Casio EX FH25 User Manual

							
141Using the Camera with a Computer
7.Drag the “DCIM” folder to the folder to which you want to copy it.
8.After the copy operation is complete, drag the drive icon to Trash.
9.On the camera, press [ON/OFF] to  turn off the camera. After making 
sure that the green back lamp is un lit, disconnect the camera from the 
computer.
. To view copied images
1.Double-click the camera’s drive icon.
2.Double-click the “DCIM” folder to open it.
3.Double-click the folder that contai ns the images you want to view.
4.Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 146.
• An image that was rotated on the camera will be displayed on your Macintosh 
screen in its original (unrotated) orientation.
• Viewing a CS image on a computer will  individually display the component 
images in the CS group. A CS group cannot be viewed as a CS image on a 
computer.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing  images. Doing so can cause data to become corrupted.
Never use your computer to modify, delete, move, or rename any image files 
that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with t
he camera’s image management data, which 
will make it impossible to play back imag es on the camera and can drastically alter 
remaining memory capacity. Whenever y ou want to modify, delete, move, or 
rename an image, do so only on images that are stored on your computer. 
						

							
142Using the Camera with a Computer
If you are running Mac OS X, you can manage snapshots using iPhoto, which comes 
bundled with some Macintosh products. If  you are running Mac OS 9, you will need to 
use commercially available software.
You can use QuickTime, which comes bundled  with your operating system, to play 
back movies on a Macintosh.  To play back a movie, first copy it to your Macintosh 
and then double-click the movie file.
. Minimum Computer System Re quirements for Movie Playback
The minimum system requirements descri bed below are necessary to play back 
movies recorded with this camera on a computer.
• The above are recommended system environments. Configuring one of these  environments does not guarantee proper operation.
• Certain settings and other installed software may interfere with proper playback of  movies.
. Movie Playback Precautions
Proper movie playback may not be possi ble on some Macintosh models. If you 
experience problems, try the following. – Change the movie image quality setting to “STD”.
– Upgrade to the latest version of QuickTime.
– Shut down other applications that are running.
Even if proper playback is not possible on y our Macintosh, you can use the AV cable 
that comes bundled with the camera to connect to the video input terminal of a TV or 
Macintosh and play back movies that way.
IMPORTANT!
• Be sure to move the movie data to the hard disk of your Macintosh before trying to  play it. Proper movie playback may not  be possible for data accessed over a 
network, from a memory card, etc.
Transferring Images Automati cally and Managing Them on 
Your Macintosh
Playing a Movie
Operating System : Mac OS X 10.3.9 or higher
Required Software : QuickTime 7 or higher 
						

							
143Using the Camera with a Computer
You must have Adobe Reader or Adobe Acrobat Reader installed on your computer 
in order to view the contents of a PDF file. If you don’t, go to the Adobe Systems 
Incorporated website and install Acrobat Reader.
1.On the CD-ROM, open the “Manual” folder.
2.Open the “Digital Camera” folder and then open the folder for the 
language whose user’s gu ide you want to view.
3.Open the file named “camera_xx.pdf”.
• “xx” is the language code (Example:  camera_e.pdf is for English.)
Internet registration only is supported. Visi t the following CASIO website to register:
http://world.casio.com/qv/register/
Shooting with an Eye-Fi wireless SD memory card loaded in the camera makes it 
possible to transfer image data automatically to a computer via wireless LAN.
1.Configure LAN access point,  transfer destination and other settings for 
the Eye-Fi card in accordance with th e instructions that come with the 
Eye-Fi card.
2.After configuring settings, load th e Eye-Fi card into the camera and 
record.
Images you record are sent by wire less LAN to your computer, etc.
• For full details, see the user document ation that comes with the Eye-Fi card.
• Before formatting a new Eye-Fi card to us e it for the first time, copy the Eye-Fi 
Manager install files to your computer. Do this before formatting the card.
Viewing User Documentation (PDF Files)
User Registration
Using an Eye-Fi Wireless SD Memory Card to Transfer Images 
(Eye-Fi) 
						

