Casio Ex Fh20 Users Guide

							121Using the Camera with a Computer
8.After the copy operation is complete, drag the drive icon to Trash.
9.On the camera, press [ON/OFF] to turn off the camera. After making 
sure that the green back lamp is unlit, disconnect the camera from the 
computer.
.To view copied images
1.Double-click the camera’s drive icon.
2.Double-click the “DCIM” folder to open it.
3.Double-click the folder that contains the images you want to view.
4.Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 124.
• An image that was rotated on the camera will be displayed on your Macintosh 
screen in its original (unrotated) orientation.
IMPORTANT!
• Never use your computer to modify, delete, move, or rename any image files that 
are in the camera’s built-in memory or on its memory card. Doing so can cause 
problems with the camera’s image management data, which will make it impossible 
to play back images on the camera and can drastically alter remaining memory 
capacity. Whenever you want to modify, delete, move, or rename an image, do so 
only on images that are stored on your computer.
• Never unplug the USB cable, or operate the camera while viewing or storing 
images. Doing so can cause data to become corrupted.
If you are running Mac OS X, you can use the iPhoto application that comes bundled 
with the operating system to manage your images. If you are running Mac OS 9, you 
will need to use commercially available software.
You can use QuickTime, which comes bundled with your operating system, to play 
back movies on a Macintosh. To play back a movie, first copy it to your Macintosh 
and then double-click the movie file.
Transferring Images Automatically and Managing Them on 
Your Macintosh
Playing a Movie
B 
						

							122Using the Camera with a Computer
.Minimum Computer System Requirements for HD Movie Playback
The minimum system requirements described below are necessary to play back HD 
movies recorded with this camera on a computer.
• The above are recommended system environments. Configuring one of these 
environments does not guarantee proper operation.
• Certain settings and other installed software may interfere with proper playback of 
movies.
.Movie Playback Precautions
Proper movie playback may not be possible on some Macintosh models. If you 
experience problems, try the following.
– Change the movie image quality setting to “STD”.
– Upgrade to the latest version of QuickTime.
– Shut down other applications that are running.
Even if proper playback is not possible on your Macintosh, you can use the AV cable 
that comes bundled with the camera to connect to the video input terminal a TV or 
Macintosh and play back movies that way.
IMPORTANT!
• Be sure to move the movie data to the hard disk of your Macintosh before trying to 
play it. Proper movie playback may not be possible for data accessed over a 
network, from a memory card, etc.
You must have Adobe Reader or Adobe Acrobat Reader installed on your computer 
in order to view the contents of a PDF file. If you don’t, go to the Adobe Systems 
Incorporated website and install Acrobat Reader.
1.On the CD-ROM, open the “Manual” folder.
2.Open the “Digital Camera” folder and then open the folder for the 
language whose user’s guide you want to view.
3.Open the file named “camera_xx.pdf”.
• “xx” is the language code (Example: camera_e.pdf is for English.)
Internet registration only is supported. Visit the following CASIO website to register:
http://world.casio.com/qv/register/ Operating System : Mac OS X 10.3.9 or higher
Required Software : QuickTime 7 or higher
Viewing User Documentation (PDF Files)
User Registration
B 
						

							123Using the Camera with a Computer
The camera creates a file and saves it each time you shoot a snapshot, record a 
movie, or perform any other operation that stores data. Files are grouped by storing 
them in folders. Each file and folder has its own unique name.
• For details about how folders are organized in memory, see “Memory Folder 
Structure” (page 124).
• You can view folder and file names on your computer. For details about how file 
names are displayed on the camera’s monitor screen, see page 157.
• The total number of folders and files allowed depends on the image size and 
quality, and capacity of the memory card being used for storage.
Files and Folders
Name and Maximum Number AllowedExample
File
Each folder can contain up to 9999 files named 
CIMG0001 through CIMG9999. The extension 
on the file name depends on the file type.26th file name:
Folders
Folders are named from 100CASIO to 
999CASIO
There can be up to 900 folders in memory.
• Images recorded with the YouTube mode are 
stored in a folder named “100YOUTB”. 100th folder name:
CIMG0026.JPG
Extension Serial number 
(4 digits)
100CASIO
Serial number (3 digits) 
						

							124Using the Camera with a Computer
The camera stores images you shoot in accordance with the Design Rule for Camera 
File System (DCF).
.About DCF
DCF is a standard that makes it possible to view and print images recorded on one 
manufacturer’s camera on DCF-compliant devices produced by other manufacturers. 
You can transfer DCF-compliant images recorded with another camera to this 
camera and view them on this camera’s monitor screen.
.Memory Folder Structure
DCIM Folder
Recording Folder
Image File
Movie File
Recording Folder
Recording Folder
DPOF File Folder
DPOF File
RAW Image Folder
RAW Image Record Folder
RAW Image File
Snapshot BEST SHOT User Setup Folder
Startup Image File
*1The YouTube mode can be used to record movies are optimized for uploading to 
YouTube. Images recorded with the YouTube mode are stored in a folder named 
“100YOUTB”.
*2This folder or file can be created in built-in memory only.*3RAW image data is stored with the same file name in a folder with the same folder 
name as the corresponding JPEG memory that is recorded at the same time.
Memory Card Data
DCIM
 100CASIO *1
   CIMG0001.JPG*
100CASIO CIMG001.DNG    CIMG0002.AV I
   101CASIO *
1
*3*3
   102CASIO *1
MISC
 AUTPRINT.MRK
SCENE 
STARTING.JPG*
2
*2
RAW  
						

							125Using the Camera with a Computer
.Supported Image Files
• Image files shot with this camera
• DCF-compliant image files
This camera may not be able to display an image, even if it is DCF-compliant. When 
displaying an image recorded on another camera, it may take a long time for the 
image to appear on this camera’s monitor screen.
.Built-in Memory and Memory Card Data Handling Precautions
• Whenever copying memory contents to your computer, you should copy the DCIM 
folder and all of its contents. A good way to keep track of multiple DCIM folders it to 
change their names to dates or something similar after you copy them to your 
computer. If you later decided to return a DCIM folder to the camera, however, be 
sure to change its name back to DCIM. The camera is designed to recognize only a 
root file with the name DCIM. Note the camera also will not be able to recognize the 
folders inside the DCIM folder unless they have the names they originally had 
when you copied them from the camera to your computer.
• Folders and files must be stored in accordance with the “Memory Folder Structure” 
shown on page 124 in order for the camera to be able to recognize them correctly.
• You also can use a PC card adapter or a memory card reader/writer to access 
camera files directly from the camera’s memory card. 
						

