Home > Casio > Digital Camera > Casio Exilim EX G1 User Manual

Casio Exilim EX G1 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Casio Exilim EX G1 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 338 Casio manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							31Quick Start Basics
    This camera is designed to be shock resistant, waterproof, and dustproof as 
    described below.
    0Shock resistant:
    This camera has passed drop testing from a height of 2.13 meters/7 feet* onto a 
    plywood (lauan material)*
    1.*Based on CASIO test equivalent to MIL-Standard 810F Method 516.5-Shock. 
    (6 faces, 8 corners, 12 edges: Total of 26 drops.)
    0Waterproof: 
    Corresponds to IEC/JIS Protection Class 8 (IPX8)*2 and Protection Class 6 (IPX6) 
    equivalent waterproofing that allows immersion up to 3.0 meters for 60 minutes and 
    protection against jet spray from all directions.*
    3
    0Dustproof: 
    Corresponds to IEC/JIS Protection Class 6 (IP6X) dustproofing.
    *1Though the camera is designed to withstand the effects of impact occurring during 
    normal daily use, very strong impact due to very rough handling such as throwing the 
    camera or dropping it from excessive heights can result in serious damage. Even if a 
    drop does not result in functional problems, it can cause scratching and other cosmetic 
    damage to the camera.
    *2Signifies underwater use when immersed for a duration and at a pressure specified by 
    CASIO.
    *3Test conditions defined by CASIO. Does not include cases where battery life is 
    shortened due to use conditions. 
    IMPORTANT!
    • The shock resistance, waterproofing, and dustproofing of this product are based on 
    CASIO test results, and do not constitute any guarantee that the product will 
    perform, will not be damaged, or will not malfunction under such conditions.
    .Precautions before Underwater Use
    This camera can be used to shoot images underwater up to a depth of 3.0 meters. 
    However, the following precautions should be kept in mind before using the camera 
    underwater.
    • Check the contact surfaces of the battery cover and memory card/terminal cover 
    gaskets for dirt, sand, and any other foreign matter. Clean contact surfaces by 
    wiping them with a soft, clean, dry cloth. Note that a single strand of hair or a single 
    grain of sand can allow water to leak into the camera.
    • Check the battery cover and memory card/terminal cover waterproofing gaskets 
    are free of cracks, scratches, and other damage.
    • Close the battery cover and memory card/terminal cover completely, until they click 
    securely into place.
    • Never open or close the battery cover or memory card/terminal cover while near 
    water or in an area exposed to sea breezes. Also avoid opening or closing the 
    covers while your hands are wet.
    Shock resistant, Waterproof, Dustproof
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							32Quick Start Basics
    • This camera will sink if dropped underwater. Use the strap or some other means to 
    avoid dropping.
    • The waterproofing of this camera protects it against salt water and fresh water only. 
    Protection is not provided against hot spring water.
    • Never leave the camera for long periods in a location subjected to very low 
    temperatures or very high temperatures in excess of 40
    °C. In particular, avoid 
    leaving the camera in areas exposed to strong direct sunlight, in a motor vehicle on 
    a hot day, etc. Any of these conditions can result in a deterioration of 
    waterproofing.
    .Precautions during Underwater Use
    • The camera is designed for use at depths no greater than 3.0 meters and at water 
    temperatures within the range of 0°C to 40°C.
    • Do not leave the camera submerged for longer than 60 minutes.
    • When repeatedly immersing the camera for underwater user, allow at least 
    15 minutes to elapse between immersions.
    • Never open the battery cover or memory card/terminal cover while the camera is 
    submerged.
    • Do not dive into water while holding the camera. Also, do not use the camera in 
    rapids, under a waterfall, or in any other rough water condition. Exposing the 
    camera to strong water pressure can cause leaking and malfunction.
    • Take care that you do not drop the camera into water or allow it to strike the 
    surface of the water. Doing so can cause leaking.
    .Precautions after Underwater Use
    • Before opening the battery cover or memory card/terminal cover, use a clean, dry, 
    soft cloth to wipe the camera free of all moisture and dirt.
    • If you open the battery cover or the memory card/terminal cover while the camera 
    is wet, be sure to wipe its inside surfaces free of all moisture before closing it.
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							33Quick Start Basics
    .Cleaning Your Camera after Use
    Perform the following steps to clean the camera after using it under water or after it 
    becomes soiled with sand, dirt, or mud. Note that the battery cover and memory card/
    terminal cover must be closed securely when performing these steps.
    1.Immerse the camera in fresh water.
    • Fill a bucket or other container with tap water or other fresh 
    water, and immerse the camera for about 10 minutes. 
    Gently wipe dust, dirt, sand, and other matter from the 
    camera with your fingers.