							
144Using the Camera with a Computer
IMPORTANT!
• Recorded images are transferred over wireless LAN. Do not use the Eye-Fi card or turn off Eye-Fi card communication (page 148) when on an aircraft or in any other 
location where use of wireless commu nication is limited or prohibited.
• Loading an Eye-Fi card will cause the Eye-Fi indicator   to 
appear on the monitor screen. Its transparent or not transparent 
appearance indicates the communication status as shown below.
• A communication icon   will appear on the monitor screen while image data  transfer is in progress.
• The camera’s Auto Power Off (page 153) function is disabled while image data 
transfer is in progress.
• A confirmation message will appear on the m onitor screen if you try to turn off the 
camera while image data transfer is in progress. Follow the instructions in the 
messages (page 180).
• Transfer of a large number of images can take some time to complete.
• The original images remain on the Eye-Fi card after the image data transfer.
• Recording a movie to an Eye-Fi card may result in movie frames being dropped.
• Proper Eye-Fi card data communication may not be possible due to camera 
settings, battery level, or operating conditions.
Transparent Access point cannot be found or no transferable 
image data exists.
Not transparent
Image transfer in progress 
						

							
145Using the Camera with a Computer
The camera creates a file each time you shoot a snapshot, record a movie, or 
perform any other operation that stores data. Files are grouped by storing them in 
folders. Each file and folder has its own unique name.• For details about how folders are organized in memory, see “Memory Folder  Structure” (page 146).
• You can view folder and file names on y our computer. For details about how file 
names are displayed on the camera’s  monitor screen, see pages 12 and 13.
• The total number of folders and files allowed depends on the image size and  quality, and capacity of the memory card being used for storage.
Files and Folders
Name and Maximum Number AllowedExample
File
Each folder can contain up to 9999 files named 
CIMG0001 through CIMG9999. The extension 
on the file name depends on the file type. 26th file name:
Folders
Folders are named from 100CASIO to 
999CASIO
There can be up to 900 folders in memory.
• Images recorded with the YouTube mode are  stored in a folder named “100YOUTB”. 100th folder name:
CIMG0026.JPG
Extension
Serial number 
(4 digits)
100CASIO
Serial number (3 digits) 
						

							
146Using the Camera with a Computer
The camera stores images you shoot in accordance with the Design Rule for Camera 
File System (DCF).
.About DCF
DCF is a standard that makes it possible to view and print images recorded on one 
manufacturer’s camera on DCF-compliant de vices produced by other manufacturers. 
You can transfer DCF-compliant images re corded with another camera to this 
camera and view them on this camera’s monitor screen.
. Memory Folder Structure
DCIM Folder
Recording Folder
Image File
Movie File
Recording Folder
Recording Folder
DPOF File Folder
DPOF File
RAW Image Folder
RAW Image Record Folder
RAW Image File
Snapshot BEST SHOT User Setup Folder
Background Music Folder
Background Music File
Background Music File
Startup Image File
*1The YouTube mode can be used to record movies are optimized for uploading to 
YouTube. Images recorded with the YouTube mode are stored in a folder named 
“100YOUTB”.
*2This folder or file can be created in built-in memory only.*3RAW image data is stored with the same file name in a folder with the same folder 
name as the corresponding JPEG memory that is recorded at the same time.
Memory Card Data
DCIM
100CASIO  *1
CIMG0001.JPG*
100CASIO CIMG001.DNG CIMG0002.AVI
101CASIO 
*
1
*3*3
102CASIO *1
MISC
AUTPRINT.MRK
SSBGM001.WAV
SSBGM002.WAV
SCENE 
*
2
SSBGM 
STARTING.JPG *
2
RAW  
						

							
147Using the Camera with a Computer
.Supported Image Files
• Image files shot with this camera
• DCF-compliant image files
This camera may not be able to display an image, even if it is DCF-compliant. When 
displaying an image recorded on another camera, it may take a long time for the 
image to appear on this camera’s monitor screen.
. Built-in Memory and Memory Ca rd Data Handling Precautions
• Whenever copying memory contents to y our computer, you should copy the DCIM 
folder and all of its contents. A good way to keep track of multiple DCIM folders it to 
change their names to dates or something  similar after you copy them to your 
computer. If you later decided to return a  DCIM folder to the camera, however, be 
sure to change its name back to DCIM. The camera is designed to recognize only a 
root file with the name DCIM. Note the camera also will not be able to recognize the 
folders inside the DCIM folder unless t hey have the names they originally had 
when you copied them from the camera to your computer.
• Folders and files must be stored in accordance with the “Memory Folder Structure”  shown on page 146 in order for the camera to be able to recognize them correctly.
• You also can use a PC card adapter or a memory card reader/writer to access  camera files directly from the camera’s memory card. 
						

