Casio Cassiopeia E 100 Palm-Size Pc Users Guide

Part 2 Communicating with a Computer73
¥ If your desktop computer is running Windows NT with a service pack, you will be
informed during the set up that you may need to reinstall the service pack. Try
connecting first. If you are not successful, reinstall the service pack.
Note
¥ Windows CE Services does not support data exchange or synchronization with a
handheld PC running Windows CE 1.0.
¥ Windows CE Services and H/PC Explorer (for Windows CE 1.0 Handheld PCs)
cannot be installed on the same...

Palm-size PC UserÕs Guide74
3. On the dialog that appears asking whether you want to restart your computer, click
Finish.
¥ The dialog shown below appears after your computer restarts.
¥ With some computers, you may not need to restart. In such a case, click Next to
display the dialog shown below.
4. Turn off your Palm-size PC and place it on its cradle. Make sure the Palm-size PC
seats securely onto the cradle.
Þ 

Part 2 Communicating with a Computer75
5. Turn on Palm-size PC power and click the Start button on your computerÕs screen.
¥ Windows CE Services automatically locates the port where Palm-size PC is
connected and configures the communications port.
¥ If you are running Windows NT on your desktop computer, you will need to enter
the user name and password you provided earlier in the installation procedure into
your Palm-size PC.
¥ If the message ÒCannot find Palm-size PCÓ appears, click Cancel to quit...

Palm-size PC UserÕs Guide76
7. Click Next, and the dialog shown below appears.
¥ Use this dialog to specify a synchronization method. Normally you can leave the
default Continuous setting as it is.
8. After you finish making the settings you want, click Next.
¥ Use this dialog to specify what data you want synchronized.
¥ Note that you later can change the settings you make in steps 7 and 8 using the
procedure under ÒChanging Communications SettingsÓ on page 79.
9. Click Finish.
¥ This starts a...

Part 2 Communicating with a Computer77
10. The Mobile Devices window shown below appears after synchronization is
complete.
¥ See ÒUsing the Mobile Devices WindowÓ on page 78 for more information about the
Mobile Devices window.
Note
You can set up partnership between your desktop computer and more than one
Windows CE device (Palm-size PCs running Windows CE 2.0 and handheld PCs). You
can also set up partnership between two desktop computers, such as your home
computer and work computer.
Optional...

Palm-size PC UserÕs Guide78
Using the Mobile Devices Window
To display the Mobile Devices Window, click the shortcut icon that is created
automatically during installation. You can also display it by clicking Start, pointing to
Programs, point to Microsoft Windows CE Services, and then clicking Mobile
Devices.
Icons show Palm-size PCs with which your desktop computer
has a partnership. The name of each icon is the name you give
the Palm-size PC during installation.
The Mobile Devices windows lets you do...

Part 2 Communicating with a Computer79
Changing Communications Settings
Use the procedure described here to make communications settings manually when
Windows CE Services cannot detect your Palm-size PC during installation or when
you want to set up for infrared synchronization. Note the following points before
changing communications settings.
¥ Verify that the correct communications port is selected on your desktop computer
and that it is free.
Windows CE Services uses the COM port specified by Windows...

Palm-size PC UserÕs Guide80
To change the baud rate setting of your Palm-size PC, tap Start, Settings, and then
Communications. On the dialog that appears, click the PC Connection tab, and then
select the baud rate setting you want.
Synchronization
Synchronizing between your Palm-size PC and desktop computer updates data so both
have the latest version. Note that you have to install Windows CE Services on your
desktop computer before you can perform synchronization.
Synchronization does the following....

Part 2 Communicating with a Computer81
¥ Double-click the Mobile Devices shortcut on your computerÕs desktop.
Double-click here.
Next, to actually start synchronization, click the Tools menu on the Mobile Devices
window and then click Synchronize Now. The progress of the synchronization is
indicated in the lower right of the Mobile Devices window.
Synchronization progress indication
Note
Depending on the volume of data that needs to be synchronized, synchronization can
take anywhere from one minute to a...

Palm-size PC UserÕs Guide82
Checking Synchronization Details
The message ÒPalm-size_PC: Connected, Up-to-date.Ó appears at the bottom of the
Mobile Devices window after synchronization is complete.
The actual message shows the name
of the Palm-size PC in place of the text
“Palm-size PC” shown here. Status bar
You can check the details of what was done during the synchronization operation by
clicking Tools and then ActiveSync Status.
ActiveSync Status Window
How Data is Synchronized
This section is an...