    • Do not rub the lens surface, monitor screen, or flash 
    window while dirty.
    2.Wipe the camera dry.
    • Use a clean, dry, soft cloth to wipe off the camera, and leave it in a shady place 
    to dry.
    IMPORTANT!
    • The temperature of the water used to wash the camera should be no greater than 
    30°C. Never use detergent, hot water, or strongly running water to clean the 
    camera. Doing so creates the risk of leaking and malfunction.
    • Never swing the camera around to remove water, and never use a dryer or other 
    intense heat to dry it.
    • Never place the camera in a washing machine to wash it.
    .Precautions after Use
    • Do not leave the camera in an area exposed to extreme heat (40°C or greater) or 
    cold (–10°C or lower). Doing so can cause loss of waterproofing.
    • Never use chemical agents for the purpose of cleaning, rust proofing, moisture 
    proofing, etc. Doing so can cause loss of waterproofing.
    • Use fresh water to clean the camera within 60 minutes after using it underwater. 
    Failure to do so can cause deterioration of the exterior finish and waterproofing 
    properties.
    • In order to maintain waterproofing, replacement of the camera’s gaskets is 
    recommended once each year. Note that you will be charged for gasket 
    replacement. Contact a CASIO authorized service center or your original retailer 
    for gasket replacement.
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							34Quick Start Basics
    .Other Precautions
    • The accessories that come with the camera (battery, etc.) are not waterproof.
    • Subjecting the camera to extreme impact can cause loss of waterproofing.
    • Moisture on the camera can freeze in very cold environments. Ice left on the 
    camera can lead to malfunction. Do not allow moisture to remain on the camera 
    under cold conditions.
    • Should water ever leak into the camera and cause malfunction due to improper 
    use, CASIO COMPUTER CO., LTD. will not be held liable for any damage to 
    internal components (battery, recording media, etc.), loss of recorded data, or any 
    expenses incurred to shoot lost images.
    • CASIO COMPUTER CO., LTD. shall not be held liable for any accident that may 
    occur while the camera is being used underwater.
    • CASIO COMPUTER CO., LTD. shall not be held liable for any damages or for any 
    accident (personal injury, etc.) that occurs while using the camera underwater.
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							35Snapshot Tutorial
    Snapshot Tutorial
    The Control Panel can be used to configure camera settings.
    1.In the REC mode, press [SET].
    This will select one of the Control Panel icons and display its settings.
    2.Use [8] and [2] to select the setting you want to change.
    *Snapshot image quality cannot be changed using the Control Panel.
    3.Use [4] and [6] to change the setting.
    4.If you want to configure another setting, repeat steps 2 and 3.
    5.After all of the settings are the way you want, press [SET].
    This will apply the settings and return to the REC mode.
    NOTE
    • You also can configure settings other than those listed above (page 65).
    • The Control Panel cannot be displayed while a Dynamic Photo, Prerecord Movie, 
    For YouTube, or Voice Recording Operation is in progress.
    Using the Control Panel
    [SET]Control Panel
    Available settings
    [8] [2] [4] [6]
    1
    9 5 3
    4
    7
    8 2
    6
    1Snapshot image size/quality* 
    (pages 36, 82)
    2Movie image quality (page 39)
    3Flash (page 40)
    4Self-timer (page 42)
    5AF Area (page 43)
    6ISO sensitivity (page 45)
    7REC Light (page 46)
    8Face Detection/Make-up/Landscape 
    (pages 46, 48, 49)
    9Date/Time (page 50)
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							36Snapshot Tutorial
    You can use the following procedure to specify the eight items you want on the 
    Control Panel.
    1.While the Control Panel is displayed, press 
    [MENU].
    • This will display a menu of Control Panel items, with 
    the items currently selected for display shown in 
    green.
    2.Use [8], [2], [4], and [6] to select an item you 
    want on the Control Panel and then press [SET].
    This will cause the lamp next to the item to light.
    3.Repeat the above step to select eight items for the Control Panel.
    After you select the eighth item, the camera switches to the REC mode and 
    displays the Control Panel.
    • To exit the item select operation, press [MENU].
    NOTE
    • The “Date/Time” item at the bottom of the Control Panel is fixed and cannot be 
    changed.
    • The screen shots in this manual show the initial default Control Panel items.
    • To return the Control Panel items to their initial defaults, reset the camera (page 
    147).
    .Pixels
    A digital camera image is a collection of small 
    dots called “pixels”. The more pixels there are 
    in an image, the more detail there will be. 
    However, you generally can do with fewer 
    pixels when printing an image (L size) through 
    a print service, attaching an image to e-mail, 
    when viewing the image on a computer, etc.
