Canon Xeed Sx7 Mark Ii Medical Lcos X3 Users Manual
Here you can view all the pages of manual Canon Xeed Sx7 Mark Ii Medical Lcos X3 Users Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 111
![Page 111
111
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function
Setting Auto Setup Function
[Auto setup]
You can select an item you want to enable in the
auto setup function.
T
T
Select [On] or [Off] for the following items if you
want to enable or disable them in the auto setup
function, respectively.
Selecting the Power Management Mode
[Power management mode]
You can turn off the lamp or projector automati-
cally for saving power.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button....](http://img.usermanuals.tech/thumb/14/58678/w300_canon_xeed_sx7_mark_ii_medical_lcos_x3-users-manual-110.png "Page 111
111
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function
Setting Auto Setup Function
[Auto setup]
You can select an item you want to enable in the
auto setup function.
T
T
Select [On] or [Off] for the following items if you
want to enable or disable them in the auto setup
function, respectively.
Selecting the Power Management Mode
[Power management mode]
You can turn off the lamp or projector automati-
cally for saving power.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button....")
111 SETTING UP FUNCTIONS FROM MENUS Setting Various Function Setting Auto Setup Function [Auto setup] You can select an item you want to enable in the auto setup function. T T Select [On] or [Off] for the following items if you want to enable or disable them in the auto setup function, respectively. Selecting the Power Management Mode [Power management mode] You can turn off the lamp or projector automati- cally for saving power. T T Press the [OK] button to confirm, and then press the [MENU] button....
Page 112
![Page 112
112
SETTING UP FUNCTIONS FROM MENUS
Skip the POWER Button Operation
[Direct power on]
You can set the projector to be turned on when
you connect the power cord.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Enabling/Disabling the Beep
[Beep]
You can enable/disable the beep when you
press a button on the top control or remote con-
trol.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
System settings
Direct power on
Disables the direct power on func-
tion....](http://img.usermanuals.tech/thumb/14/58678/w300_canon_xeed_sx7_mark_ii_medical_lcos_x3-users-manual-111.png "Page 112
112
SETTING UP FUNCTIONS FROM MENUS
Skip the POWER Button Operation
[Direct power on]
You can set the projector to be turned on when
you connect the power cord.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Enabling/Disabling the Beep
[Beep]
You can enable/disable the beep when you
press a button on the top control or remote con-
trol.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
System settings
Direct power on
Disables the direct power on func-
tion....")
112 SETTING UP FUNCTIONS FROM MENUS Skip the POWER Button Operation [Direct power on] You can set the projector to be turned on when you connect the power cord. T T Press the [OK] button to confirm, and then press the [MENU] button. Enabling/Disabling the Beep [Beep] You can enable/disable the beep when you press a button on the top control or remote con- trol. T T Press the [OK] button to confirm, and then press the [MENU] button. System settings Direct power on Disables the direct power on func- tion....
Page 113
![Page 113
113
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function
Selecting a Display Language
[Language]
You can select a language to be used in the
menu from 20 different languages.
T
T
Press the [OK] button and all words in the menu
will be displayed in the selected language.
Press the [MENU] button when you finish.
System settings
Language
English
Germany
French
Italian
Spanish
Portuguese
Swedish
Russian
Dutch
Finnish
Norwegian
Tu r k i s h
Polish
Hungarian
Czech
Danish
DIGITAL PCANALOG PC
DIGITAL...](http://img.usermanuals.tech/thumb/14/58678/w300_canon_xeed_sx7_mark_ii_medical_lcos_x3-users-manual-112.png "Page 113
113
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function
Selecting a Display Language
[Language]
You can select a language to be used in the
menu from 20 different languages.
T
T
Press the [OK] button and all words in the menu
will be displayed in the selected language.
Press the [MENU] button when you finish.
System settings
Language
English
Germany
French
Italian
Spanish
Portuguese
Swedish
Russian
Dutch
Finnish
Norwegian
Tu r k i s h
Polish
Hungarian
Czech
Danish
DIGITAL PCANALOG PC
DIGITAL...")
