Casio EX N10 User Manual

11
.Movie Playback
.Configuring Monitor Screen Settings
You can turn display information on and off by pressing [8] (DISP). You can 
configure separate settings for the REC mode and PLAY mode.
REC mode
PLAY mode
1File type
2Protect indicator (page 73)
3Folder name/file name (page 90)
4Movie recording time (page 42)
5Movie image quality (page 34)
6Date/time (page 96)
7Battery level indicator (page 17)
8Eye-Fi (page 88)
Information 
display onDisplays information about image settings, etc.
Information...

12Quick Start Basics
Quick Start Basics
Your CASIO camera is packed with a powerful selection of features and functions to 
make recording of digital images easier, including the following main functions.
What you can do with your CASIO camera
Premium Auto
Select Premium Auto recording and the 
camera automatically determines whether you 
are shooting a subject or scenery, and other 
conditions. Premium Auto delivers higher 
image quality than standard Auto.
Make-up Function
The Make-up Function smoothes...

13Quick Start Basics
Note that the battery of a newly purchased camera is not charged. Perform the steps 
below to load the battery into the camera and charge it.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-80) for 
power. Never try to use any other type of battery.
1.Open the battery cover.
2.Load the battery.
With the EXILIM logo on 
the battery facing 
downwards (in the 
direction of the lens), hold 
the stopper next to the 
battery in the direction 
indicated by the...

14Quick Start Basics
To replace the battery
1.Open the battery cover and 
remove the current battery.
2.Load a new battery.
You can use either of the two following methods to charge the camera’s battery.
• USB-AC adaptor
• USB connection to a computer
.To charge with the USB-AC adaptor
The adaptor lets you charge the battery while it is loaded in the camera.
While the camera is turned off, connect in the sequence shown below (
1, 2, 3, 
4).
Charging time: Approximately 120 minutes
Charge the Battery...

15Quick Start Basics
IMPORTANT!
• Make sure that you insert the cable connector into the USB/
AV port until you feel it click securely into place. Failure to 
insert the connector fully can result in poor communication or 
malfunction.
• Note that even while the connector is fully inserted, you still 
will be able to see the metal part of the connector as shown in 
the illustration.
Back Lamp Operation
.To charge using a USB connection to a computer
USB connection lets you 
charge the battery while it is...

16Quick Start Basics
IMPORTANT!
• The first time you connect the camera to your computer with the USB cable, an 
error message may appear on your computer. If this happens, disconnect and then 
reconnect the USB cable.
• Depending on the setup of your computer, you may not be able to charge the 
camera’s battery over a USB connection. If this happens, use of the USB-AC 
adaptor that comes with the camera is recommended.
• Charging is not performed while the connected computer is in the hibernate mode....

17Quick Start Basics
Checking Remaining Battery Power
As battery power is consumed, a battery indicator on the monitor screen indicates 
remaining power as shown below.
 indicates battery power is low. Charge the battery as soon as possible.
Recording is not possible when   is indicated. Charge the battery immediately.
• The level shown by the battery indicator may change when you switch between the 
REC mode and PLAY mode.
• Leaving the camera for about 30 days with no power supplied while the battery...

18Quick Start Basics
The first time you load a battery into the camera, a screen appears for configuring the 
display language, date, and time settings. Failure to set the date and time correctly 
will cause the wrong date and time data to be recorded with images.
IMPORTANT!
• A screen for language selection will not appear in step 2 of the procedure below if 
you purchased a camera intended for the Japanese market. To change the display 
language from Japanese in this case, use the procedure under...

19Quick Start Basics
NOTE
• Each country controls its local time offset and the use of summer time, and so they 
are subject to change.
• Removing the battery from the camera too soon after configuring time and date 
settings for the first time can cause the settings to be reset to their factory defaults. 
Do not remove the battery for at least 24 hours after configuring settings.
Though the camera has built-in memory that can be used to store images and 
movies, you probably will want to purchase a...

20Quick Start Basics
1.Press [ON/OFF] (Power) to turn off 
the camera and then open the 
battery cover.
2.Load a memory card.
Positioning the memory card so its front 
is facing upwards (towards the monitor 
screen side of the camera), slide it into 
the card slot all the way in until you hear 
it click securely into place.
3.Close the battery cover.
IMPORTANT!
• Never insert anything besides a supported memory card (page 19) into the memory 
card slot.
• Should water or any foreign object ever get into...