Casio EX S6 User Manual

							71Viewing Snapshots and Movies
Viewing Snapshots and Movies
See page 28 for the procedure for viewing snapshots.
1.Press [p] (PLAY) and then use [4] and [6] to display the movie you 
want to view.
2.Press [SET] to start 
playback.
Movie Playback Controls
• Playback may not be possible for movies not recorded with this camera.
Viewing Snapshots
Viewing a Movie
Fast forward/
fast reverse[4] [6]
• Each press of either button increases the speed of the fast 
forward or fast reverse operation.
• To return to normal playback speed, press [SET].
Play/pause[SET] 
1 frame 
forward/back[4] [6]
• Holding down either button scrolls continuously.
Volume 
adjustmentPress [2] and then press [8] [2]
• Volume can be adjusted only while movie playback is in 
progress.
Information 
display on/off[8] (DISP) 
ZoomSlide the zoom controller in the direction of z ([).
• You can use [8], [2], [4], and [6] to scroll the zoomed image 
on the monitor screen. You can zoom a movie image up to 4.5 
times normal size.
Stop playback[MENU] 
Movie icon: »
Image quality Recording time 
						

							72Viewing Snapshots and Movies
1.In the PLAY mode, use [4] and [6] to scroll through the images until 
the one you want is displayed.
2.Slide the zoom controller towards z ([) to 
zoom.
You can use [8], [2], [4], and [6] to scroll the 
zoomed image on the monitor screen. Slide the 
zoom controller towards w to unzoom the image.
– If display indicators are turned on, an indicator 
in the lower right corner of the monitor screen 
shows what part of the zoomed image is 
currently displayed.
– To exit the zoom screen, press [MENU] or 
[BS].
– Though the maximum image zoom factor is 
8X, certain image sizes may not allow zooming 
up to the full 8X.
1.In the PLAY mode, slide the zoom controller 
towards w (]).
Use [4] and [6] to scroll, 12 images at a time.
To view a particular image, use [8], [2], [4], or [6] 
to move the selection boundary to the image you 
want and then press [SET].
Zooming an On-screen Image
Displaying 12 Images on the Same Screen
Image area
Current display area
Zoom factor
Boundary 
						

							73Viewing Snapshots and Movies
1.Use the AV cable that comes with the camera to connect it to the TV.
• Make sure that you insert the cable connector into the 
USB/AV port until you feel it click securely into place. 
Failure to insert the connector fully can result in poor 
communication or malfunction.
• Note that even while the connector is fully inserted, 
you still will be able to see the metal part of the 
connector as shown in the illustration.
2.Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is 
connected.
3.Press [p] (PLAY) to turn on the camera.
This will cause an image to appear on the TV screen, without anything appearing 
on the camera’s monitor screen.
• Pressing [ON/OFF] or [r] (REC) will not turn on the camera while the AV 
cable is connected.
• You also can change the aspect ratio of the screen and the video output 
system (page 116).
Viewing Snapshots and Movies on a TV Screen 
TV
YellowAV cable (bundled)
USB/AV port White
Making sure that the 2 mark on the camera is
aligned with the 8 mark of the AV cable
connector, connect the cable to the camera.
Audio Video
VIDEO IN jack (yellow)AUDIO IN jacks (white) 
						

							74Viewing Snapshots and Movies
4.Now you can display images and play back movies as you normally do.
IMPORTANT!
• Before connecting to a TV to display images, be sure to configure the camera’s 
[r] (REC) and [p] (PLAY) buttons for “Power On” or “Power On/Off” (page 115).
• Audio is initially output by the camera at maximum volume. When you first start 
displaying images, set the TV volume control at a relatively low level and then 
adjust it as required.
NOTE
• Audio is monaural.
• Certain TVs may cut off part of the images.
• All icons and indicators that appear on the monitor screen also appear on the TV 
screen. You can use [8] (DISP) to change the display contents.
Recording Camera Images to a DVD Recorder or Video Deck
Use one of the following methods to connect the camera to the recording device 
using the camera’s bundled AV cable.
– DVD recorder or video deck: Connect to the VIDEO IN and AUDIO IN terminals.
– Camera: USB/AV port
You can play a slideshow of snapshots and movies on the camera and record it on a 
DVD or video tape. When recording images to an external device, use [8] (DISP) to 
clear all indicators from the monitor screen (page 107).
For information about connecting a monitor to the recording device and about how to 
record, see the user documentation that comes with the recording device you are 
using. 
						

