Casio Ex S500 Users Guide

FILE MANAGEMENT
151
To display a file in the FAVORITE folder
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “Favorites”, and
then press [].
3.Use [] and [] to select “Show”, and then
press [SET].
•If the FAVORITE folder is empty, the message “No
Favorites file!” appears.
4.Use [] (forward) and
[
] (back) to scroll
through the files in the
FAVORITE folder.
5.After you are finished viewing files, press
[MENU] twice to exit.
File Name
 IMPORTANT! 
•Note that a FAVORITE folder is...

FILE MANAGEMENT
152
To delete a file from the FAVORITE
folder
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “Favorites”, and
then press [].
3.Use [] and [] to select “Show”, and then
press [SET].
4.Press [] ( ).
5.Use [
] and [] to select the file you want to
delete from the FAVORITE folder.
6.Use [] and [] to select “Delete”, and then
press [SET].
•To exit the file delete operation without deleting
anything, select “Cancel”.
7.After deleting all of the files you want, use []...

OTHER SETTINGS
153
OTHER SETTINGS
Configuring Sound Settings
You can configure different sounds to play whenever you
turn on the camera, press the shutter button half-way or all
the way, or perform a key operation.
To configure sound settings
1.Press [MENU].
2.Select the “Set Up” tab, select “Sounds”, and
then press [].
3.Use [] and [] to select the sound whose
setting you want to configure, and then press
[].
4.Use [] and [] to change the setting, and
then press [SET].
Select this setting:
Sound 1...

OTHER SETTINGS
154
To set the audio volume level for movie
and audio snapshot playback
1.Press [MENU].
2.Select the “Set Up” tab, select “Sounds”, and
then press [].
3.Use [] and [] to select “ Play”.
4.Use [
] and [] to specify the playback
volume setting you want, and then press
[SET].
•You can set the playback volume in the range of 0
(no sound) to 7 (loudest).
 IMPORTANT! 
•The volume setting you make here does not affect
the video output volume level (page 142).
Specifying an Image for the...

OTHER SETTINGS
155
 IMPORTANT! 
• You can select any one of the following types of
image as the startup image.
— The camera’s built-in image
— A snapshot
— The image only of an audio snapshot
— A movie whose file size is less than the amount of
unused built-in memory still available
• Only one image can be stored in startup image
memory at one time. Selecting a new startup image
overwrites anything that is already stored in startup
image memory. Because of this, if you want to return
to a previous...

OTHER SETTINGS
156
Setting the Clock
Use the procedures in this section to select a Home Time
Zone, and to change its date and time settings. If you want
to change the time and date setting only without changing
the Home Time Zone, perform the procedure under “To set
the current time and date” (page 157) only.
 IMPORTANT! 
•Make sure you select your Home Time zone (the
zone where you are currently located) before
changing the time and date settings. Otherwise, the
time and date setting will change...

OTHER SETTINGS
157
To set the current time and date
1.Press [MENU].
2.Select the “Set Up” tab, select “Adjust”, and
then press [].
3.Set the current date and the time.
Do this:
Press [] or [].
Press [
] or [].
Press [BS].
To do this:
Change the setting at the current
cursor location
Move the cursor between settings
Toggle between 12-hour and 24-
hour timekeeping
4.When all the settings are the way you want,
press [SET] to register them and exit the
setting screen.
Changing the Date Format
You can...

OTHER SETTINGS
158
Using World Time
You can use the World Time screen to select a time zone
and instantly change the time setting of the camera’s clock
when you go on a trip, etc. World Time lets you select one
of 162 cities in 32 time zones.
To display the World Time screen
1.Press [MENU].
2.Select the “Set Up” tab, select “World Time”,
and then press [].
3.Use [] and [] to select “World”.
Select this:
Home
World
To do this:
Display the time in your home time zone
Display the time in the zone...

OTHER SETTINGS
159
5.Use [], [], [
], and
[] to select the
geographical area you
want, and then press
[SET].
6.Use [] and [] to select the city you want,
and then press [SET].
7.When the setting is the way you want, press
[SET] to apply it and exit the setting screen.
Changing the Display Language
You can use the following procedure to select one of ten
languages as the display language.
1.Press [MENU].
2.Select the “Set Up” tab, select “Language”,
and then press [].
3.Use [], [], [
], and [] to...

OTHER SETTINGS
160
Changing the USB Port Protocol
You can use the procedure below to change the
communication protocol of the camera’s USB port when
connecting to a computer, printer, or other external device.
Select the protocol that suits the device to which you are
connecting.
1.Press [MENU].
2.Select the “Set Up” tab, select “USB”, and
then press [].
3.Use [] and [] to select the setting you
want, and then press [SET].
Select this setting:
Mass Storage (USB
DIRECT-PRINT)
PTP (PictBridge)* When...