Casio Ex S200 Users Guide

8Creating a Dynamic Photo Image
4.Use [4] and [6] to select the subject you want 
to insert and then press [SET].
*Only subjects that can be inserted into other images will 
appear at this time.
5.If you are inserting a subject into a movie an 
image will appear on the monitor screen 
showing the approximate location of the subject 
in the movie. Use [4] and [6] to shift the 
location to the position you want. After you are 
finished, press [SET].
• If you insert a subject into a movie, the resulting...

9Creating a Dynamic Photo Image
Four Tips for Good Subject Cropping
• When shooting the subject image, shoot against a 
white wall or some other surface whose color is 
different from that of the subject. The camera will 
not be able to crop the subject image properly if 
its color is the same as or similar to the 
background color.
• Select a blank wall for the subject background, 
not one with a complex pattern or shapes.
Find a blank wall whose 
color is different from that 
of the subject.
Look for a...

10Creating a Dynamic Photo Image
Move the subject away from the wall to avoid 
shadows!
The camera may mistake shadows on the wall or floor 
caused by strong sunlight, illumination, or other light sources 
as part of the subject. Shadows tend to form when the 
subject is too close to a wall. Have the subject move as far 
away as possible from the wall.
Do not use a moving background!
Good cropping is not possible if anything besides the 
subject is moving in the images. For example, avoid 
breaking...

11Creating a Dynamic Photo Image
Normally you need to shoot the subject you want to extract against a background and 
then shoot the background again without the subject. When the subject is against a 
plain background, however, you can extract the subject after shooting only once. 
Perform the following procedure when you want to change the “Number of Shots” 
setting.
1.Before shooting the subject in step 4 under “Step 1: Shoot the 
subject.” (page 6), press [SET].
2.Use [8] and [2] to select the third...

12Creating a Dynamic Photo Image
You can write text on a blank sheet of paper, shoot an image of it, and then use the 
following procedure to extract the text for insertion into an image.
1.Before shooting the subject in step 4 under “Step 1: Shoot the 
subject.” (page 6), press [SET].
2.Use [8] and [2] to select the third Control Panel option from the 
bottom (Select Subject Type) and then press [SET].
3.Use [8] and [2] to select “Number of Shots” and then press [SET].
4.Use [8] and [2] to select “Text”...

13Creating a Dynamic Photo Image
A Dynamic Photo with a still image background and a moving subject is stored as a 
series of 20 still images. You can use the following procedure to convert the 
20 images that make up a Dynamic Photo to a movie.
1.Press [p] to enter the PLAY mode.
2.Use [4] and [6] to display the Dynamic Photo 
you want to convert.
3.Press [SET], use [8] and [2] to select the 
bottom PLAY Panel item (MENU), and then press 
[SET].
4.Perform the following operation on the camera PLAY tab *...

14Creating a Dynamic Photo Image
On a PCEnjoy watching Dynamic 
Photo images on your PC 
screen.In a digital photo 
frame
Play Dynamic Photo images 
in a digital photo frame.
On a cell phoneView Dynamic Photo images on your cell phone 
screen.Share with your friendsSend the Dynamic Studio 
URL to your friends and share 
your Dynamic Photo 
creations with them.
e-Greeting CardsSend animated e-greeting cards to your special 
friends and family members.For presentationsAnimation GIF files can be 
included...