113 SETTING UP FUNCTIONS FROM MENUS Setting Various Function Selecting a Display Language [Language] You can select a language to be used in the menu from 20 different languages. T T Press the [OK] button and all words in the menu will be displayed in the selected language. Press the [MENU] button when you finish. System settings Language English Germany French Italian Spanish Portuguese Swedish Russian Dutch Finnish Norwegian Tu r k i s h Polish Hungarian Czech Danish DIGITAL PCANALOG PC DIGITAL...
Page 114
![Page 114
114
SETTING UP FUNCTIONS FROM MENUS
Prohibiting the Projector Operation
[Key lock]
You can prohibit the use of the buttons on the
top control or remote control to prevent them
from being pressed by mistake.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Enabling/Disabling the Guide Message
[Guide]
You can enable/disable the guide message
showing how to use the projector.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
System settings
Key lock
Disables the...](http://img.usermanuals.tech/thumb/14/58678/w300_canon_xeed_sx7_mark_ii_medical_lcos_x3-users-manual-113.png "Page 114
114
SETTING UP FUNCTIONS FROM MENUS
Prohibiting the Projector Operation
[Key lock]
You can prohibit the use of the buttons on the
top control or remote control to prevent them
from being pressed by mistake.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Enabling/Disabling the Guide Message
[Guide]
You can enable/disable the guide message
showing how to use the projector.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
System settings
Key lock
Disables the...")
114 SETTING UP FUNCTIONS FROM MENUS Prohibiting the Projector Operation [Key lock] You can prohibit the use of the buttons on the top control or remote control to prevent them from being pressed by mistake. T T Press the [OK] button to confirm, and then press the [MENU] button. Enabling/Disabling the Guide Message [Guide] You can enable/disable the guide message showing how to use the projector. T T Press the [OK] button to confirm, and then press the [MENU] button. System settings Key lock Disables the...
Page 115
![Page 115
115
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function
Turning On/Off the LED Illumination
[LED illumination]
You can turn on/off the LED illumination lamp
and the LEDs on the terminals (P26, 27, 28).
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Setting up the Remote Control
[Remote control]
You can change the channel settings to prevent
the two remote controls from interfering with
each other when you use two projectors at the
same time.
T
T
T
Press the [OK] button to...](http://img.usermanuals.tech/thumb/14/58678/w300_canon_xeed_sx7_mark_ii_medical_lcos_x3-users-manual-114.png "Page 115
115
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function
Turning On/Off the LED Illumination
[LED illumination]
You can turn on/off the LED illumination lamp
and the LEDs on the terminals (P26, 27, 28).
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Setting up the Remote Control
[Remote control]
You can change the channel settings to prevent
the two remote controls from interfering with
each other when you use two projectors at the
same time.
T
T
T
Press the [OK] button to...")
115 SETTING UP FUNCTIONS FROM MENUS Setting Various Function Turning On/Off the LED Illumination [LED illumination] You can turn on/off the LED illumination lamp and the LEDs on the terminals (P26, 27, 28). T T Press the [OK] button to confirm, and then press the [MENU] button. Setting up the Remote Control [Remote control] You can change the channel settings to prevent the two remote controls from interfering with each other when you use two projectors at the same time. T T T Press the [OK] button to...
Page 116
![Page 116
116
SETTING UP FUNCTIONS FROM MENUS
Setting up the Digital Video Input Signal
[Digital video]
You can select the standard of the digital video
input signal.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Setting a Password
[Password settings]
You can set a password to the projector.
Once you set the password, you will need to
enter the password each time you turn on the
projector.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
System settings
Other...](http://img.usermanuals.tech/thumb/14/58678/w300_canon_xeed_sx7_mark_ii_medical_lcos_x3-users-manual-115.png "Page 116
116
SETTING UP FUNCTIONS FROM MENUS
Setting up the Digital Video Input Signal
[Digital video]
You can select the standard of the digital video
input signal.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Setting a Password
[Password settings]
You can set a password to the projector.
Once you set the password, you will need to
enter the password each time you turn on the
projector.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
System settings
Other...")
116 SETTING UP FUNCTIONS FROM MENUS Setting up the Digital Video Input Signal [Digital video] You can select the standard of the digital video input signal. T T T Press the [OK] button to confirm, and then press the [MENU] button. Setting a Password [Password settings] You can set a password to the projector. Once you set the password, you will need to enter the password each time you turn on the projector. T T T Press the [OK] button to confirm, and then press the [MENU] button. System settings Other...
