Casio EX FH100 User Manual

121Other Playback Functions (PLAY)
• To stop the slideshow, press [SET] or [MENU]. Pressing [MENU] stops the 
slideshow and returns to the menu screen.
• Adjust audio volume by pressing [2] and then press [8] or [2] during playback.
• All button operations are disabled while the slideshow is transitioning from one 
image to another.
• The time required for transition from one image to another may be longer in the 
case of an image that was not recorded with this camera.
Effect
Select the effect you...

122Other Playback Functions (PLAY)
You can replace the built-in slideshow background music with other music from your 
computer.
Supported File Types:
• PCM format (16-bit, monaural / stereo) WAV files
• Sampling Frequencies: 11.025 kHz/22.05 kHz/44.1 kHz
Number of Files: 9
File names: SSBGM001.WAV to SSBGM009.WAV
• Create the music files on your computer using the above names.
• Regardless of which effect pattern you select, the music files you store in camera 
memory are played back in name sequence....

123Other Playback Functions (PLAY)
4.Double-click the “SSBGM” folder you created and copy the 
background music file to it.
• See the user documentation that comes with your computer for information 
about moving, copying, and deleting files.
• If there are background music files both in built-in memory and on the memory 
card loaded in the camera, the files on the memory card take priority.
• See page 159 for information about camera folders.
5.Disconnect the camera from the computer (pages 145, 154)....

124Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Movie Screen of Movie to be Edited * [MENU] * 
PLAY Tab * Movie Editing
The Movie Editing feature lets you use one of the following procedures to edit out a 
specific part of a movie.
1.Use [8] and [2] to select the editing method you want to use and then 
press [SET].
2.Use the following operations to select the frame 
(point) from which or to which you want to cut 
the movie (the cut point).
Editing a Movie on the Camera (Movie Editing)
 Cut...

125Other Playback Functions (PLAY)
3.Press [2] to display the editing menu and specify one or two cut 
points.
4.Use [8] and [2] to select “Yes” and then press [SET].
The selected cut operation will take considerable time to complete. Don’t try to 
perform any camera operation until the “Busy... Please wait...” message 
disappears from the monitor screen. Note that a cut operation can take a long 
time if the movie being edited is long.
IMPORTANT!
• When you edit a movie, only the result is saved. The...

126Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * 
White Balance
You can use the white balance setting to select a light source type for a recorded 
image, which will affect the colors of the image.
NOTE
• You also can adjust the white balance when recording images (page 42).
• The original snapshot is retained in memory and not deleted.
• When you display an altered image on the camera’s monitor screen, the date and 
time indicates when the image was...

127Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * 
Brightness
You can select one of five brightness levels, from +2 (brightest) to –2 (least bright).
NOTE
• The original snapshot is retained in memory and not deleted.
• When you display an altered image on the camera’s monitor screen, the date and 
time indicates when the image was originally recorded, not when the image was 
altered.
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * 
DPOF...

128Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Protect
IMPORTANT!
• Note that even if a file is protected, it will be deleted if you perform the format 
operation (page 170).
NOTE
• Performing the above procedure while a CS group is displayed will protect all the 
images in the CS group. You can protect individual images in a CS group by 
performing the above procedure while the image is displayed.
.To protect a specific image in a CS group
1.While CS image playback is in...

129Other Playback Functions (PLAY)
3.Use [4] and [6] to scroll through images until one you want to protect 
is displayed.
4.Use [8] and [2] to select “On” and then press [SET].
This will protect the image and display the › icon.
• To unprotect an image, select “Off” in step 4 and then press [SET].
5.After you are finished, select “Cancel” and then press [SET] to exit this 
operation.
NOTE
• Note that even if a file is protected, it will be deleted if you perform the format 
operation (page 170).
.To...

130Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Rotation
1.Use [8] and [2] to select “Rotation” and then press [SET].
Each press of [SET] will rotate the displayed image 90 degrees left.
2.When the displayed image is at the orientation you want, press 
[MENU].
NOTE
• Rotating a CS image causes all of the images in the CS group to be rotated. You 
cannot rotate individual component image in a CS group.
• Rotation of movie images is not supported.
• Note that...