when...

150Appendix
Appendix
.Avoid Use While In Motion
• Never use the camera to record or play back images while operating an automobile 
or other vehicle, or while walking. Looking at the monitor while in motion creates 
the risk of serious accident.
.Directly Viewing the Sun or Bright Light
• Never look at the sun or any other bright light through the cameras viewfinder. 
Doing so can damage your eyesight.
.Flash
• Never use the flash unit in areas where flammable or explosive gas may be 
present. Such...