Casio EX F1 User Manual
Here you can view all the pages of manual Casio EX F1 User Manual. The Casio manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 31
31Snapshot Tutorial • The initial factory default image size setting is 6M (6 million pixels). • Selecting 3:2 (2816x1872 pixels) records images with an aspect ratio of 3:2, which matches the standard aspect ratio of print paper. • The letters “HDTV” stand for “High Defini tion Television”. An HDTV screen has an aspect ratio of 16:9, which makes them wider than the usual 4:3 aspect ratio of television screens of the past. Your camera can record images that are compatible with the aspect ratio an...
Page 32
32Snapshot Tutorial 3.Press the shutter button to shoot. • If the camera senses that flash is necessary, the flash unit will pop up automatically when you half-press or full-press the shutter button. • Note that the flash unit does not close automatically. After you are finished using it, you need to close it by hand. NOTE • Take care to ensure nothing is close to or in contact with the flash unit when it fires. Also make sure that the flash unit and the area around it is not dirty. Objects, dust,...
Page 33
33Snapshot Tutorial Red-eye Reduction Using the flash to shoot at night or in a dimly lit room can cause red spots inside the eyes of people who are in the image. This is caused when the light from the flash reflects off of the retina of the eye. When red-eye reduction is selected as the flash mode, an LED light will light immediately befor e the flash fires. This causes the irises in the eyes of any people in the image to become smaller, which reduces the chance of red eye. Note the following...
Page 34
![Page 34
34Snapshot Tutorial
ISO sensitivity is a measure of sensitivity to light.
1.In the REC mode, use [8] and [ 2] to select the third control panel
option from the top (ISO Sensitivity).
2.Use [ 4] and [ 6] to select the setting you want and then press [SET].
• “AUTO” ISO sensitivity always is appli ed for movies, regardless of the current
ISO sensitivity setting.
•“ S Image AS” (page 81) can be used onl y when the ISO sensitivity setting is
“AUTO”.
• An ISO setting of ISO 400 or greater is not...](http://img.usermanuals.tech/thumb/16/38205/w300_Casio_EX-F1-33.png "Page 34
34Snapshot Tutorial
ISO sensitivity is a measure of sensitivity to light.
1.In the REC mode, use [8] and [ 2] to select the third control panel
option from the top (ISO Sensitivity).
2.Use [ 4] and [ 6] to select the setting you want and then press [SET].
• “AUTO” ISO sensitivity always is appli ed for movies, regardless of the current
ISO sensitivity setting.
•“ S Image AS” (page 81) can be used onl y when the ISO sensitivity setting is
“AUTO”.
• An ISO setting of ISO 400 or greater is not...")
34Snapshot Tutorial ISO sensitivity is a measure of sensitivity to light. 1.In the REC mode, use [8] and [ 2] to select the third control panel option from the top (ISO Sensitivity). 2.Use [ 4] and [ 6] to select the setting you want and then press [SET]. • “AUTO” ISO sensitivity always is appli ed for movies, regardless of the current ISO sensitivity setting. •“ S Image AS” (page 81) can be used onl y when the ISO sensitivity setting is “AUTO”. • An ISO setting of ISO 400 or greater is not...
Page 35
![Page 35
35Snapshot Tutorial
2.Use [4] and [ 6] to select the shooting co ndition you want and then
press [SET].
• When “ ‡ Auto WB” is selected for the white balance setting, the camera
automatically determines the white point of the subject. Certain subject colors
and light source conditions can caus e problems when the camera tries to
determine the white point, which makes proper white balance adjustment
impossible. If this happens, select the wh ite balance setting that matches your
shooting...](http://img.usermanuals.tech/thumb/16/38205/w300_Casio_EX-F1-34.png "Page 35
35Snapshot Tutorial
2.Use [4] and [ 6] to select the shooting co ndition you want and then
press [SET].
• When “ ‡ Auto WB” is selected for the white balance setting, the camera
automatically determines the white point of the subject. Certain subject colors
and light source conditions can caus e problems when the camera tries to
determine the white point, which makes proper white balance adjustment
impossible. If this happens, select the wh ite balance setting that matches your
shooting...")
35Snapshot Tutorial 2.Use [4] and [ 6] to select the shooting co ndition you want and then press [SET]. • When “ ‡ Auto WB” is selected for the white balance setting, the camera automatically determines the white point of the subject. Certain subject colors and light source conditions can caus e problems when the camera tries to determine the white point, which makes proper white balance adjustment impossible. If this happens, select the wh ite balance setting that matches your shooting...
Page 36
![Page 36
36Snapshot Tutorial
You can manually adjust an image’s exposure value (EV value) before shooting it.
• Exposure Compensation Range: –2.0EV to +2.0EV
• Unit: 1/3EV
1.In the REC mode, use [ 8] and [ 2] to select the fifth control panel
option from the top (EV Shift).
2.Use [ 4] and [ 6] to adjust the exposu re compensation value.
To cancel exposure compensation, change
the EV value to 0.0.
3.Press [SET].
This applies the exposure compensation
value. The exposure compensation value
you set remains in...](http://img.usermanuals.tech/thumb/16/38205/w300_Casio_EX-F1-35.png "Page 36
36Snapshot Tutorial
You can manually adjust an image’s exposure value (EV value) before shooting it.
• Exposure Compensation Range: –2.0EV to +2.0EV
• Unit: 1/3EV
1.In the REC mode, use [ 8] and [ 2] to select the fifth control panel
option from the top (EV Shift).
2.Use [ 4] and [ 6] to adjust the exposu re compensation value.
To cancel exposure compensation, change
the EV value to 0.0.
3.Press [SET].
This applies the exposure compensation
value. The exposure compensation value
you set remains in...")