							75Other Playback Functions (PLAY)
Other Playback Functions (PLAY)
This section explains menu items that you can use to configure settings and perform 
other playback operations.
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Slideshow
• To stop the slideshow, press [SET]. Pressing [MENU] instead of [SET] stops the 
slideshow and returns to the menu screen.
• Adjust audio volume by pressing [2] and then press [8] or [2] during playback.
• All button operations are disabled while the slideshow is transitioning from one 
image to another.
• The time required for transition from one image to another may be longer in the 
case of an image that was not recorded with this camera.
For information about menu operations, see page 55.
Playing a Slideshow on the Camera (Slideshow)
StartStarts the slideshow
TimeTime from the start to the end of the slideshow
1 to 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes
IntervalAmount of time each image remains displayed
Use [4] and [6] to select a value from 1 to 30 seconds, or “MAX”.
If you specify a value from 1 to 30 seconds, images change at the 
specified interval, but the audio portion of movies and audio snapshots 
will continue to play until the end.
When the slideshow reaches a movie file while “MAX” is selected, only 
the first frame of the movie will displayed. Voice Recording files are not 
played back when “MAX” is selected.
EffectTurns effect on or off.
On: Turns on the image change effect and background music.
Off: No image change effect or background music 
						

							76Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * 
DPOF Printing
See page 84 for details.
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Protect
IMPORTANT!
• Note that even if a file is protected, it will be deleted if you perform the format 
operation (page 117).
Selecting Images for Printing (DPOF Printing)
Protecting a File Against Deletion (Protect)
OnProtects specific files.
1Use [4] and [6] to scroll through the 
files until the one you want to protect is 
displayed.
2Use [8] and [2] to select “On” and 
then press [SET].
An image that is protected is indicated 
by the › icon.
3To protect other files, repeat steps 1 and 2.
To exit the protect operation, press [MENU]. To unprotect a file, 
select “Off” instead of “On” in step 2 above. 
All Files: 
OnProtects all files.1Use [8] and [2] to select “All Files: On” and then press [SET].
2Press [MENU].
To unprotect all files, select “All Files: Off” instead of “All Files: On” in 
step 1 above. 
						

							77Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Rotation
1.Use [8] and [2] to select “Rotation” and then press [SET].
Each press of [SET] will rotate the displayed image 90 degrees left.
2.When the displayed image is at the orientation you want, press 
[MENU].
NOTE
• Note that this procedure does not actually change the image data. It simply alters 
how the image is displayed on the camera’s monitor screen.
• An image that has been protected or zoomed and movie screen cannot be rotated.
• The original (unrotated) version of the image will be displayed on the 12-image 
screen.
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Resize
You can reduce the size of a snapshot and save the result as a separate snapshot. 
The original snapshot is also retained. You can select resize an image to one of three 
image sizes: 8M, 5M, VGA.
• Resizing a 3:2 or 16:9 size snapshot will create an image with an aspect ratio of 
4:3, with both sides cut off.
• The recording date of the resized version of the snapshot will be the same as the 
recording date of the original snapshot.
Rotating an Image (Rotation)
Resizing a Snapshot (Resize) 
						

							78Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Trimming
You can crop a snapshot to trim parts you do not need, 
and save the result in a separate file. The original 
snapshot is also retained.
Use the zoom controller to zoom the image to the size 
you want, use [8], [2], [4], and [6] to display the 
portion of the image you want to cut out, and then press 
[SET].
• The image produced by cropping a 3:2 or 16:9 image 
will have an aspect ratio of 4:3.
• The recording date of the cropped image will be the 
same as the recording date of the original snapshot.
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Dubbing
You can add audio to a snapshot after you shoot it. You can re-record a snapshot’s 
audio whenever you want. You can record up to about 30 seconds of audio for a 
single snapshot.
1.Press the shutter button to start audio 
recording.
Cropping a Snapshot (Trimming)
Adding Audio to a Snapshot (Dubbing)
Represents
snapshot area
Part of snapshot that is
currently displayed
Zoom factor
Remaining recording time 
						

							79Other Playback Functions (PLAY)
2.Press the shutter button again to stop audio 
recording.
• Take care that you do not block the camera’s microphone 
with your fingers while recording.
• Good recording results are not possible when the camera 
is too far away from what you are trying to record.
• Your camera supports the following audio data formats.
– Audio Format: WAVE/IMA-ADPCM (WAV extension)
• Adding audio (dubbing) is not possible for the following 
types of images.
– Protected images
• To delete audio, perform the following operation:
Dubbing * Delete * [SET] * [MENU].
IMPORTANT!
• Note that you cannot restore the original audio of an Audio Snapshot after you 
delete or re-record it.
1.In the PLAY mode, use [4] and [6] to scroll through the images until 
the Audio Snapshot you want is displayed.
An audio snapshot is one that has a ˆ icon.
2.Press [SET] to start playback.
Voice Recording Playback Controls
• Audio of an Audio Snapshot also can be played back on a computer using 
Windows Media Player or QuickTime (pages 93, 101).
To play snapshot audio
Fast forward/fast reverse[4] [6]
Play/pause[SET] 
Volume adjustmentPress [2] and then 
press [8] [2]
Display content switching[8] (DISP)
Stop playback[MENU]
Microphone 
						

							80Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Copy
Files can be copied from the camera’s built-in memory to a memory card or from a 
memory card to built-in memory.
NOTE
• You can copy snapshots, movies, audio snapshots, or Voice Recording files you 
recorded with this camera.
Copying Files (Copy)
Built-in * CardCopies all files from built-in camera memory to a memory card.
This option copies all the files in built-in camera memory. It 
cannot be used to copy a single file.
Card * Built-inCopies a single file on the memory card to camera built-in 
camera memory. Files are copied to the folder in built-in 
memory whose name has the largest serial number.
1Use [4] and [6] to select the file you want to copy.
2Use [8] and [2] to select “Copy” and then press [SET].