Casio EX FH100 User Manual

41Snapshot Tutorial
ISO sensitivity is a measure of sensitivity to light.
1.In the REC mode, press [SET].
2.Use [8] and [2] to select the second control panel option from the top 
(ISO Sensitivity).
3.Use [4] and [6] to select the setting you want and then press [SET].
• In the S (shutter speed priority) mode, ISO sensitivity always operates 
according to its “AUTO” setting. The ISO sensitivity setting cannot be changed 
while in the S mode.
• The current ISO sensitivity setting is used when shooting a...

42Snapshot Tutorial
You can adjust white balance to match the source of light available where you are 
shooting and avoid the blue cast that results when shooting outdoors when it is 
cloudy, and the green cast that results when shooting under fluorescent lighting.
1.In the REC mode, press [SET].
2.Use [8] and [2] to select the third control panel option from the top 
(White Balance).
3.Use [4] and [6] to select the shooting condition you want and then 
press [SET].
Adjusting White Balance (White...

43Snapshot Tutorial
• When “‡ Auto WB” is selected for the white balance setting, the camera 
automatically determines the white point of the subject. Certain subject colors 
and light source conditions can cause problems when the camera tries to 
determine the white point, which makes proper white balance adjustment 
impossible. If this happens, select the white balance setting that matches your 
shooting conditions (Daylight, Overcast, etc.).
You can manually adjust an image’s exposure value (EV value)...

44Snapshot Tutorial
1.In the REC mode, press [2] ( ) 
once.
2.Use [4] and [6] to select the flash 
setting you want and then press 
[SET].
3.Press the shutter button to shoot.
• For information about Flash Range, see page 199.
Using Flash (Flash)
 Auto FlashFlash fires automatically in accordance with exposure 
(amount of light and brightness) conditions.
 Flash OffFlash does not fire.
 Flash OnFlash always fires. This setting can be used to brighten a 
subject that normally comes out dark due to...

45Snapshot Tutorial
NOTE
• Take care so your fingers and the strap do not block the flash.
• The desired effect may not be obtained when the subject is too far away or too 
close.
• Flash charging time (page 199) depends on operating conditions (battery 
condition, ambient temperature, etc.).
• Shooting with flash turned off when lighting is dim results in a slow shutter speed, 
which can cause image blur due to camera movement. Under such conditions, 
secure the camera with a tripod, etc.
• With red eye...

46Snapshot Tutorial
1.In the REC mode, press [SET].
2.Use [8] and [2] to select the bottom control panel option (Date/Time).
You can use [4] and [6] to select date or time display.
NOTE
• You can select either of two display styles (page 165) for the date: Month/Day or 
Day/Month.
• The time is displayed using 24-hour format.
Your camera provides you with 10X optical zoom (that changes the lens focal 
distance), which can be used in combination with digital zoom (that digitally 
processes the center...

47Snapshot Tutorial
NOTE
• The higher the digital zoom factor, the coarser the recorded image. Note that the 
camera also has a function that lets you record using digital zoom without image 
deterioration (page 48).
• Use of a tripod is recommended to protect against image blur due to camera 
movement when shooting with telephoto.
• Performing a zoom operation changes the lens aperture.
• Digital zoom is disabled while “RAW+” is selected for the “Image Size” setting 
(page 37).
• Both optical zoom and...

48Snapshot Tutorial
• An image deterioration icon (Ù) will 
appear on the monitor screen at the 
point where image deterioration starts.
• The deterioration point depends on 
the current image size setting (page 
36). The smaller the image size 
setting, the higher the zoom factor you 
can use before reaching the image 
deterioration point.
• Though digital zoom generally causes 
a deterioration of image quality, some 
digital zoom without image 
deterioration is possible with image 
sizes of “7M” and...

49Snapshot Tutorial
The number of consecutive images you can shoot is theoretically unlimited, as long 
as there is memory available to store them. Also note that the maximum shooting 
speed of Normal Speed CS is limited by the type of memory card you are using and 
the camera setup.
1.Set the mode dial to t (Auto).
2.In the REC mode, press [MENU].
3.Use [4] and [6] to select the “REC” tab.
4.Use [8] and [2] to select “CS” and then press [6].
5.Use [8] and [2] to select “Normal Speed CS”, and then press...

50Snapshot Tutorial
IMPORTANT!
• For Normal Speed CS, adjustment of exposure, white balance, and Auto Focus is 
performed for each CS image when the came ra is configured with settings shown 
below.
• For Normal Speed CS, the ISO sensitivit y, exposure, and shutter speed values that 
appear on the monitor screen when you half-p ress the shutter button indicate the 
values for the first CS image. Values  for subsequent images are not displayed.
• You also can select a flash mode for No rmal Speed CS...