36Snapshot Tutorial You can manually adjust an image’s exposure value (EV value) before shooting it. • Exposure Compensation Range: –2.0EV to +2.0EV • Unit: 1/3EV 1.In the REC mode, use [ 8] and [ 2] to select the fifth control panel option from the top (EV Shift). 2.Use [ 4] and [ 6] to adjust the exposu re compensation value. To cancel exposure compensation, change the EV value to 0.0. 3.Press [SET]. This applies the exposure compensation value. The exposure compensation value you set remains in...
Page 37
![Page 37
37Snapshot Tutorial
The metering mode determines what part of the subject is metered for exposure.
1.In the REC mode, use [8] and [ 2] to select the sixth control panel
option from the top (Metering).
2.Use [ 4] and [ 6] to select the setting you want and then press [SET].
You can use the following procedure to change the Auto Focus metering area for
shooting snapshots.
• When recording movies, the AF metering area is always “
U Spot”.
1.In the REC mode, use [ 8] and [ 2] to select the third control...](http://img.usermanuals.tech/thumb/16/38205/w300_Casio_EX-F1-36.png "Page 37
37Snapshot Tutorial
The metering mode determines what part of the subject is metered for exposure.
1.In the REC mode, use [8] and [ 2] to select the sixth control panel
option from the top (Metering).
2.Use [ 4] and [ 6] to select the setting you want and then press [SET].
You can use the following procedure to change the Auto Focus metering area for
shooting snapshots.
• When recording movies, the AF metering area is always “
U Spot”.
1.In the REC mode, use [ 8] and [ 2] to select the third control...")
37Snapshot Tutorial The metering mode determines what part of the subject is metered for exposure. 1.In the REC mode, use [8] and [ 2] to select the sixth control panel option from the top (Metering). 2.Use [ 4] and [ 6] to select the setting you want and then press [SET]. You can use the following procedure to change the Auto Focus metering area for shooting snapshots. • When recording movies, the AF metering area is always “ U Spot”. 1.In the REC mode, use [ 8] and [ 2] to select the third control...
Page 38
![Page 38
38Snapshot Tutorial
2.Use [4] and [ 6] to select the setting you want and then press [SET].
•“O
Tracking” cannot be used in combination with the following features.
Prerecord (Still image), Slow Motion View, some BEST SHOT scenes (Move
Out CS, Move In CS, For YouTube, Prerecord (Movie))
•“ — Free” cannot be selected for the AF area while Face Detection is enabled.
Spot This mode takes readings of a small area in the center of the image.
This setting works well with focus lock (page 44).
FreeYou...](http://img.usermanuals.tech/thumb/16/38205/w300_Casio_EX-F1-37.png "Page 38
38Snapshot Tutorial
2.Use [4] and [ 6] to select the setting you want and then press [SET].
•“O
Tracking” cannot be used in combination with the following features.
Prerecord (Still image), Slow Motion View, some BEST SHOT scenes (Move
Out CS, Move In CS, For YouTube, Prerecord (Movie))
•“ — Free” cannot be selected for the AF area while Face Detection is enabled.
Spot This mode takes readings of a small area in the center of the image.
This setting works well with focus lock (page 44).
FreeYou...")
38Snapshot Tutorial 2.Use [4] and [ 6] to select the setting you want and then press [SET]. •“O Tracking” cannot be used in combination with the following features. Prerecord (Still image), Slow Motion View, some BEST SHOT scenes (Move Out CS, Move In CS, For YouTube, Prerecord (Movie)) •“ — Free” cannot be selected for the AF area while Face Detection is enabled. Spot This mode takes readings of a small area in the center of the image. This setting works well with focus lock (page 44). FreeYou...
Page 39
![Page 39
39Snapshot Tutorial
You can use the REC light for illumination when recording
a movie where lighting is dim. Turning on the REC light
causes the LED light to light and stay on.
1.In the REC mode, set the CS dial to t (Single
Shot).
2.Use [ 8] and [ 2] to select th e second control
panel option from the bottom (REC Light).
3.Use [ 4] and [ 6] to select “On” and then press [SET].
When “On” is selected, the LED light remains lit.
• The effectiveness of the REC light is reduced in the case of far away...](http://img.usermanuals.tech/thumb/16/38205/w300_Casio_EX-F1-38.png "Page 39
39Snapshot Tutorial
You can use the REC light for illumination when recording
a movie where lighting is dim. Turning on the REC light
causes the LED light to light and stay on.
1.In the REC mode, set the CS dial to t (Single
Shot).
2.Use [ 8] and [ 2] to select th e second control
panel option from the bottom (REC Light).
3.Use [ 4] and [ 6] to select “On” and then press [SET].
When “On” is selected, the LED light remains lit.
• The effectiveness of the REC light is reduced in the case of far away...")
39Snapshot Tutorial You can use the REC light for illumination when recording a movie where lighting is dim. Turning on the REC light causes the LED light to light and stay on. 1.In the REC mode, set the CS dial to t (Single Shot). 2.Use [ 8] and [ 2] to select th e second control panel option from the bottom (REC Light). 3.Use [ 4] and [ 6] to select “On” and then press [SET]. When “On” is selected, the LED light remains lit. • The effectiveness of the REC light is reduced in the case of far away...
Page 40
40Snapshot Tutorial Your camera provides you with 12X optical zoom (that changes the lens focal distance), which can be used in combinati on with digital zoom (that digitally processes the center portion of the image to enlarge it) for total zoom capabilities of 12X to 180.7X. The image deterioration point depends on the image size (page 42). 1.In the REC mode, slide the zoom controller to zoom. • Sliding the zoom controller as far as it wi ll go in either direction will zoom at high speed. 2.Press...