    Specifying Control Panel Items
    Changing the Image Size (Size)
    Pixel
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							37Snapshot Tutorial
    .About image sizes
    The size of an image indicates how many pixels it contains, and is expressed as 
    horizontal pixelsxvertical pixels.
    Image Size Selection Tips
    Note that larger images have more pixels, so they take up more memory space.
    • For information about image size, image quality, and number of images that can be 
    stored, see page 173.
    • For information about movie image size, see page 39.
    • For information about resizing existing snapshots, see page 106. 8M (3264
    x2448) size image = 
    Approximately 8 million pixels
    *Unit: pixels
    VGA (640x480) size image = 
    Approximately 300,000 pixels
    Large Number 
    of PixelsMore detail, but takes up more memory. Best 
    when you plan to print large-size prints (such 
    as A3 size).
    Small Number 
    of PixelsLess detail, but takes up less memory. Best 
    when you want to send images by e-mail, 
    etc.
    3264*
    2448*
    640*
    480*
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							38Snapshot Tutorial
    .To select the snapshot image size
    1.In the REC mode, press [SET].
    2.Use [8] and [2] to select the top Control Panel option (Snapshot 
    Image Size).
    3.Use [4] and [6] to select an image size and then press [SET].
    • The initial factory default image size setting is “12M”.
    • Selecting “3:2” records images with an aspect ratio of 3:2, which matches the 
    standard aspect ratio of print paper.
    • The letters “HDTV” stand for “High Definition Television”. An HDTV screen has an 
    aspect ratio of 16:9, which makes them wider than the usual 4:3 aspect ratio of 
    television screens of the past. Your camera can record images that are compatible 
    with the aspect ratio an HDTV screen.
    • You should regard the print paper sizes suggested here as guidelines only (200 dpi 
    print resolution).
    Image Size 
    (Pixels)Suggested 
    Print Size and 
    ApplicationDescription
    12M 
    (4000
    x3000)Poster Print
    Good detail for better clarity even for images 
    cropped (page 106) from the original 3:2 
    (4000
    x2656)Poster Print
    16:9 
    (4000
    x2240)HDTV
    8M 
    (3264
    x2448)A3 Print
    Good detail
    5M 
    (2560
    x1920)A4 Print
    3M 
    (2048
    x1536)3.5x5 PrintBest when preserving memory capacity is 
    relatively more important than image quality.
    VGA 
    (640
    x480)E MailImage files are smaller, which is better when 
    attaching images to e-mail. However, images are 
    relatively coarser.
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							39Snapshot Tutorial
    .Specifying Movie Image Quality
    Movie image quality is a standard that determines the detail, smoothness, and clarity 
    of a movie during playback. Shooting with the high-quality (WIDE) setting will result in 
    better image quality, but it also shortens the amount of time you can shoot.
    1.In the REC mode, press [SET].
    2.Use [8] and [2] to select the second Control Panel option from the top 
    (Movie Image Quality).
    3.Use [4] and [6] to select the setting you want and then press [SET].
    • The 16:9 aspect ratio is available only when “WIDE” is selected as the image 
    quality.
    • Memory capacity (Movie recording time you can shoot) will be affected by the 
    quality settings you configure (page 174).
    Image Quality (Pixels)Approximate Data RateFrame Rate
    WIDE 848
    x480 13 Megabits/second 30 frames/second
    STD 640
    x480 10 Megabits/second 30 frames/second
    LP 320
    x240 2.7 Megabits/second 15 frames/second
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    							40Snapshot Tutorial
    1.In the REC mode, press [2] ( ) once.
    2.Use [4] and [6] to select the flash 
    setting you want and then press [SET].
    3.Press the shutter button to shoot.
    • For information about Flash Range, see page 176.
    Using Flash (Flash)
     Auto FlashFlash fires automatically in accordance with exposure 
    (amount of light and brightness) conditions.
     Flash OffFlash does not fire.
     Flash OnFlash always fires. This setting can be used to brighten a 
    subject that normally comes out dark due to daylight or 
    backlight (daylight synchro flash).
     Soft FlashSoft flash always fires, regardless of exposure conditions
     Red Eye 
    ReductionFlash fires automatically. This type of flash can be used to 
    reduce the chance of redness in the subject’s eyes.
    Back lamp
    Flashes orange while the flash is charging to indicate 
    that image recording is disabled.
    • You will not be able to take another flash snapshot 
    until the lamp stops flashing orange, which indicates 
    that charging is complete.
    < indicates the flash will fire.
    Flash
    [2] ( )
    >
    ?
    <
    _
    ¥
    Downloaded From camera-usermanual.com Casio Manuals 
    						
    All Casio manuals Comments (0)

    Related Manuals for Casio Exilim EX G1 User Manual