							
148Other Settings (Set Up)
Other Settings (Set Up)
This section explains menu items that you can use to configure settings and perform 
other operations in both the REC mode and PLAY mode.
Procedure
[MENU]  * Set Up Tab  * Screen
Procedure
[MENU]  * Set Up Tab  * Eye-Fi
Select “Off” to disable Eye-Fi card communication (page 143).
Procedure
[MENU]  * Set Up Tab  * Auto Rotate
The camera automatically detects whether a snapshot image was shot in portrait or 
landscape orientation and displays it accord ingly. Auto rotation is not performed for 
movies.
For information about menu operations, see page 92.
Adjusting Monitor Screen Brightness (Screen)
Auto 2/
Auto 1 With this setting, the camera detects available light levels and 
automatically adjusts the brightness 
of the monitor screen accordingly. 
“Auto 2” changes monitor screen bri ghtness relatively more quickly than 
“Auto 1” when surrounding light is bright.
+2 Brightness that is greater than +1, which makes the screen easier to 
view. This setting consumes more power.
+1
Bright setting for outdoor use, etc. Brightness that is greater than 0.
0Normal monitor screen brightness for indoor use, etc.
Turning off Eye-Fi Card Communication (Eye-Fi)
Auto Image Orientation Detection and Rotation (Auto Rotate)
OnAutomatically rotates snapshots shot with the camera held vertically 90 
degrees.
Off
Images not rotated automatically. 
						

							
149Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab  * EVF Brightness
You can use the above procedure to change the brightness of the viewfinder. You 
can select one of three levels from +2 (brightest) to 0 (normal).
Procedure
[MENU]  * Set Up Tab  * Sounds
• Setting a volume level of 0 mutes output.
Procedure
[MENU]  * Set Up Tab  * World Time
You can use the World Time screen to view the current time in a zone that is different 
from your Home City when you go on a trip, et c. World Time displays the current time 
in 162 cities in 32 time zones around the globe.
1.Use [ 8] and [ 2] to select “World ” and then press [ 6].
• To change the geographic area and city for the time where you normally use 
the camera, select “Home”.
Adjusting Viewfinder Brightness (EVF Brightness)
Configuring Camera Sound Settings (Sounds)
Startup
Specifies the startup sound.
Sound 1 - 5: Built-in sounds (1 through 5)
Off: Sound off
Half Shutter
Shutter
Operation
 OperationSpecifies the sound volume. This setting is also used as the 
audio level during video output (page 110).
 PlaySpecifies the volume of movie audio output. This volume 
setting is not used during video output (from the USB/AV port) 
(page 110).
Configuring World Time Settings (World Time)
=
= 
						

							
150Other Settings (Set Up)
2.Use [8] and [ 2] to select “City” and then press [ 6].
• To change the “World” setting to summer time, use [ 8] and [ 2] to select 
“DST” and then select “On”. Summer time is used in some geographical areas 
to advance the current time setting by one hour during the summer months.
3.Use [ 8], [ 2], [ 4], and [ 6] to select the geographic area you want and 
then press [SET].
4.Use [ 8] and [ 2] to select the city you  want and then press [SET].
5.Press [SET].
IMPORTANT!
• Before configuring World Time settings, make  sure that the Home City setting is 
the place where you live or normally use the  camera. If it isn’t, select “Home” on the 
screen in step 1 and configure the Home Ci ty, date, and time settings as required 
(page 151).
Procedure
[MENU]  * Set Up Tab  * File No.
Use the following procedure to specify the  rule that governs generation of the serial 
number used in file names (page 145).
Specifying the File Name Seri al Number Generation Rule 
(File No.)
Continue Tells the camera to remember the last used file number. A new file will 
be named using the next sequential num
ber, even if files are deleted or 
if a blank memory card is loaded. If a memory card is loaded and that 
card already has files stored on it and the largest sequential number in 
the existing file names is greater  than the largest sequential number 
remembered by the camera, numbering of new files will start from the 
largest sequential number in the memory card file names plus 1.
Reset Restarts the serial number from 0
001 whenever all files are deleted or 
when the memory card is replaced with a blank one. If a memory card 
is loaded and that card already has  files stored on it, numbering of new 
files will start from the largest sequential number in the memory card 
file names plus 1.