Casio EX N20 User Manual

91Using the Camera with a Computer
The camera stores images you shoot in accordance with the Design Rule for Camera 
File System (DCF).
.About DCF
The following operations are supported for DCF-compliant images. Note, however, 
that CASIO makes no performance guarantees concerning these operations.
• Transferring this camera’s DCF-compliant images to another manufacturer’s 
camera and view them.
• Printing this camera’s DCF-compliant images on another manufacturer’s printer.
• Transferring another...

92Using the Camera with a Computer
.Supported Image Files
• Image files shot with this camera
• DCF-compliant image files
This camera may not be able to display an image, even if it is DCF-compliant. When 
displaying an image recorded on another camera, it may take a long time for the 
image to appear on this camera’s monitor screen.
.Built-in Memory and Memory Card Data Handling Precautions
• Whenever copying memory contents to your computer, you should copy the DCIM 
folder and all of its contents. A...

93Other Settings (Set Up)
Other Settings (Set Up)
This section explains menu items that you can use to configure settings and perform 
other operations in both the REC mode and PLAY mode.
Procedure
[SET] * MENU * “Set Up” Tab * Eye-Fi
Select “Off” to disable Eye-Fi card communication (page 88).
Procedure
[SET] * MENU * “Set Up” Tab * Sounds
• Setting a volume level of 0 mutes output.
See the following for more information.
– REC Menu (page 50)
– PLAY Menu (page 69)
Turning off Eye-Fi Card Communication...

94Other Settings (Set Up)
Procedure
[SET] * MENU * “Set Up” Tab * Startup
Display the image you want to use as your startup image and then select “On”.
• The startup image does not appear when you turn on the camera by pressing 
[p] (PLAY).
• You can specify a snapshot you recorded as the startup image, or you can use the 
special startup image provided in the camera’s built-in memory.
• If you select an audio snapshot as the startup image, the audio will not play at 
startup.
• Formatting built-in...

95Other Settings (Set Up)
Procedure
[SET] * MENU * “Set Up” Tab * World Time
You can use the World Time screen to view the current time in a zone that is different 
from your Home City when you go on a trip, etc. World Time displays the current time 
in 162 cities in 32 time zones around the globe.
1.Use [8] and [2] to select “Destination” and then press [6].
• To change the geographic area and city for the time where you normally use 
the camera, select “Home”.
2.Use [8] and [2] to select “City” and...

96Other Settings (Set Up)
Procedure
[SET] * MENU * “Set Up” Tab * Timestamp
You can configure the camera to stamp the recording date only, or date and time in 
the lower right corner of each snapshot.
• Once date and time information is stamped into a snapshot, it cannot be edited or 
deleted.
Example: July, 10, 2015, 1:25 p.m.
• Even if you do not stamp the date and/or time with Timestamp, you can do so later 
using the DPOF function or some printing application (page 79).
• Digital zoom is disabled...

97Other Settings (Set Up)
Procedure
[SET] * MENU * “Set Up” Tab * Date Style
You can select from among three different styles for the date.
Example: July, 10, 2015
Procedure
[SET] * MENU * “Set Up” Tab * Language
.Specify the display language you want.
1Select the tab on the right.
2Select “Language”.
3Select the language you want.
• Camera models sold in certain geographic areas 
may not support display language selection.
Procedure
[SET] * MENU * “Set Up” Tab * Sleep
This feature turns off the monitor...

98Other Settings (Set Up)
Procedure
[SET] * MENU * “Set Up” Tab * Auto Power Off
Auto Power Off turns off the camera whenever no camera operation is performed for 
a preset amount of time.
Trigger Time Settings: 1 min, 2 min, 5 min (The trigger time is always 5 minutes in the 
PLAY mode.)
• Auto Power Off is disabled under any of the following conditions.
– While the camera is connected to a computer or other device
– During a slideshow
– During “O Tracking”
– During Voice Recording playback or...

99Other Settings (Set Up)
Procedure
[SET] * MENU * “Set Up” Tab * Ü Disabled
The camera will not start the image delete operation when you press [ ] (Delete) 
while “Ü Disabled” is turned on.
You can protect against accidental deletion of images by selecting “On” for 
“Ü Disabled”.
• Performing a format operation (page 100) will cause all images to be deleted, even 
if file deletion is disabled (“On” selected for “Ü Disabled”) for some images.
Procedure
[SET] * MENU * “Set Up” Tab * Video Out
You can use...

100Other Settings (Set Up)
Procedure
[SET] * MENU * “Set Up” Tab * Format
If a memory card is loaded in the camera, this operation will format the memory card. 
It will format built-in memory if no memory card is loaded.
• The format operation will delete all contents on the memory card or in built-in 
memory. It cannot be undone. Make sure you do not need any data currently on 
the card or in built-in memory before you format it.
• Formatting built-in memory will delete the following data.
– Protected...