Page 117
![Page 117
117
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function
Registering a Password
[Register password]
You can register a password that you need to
enter when turning on the projector.
T
T
T
Press the [OK] button to display the password
entry screen.
Enter a 4-digit password from the left. You can
enter a value 1, 2, 3, and 4 by pressing [ ], [ ],
[], respectively. Once you enter a
value for all four digits, the password is regis-
tered automatically.
Resetting to the Default Setting
[Factory defaults]...](http://img.usermanuals.tech/thumb/14/58678/w300_canon_xeed_sx7_mark_ii_medical_lcos_x3-users-manual-116.png "Page 117
117
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function
Registering a Password
[Register password]
You can register a password that you need to
enter when turning on the projector.
T
T
T
Press the [OK] button to display the password
entry screen.
Enter a 4-digit password from the left. You can
enter a value 1, 2, 3, and 4 by pressing [ ], [ ],
[], respectively. Once you enter a
value for all four digits, the password is regis-
tered automatically.
Resetting to the Default Setting
[Factory defaults]...")
117 SETTING UP FUNCTIONS FROM MENUS Setting Various Function Registering a Password [Register password] You can register a password that you need to enter when turning on the projector. T T T Press the [OK] button to display the password entry screen. Enter a 4-digit password from the left. You can enter a value 1, 2, 3, and 4 by pressing [ ], [ ], [], respectively. Once you enter a value for all four digits, the password is regis- tered automatically. Resetting to the Default Setting [Factory defaults]...
Page 118
![Page 118
118
SETTING UP FUNCTIONS FROM MENUS
Resetting the Lamp Counter
[Lamp counter]
You can reset the lamp counter that indicates the
timing to replace the projector when you replace
it.
T
T
T
Display Examples of Lamp Counter
zIf the time of use is:
SX7 MarkII : 1800 hours or less
SX60 : 2300 hours or less
zIf the time of use is:
SX7 MarkII : 1800 to 2000 hours
SX60 : 2400 to 2500 hourszIf the time of use is:
SX7 MarkII : 2000 hours or more
SX60 : 2500 hours or more
zIf you replace the lamp
Press the [OK]...](http://img.usermanuals.tech/thumb/14/58678/w300_canon_xeed_sx7_mark_ii_medical_lcos_x3-users-manual-117.png "Page 118
118
SETTING UP FUNCTIONS FROM MENUS
Resetting the Lamp Counter
[Lamp counter]
You can reset the lamp counter that indicates the
timing to replace the projector when you replace
it.
T
T
T
Display Examples of Lamp Counter
zIf the time of use is:
SX7 MarkII : 1800 hours or less
SX60 : 2300 hours or less
zIf the time of use is:
SX7 MarkII : 1800 to 2000 hours
SX60 : 2400 to 2500 hourszIf the time of use is:
SX7 MarkII : 2000 hours or more
SX60 : 2500 hours or more
zIf you replace the lamp
Press the [OK]...")
118 SETTING UP FUNCTIONS FROM MENUS Resetting the Lamp Counter [Lamp counter] You can reset the lamp counter that indicates the timing to replace the projector when you replace it. T T T Display Examples of Lamp Counter zIf the time of use is: SX7 MarkII : 1800 hours or less SX60 : 2300 hours or less zIf the time of use is: SX7 MarkII : 1800 to 2000 hours SX60 : 2400 to 2500 hourszIf the time of use is: SX7 MarkII : 2000 hours or more SX60 : 2500 hours or more zIf you replace the lamp Press the [OK]...
Page 119
Table of contents/Safety Instructions Before Use Setting Up the Projector Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index MAINTENANCE
Page 120
120 MAINTENANCE Maintenance Cleaning the Projector Clean the projector frequently to prevent dust from settling on the surface. A dirty lens may ruin the quality of the projected image. Wipe the projectors main unit softly with a soft cloth. If the projector is heavily soiled, soak the cloth in water with a small amount of detergent in it, squeeze the cloth very well, and then wipe the projector with it. After cleaning, wipe the projector with a dry cloth. Caution zThe main unit is very hot immediately...