Casio Exilim Ex Fh20 Users Guide

81Advanced Settings
Tips for Best Face Detection Results
• The camera performs center focus if it cannot detect a face.
• Always make sure that Auto Focus (AF) is selected as the focus mode when 
shooting with face detection.
• Detection of the following types of faces is not supported.
– A face that is obstructed by hair, sunglasses, a hat, etc., or a face in dark shade
– A profile or a face that is at an angle
– A face that is very far away and small, or very close and large
– A face in an area that is...

82Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * AE/AF Lock
See page 49 for details.
Procedure
[r] (REC) * [MENU] * REC Tab * Save CS Images
See page 53 for details.
Procedure
[r] (REC) * [MENU] * REC Tab * Digital Zoom
Select “On” when you want to use digital zoom (page 44).
• Digital zoom is disabled while shooting with the following features.
– Some BEST SHOT scenes (High Speed Anti Shake, Digital Panning)
– High-speed movie recording
–“Á Super Macro” selected for the focus mode
– “RAW+”...

83Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Quick Shutter
When Quick Shutter is turned on, you can press the shutter button all the way without 
waiting for Auto Focus. This will record the image using a high-speed focus operation 
that is much faster than Auto Focus.
NOTE
• Quick Shutter is disabled when the zoom factor is greater. Recording is performed 
using Auto Focus at this time.
Procedure
[r] (REC) * [MENU] * REC Tab * Review
While Review is turned on, the camera will display a...

84Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Icon Help
While Icon Help is turned on, a textual description will appear on the display for 
certain icons when you switch between REC functions.
Function Supported by Icon Help
• REC Mode
Procedure
[r] (REC) * [MENU] * REC Tab * Memory
When you turn off the camera, it remembers the current settings of all enabled 
memory items and restores them when you turn it back on. Any memory item that is 
disabled will be returned to its initial default...

85Advanced Settings
Procedure
[r] (REC) * [MENU] * Quality Tab * T Quality (Snapshot)
• The “Fine” setting helps to bring out details when shooting a finely detailed image 
that includes dense tree branches or leaves, or an image of a complex pattern.
• Memory capacity (the number of images you can record) will be affected by the 
quality settings you configure (page 168).
Procedure
[r] (REC) * [MENU] * Quality Tab * Dynamic Range
You can adjust the Dynamic Range setting in order to capture the bright...

86Advanced Settings
Procedure
[r] (REC) * [MENU] * Quality Tab * Flash Intensity
You can specify flash intensity to one of 13 levels from +2 (brightest flash) to –2 (least 
bright flash).
• Flash intensity may not change when the subject is too far away or too close.
Procedure
[r] (REC) * [MENU] * Quality Tab * Flash Assist
The subject in an image will look 
too dark if flash intensity is not 
enough to reach a subject that is 
too far away. When this happens, 
you can use flash assist to 
supplement the...

87Advanced Settings
Procedure
[r] (REC) * [MENU] * Quality Tab * Sharpness
You can specify one of five sharpness settings from +2 (sharpest) to –2 (least sharp).
Procedure
[r] (REC) * [MENU] * Quality Tab * Saturation
You can specify one of five saturation settings from +2 (most saturated) to –2 (least 
saturated).
Procedure
[r] (REC) * [MENU] * Quality Tab * Contrast
You can specify one of five contrast settings from +2 (most contrast between light and 
dark) to –2 (least contrast between light and...

88Viewing Snapshots and Movies
Viewing Snapshots and Movies
See page 24 for the procedure for viewing snapshots.
1.Press [p] (PLAY) and then use [4] and [6] to display the movie you 
want to view.
2.Press [SET] to start playback.
Movie Playback Controls
• Playback may not be possible for movies not recorded with this camera.
Viewing Snapshots
Viewing a Movie
[4] [6]During playback, changes the playback direction and playback speed.
While playback is paused, scrolls forward or back.
• Playback speed...

89Viewing Snapshots and Movies
Each time you perform a continuous shutter (CS) 
operation, the camera creates a CS group that 
includes all of the images for that particular CS 
session. You can use the following procedure to play 
back the images in a particular CS group.
1.Press [p] (PLAY) and then use [4] and [6] 
to display the CS group whose images you 
want to view.
2.Press [SET] to start playback the images in 
the CS group.
This will play back the images in the CS group you 
selected.
Playback...

90Viewing Snapshots and Movies
You can use the following procedures to delete images while playback is in progress 
or paused.
.Deleting a Specific CS Group File
1.While CS image playback is in progress or paused, press [2].
2.Use [4] and [6] to display the image you want to delete.
3.Use [8] and [2] to select “Delete” and then press [SET].
• To delete other files, repeat steps 2 and 3.
• To exit the delete operation, press [MENU].
.Deleting All Files in a CS Group
1.While CS image playback is in...