							126Other Settings (Set Up)
Other Settings (Set Up)
This section explains menu items that you can use to configure settings and perform 
other operations in both the REC mode and PLAY mode.
Procedure
[MENU] * Set Up Tab * Screen
Procedure
[MENU] * Set Up Tab * EVF Brightness
You can use the above procedure to change the brightness of the viewfinder. You 
can select one of three levels from +2 (brightest) to 0 (normal).
For information about menu operations, see page 76.
Adjusting Monitor Screen Brightness (Screen)
Auto 2/
Auto 1With this setting, the camera detects available light levels and 
automatically adjusts the brightness of the monitor screen accordingly. 
“Auto 2” changes monitor screen brightness relatively more quickly than 
“Auto 1” when surrounding light is bright.
+2Brightness that is greater than +1, which makes the screen easier to view. 
This setting consumes more power.
+1Bright setting for outdoor use, etc. Brightness that is greater than 0.
0Normal monitor screen brightness for indoor use, etc.
Adjusting Viewfinder Brightness (EVF Brightness) 
						

							127Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Sounds
• Setting a volume level of 0 mutes output.
Procedure
[MENU] * Set Up Tab * File No.
Use the following procedure to specify the rule that governs generation of the serial 
number used in file names (page 123).
Configuring Camera Sound Settings (Sounds)
Startup
Specifies the startup sound
Sound 1 - 5: Built-in sounds (1 through 5)
Off: Sound off
Half Shutter
Shutter
Operation
 OperationSpecifies the sound volume. This setting is also used as the 
audio level during video output (page 133).
 PlaySpecifies the volume of movie audio output. This volume 
setting is not used during video output (from the USB/AV port) 
(page 133).
Specifying the File Name Serial Number Generation Rule 
(File No.)
ContinueTells the camera to remember the last used file number. A new file will 
be named using the next sequential number, even if files are deleted or 
if a blank memory card is loaded. If a memory card is loaded and that 
card already has files stored on it and the largest sequential number in 
the existing file names is greater than the largest sequential number 
remembered by the camera, numbering of new files will start from the 
largest sequential number in the existing file names plus 1.
ResetRestarts the serial number from 0001 whenever all files are deleted or 
when the memory card is replaced with a blank one. If a memory card 
is loaded and that card already has files stored on it, numbering of new 
files will start from the largest sequential number in the existing file 
names number plus 1.
=
= 
						

							128Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * World Time
You can use the World Time screen to view the current time in a zone that is different 
from your Home City when you go on a trip, etc. World Time displays the current time 
in 162 cities in 32 time zones around the globe.
1.Use [8] and [2] to select “World” and then press [6].
• To change the geographic area and city for the time where you normally use 
the camera, select “Home”.
2.Use [8] and [2] to select “City” and then press [6].
• To change the “World” setting to summer time, use [8] and [2] to select 
“DST” and then select “On”. Summer time is used in some geographical areas 
to advance the current time setting by one hour during the summer months.
3.Use [8], [2], [4], and [6] to select the geographic area you want and 
then press [SET].
4.Use [8] and [2] to select the city you want and then press [SET].
5.Press [SET].
Configuring World Time Settings (World Time) 
						

							129Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Timestamp
You can configure the camera to stamp the recording date only, or date and time in 
the lower right corner of each snapshot.
• Once date and time information is stamped into a snapshot, it cannot be edited or 
deleted.
Example: December 19, 2009, 1:25 p.m.
• Even if you do not stamp the date and/or time with Timestamp, you can do so later 
using the DPOF function or some printing application (page 110).
• Stamping is performed in accordance with the date and time settings (page 129) 
and the display style settings (page 130).
Procedure
[MENU] * Set Up Tab * Adjust
When the date and time settings are what you want, press [SET] to apply them.
• You can specify a date from 2001 to 2049.
• Be sure to select your Home City (page 128) before setting the time and date. If 
you set the time and date while the wrong city is selected for your Home City, the 
times and dates of all of the World Time cities (page 128) will be wrong.
Time Stamping Snapshots (Timestamp)
Date2009/12/19
Date&Time2009/12/19 1:25pm
OffNo stamping of date and/or time
Setting the Camera’s Clock (Adjust)
[8] [2]Change the setting at the cursor location
[4] [6]Move the cursor between settings
[BS]Toggles between 12-hour and 24-hour format 
						

							130Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Date Style
You can select from among three different styles for the date.
Example: December 19, 2009
• This setting also affects the control panel date format as shown below (page 28).
YY/MM/DD or MM/DD/YY: MM/DD
DD/MM/YY: DD/MM
Procedure
[MENU] * Set Up Tab * Language
.Specify the display language you want.
1Select the tab on the right.
2Select “Language”.
3Select the language you want.
Specifying the Date Style (Date Style)
YY/MM/DD09/12/19
DD/MM/YY19/12/09
MM/DD/YY12/19/09
Specifying the Display Language (Language)
1
23