Canon X600 Projector User Manual
Have a look at the manual Canon X600 Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 96
96
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function with the System
Settings Menu
Setting Auto Setup Function
[Auto setup]
You can select an item you want to enable in the
auto setup function.
T
T
Select [On] or [Off] for the following items if you
want to enable or disable them in the auto setup
function, respectively.
Selecting the Power Management Mode
[Power management mode]
You can turn off the lamp or projector automati-
cally for saving power.
T
T
Press the [OK] button to confirm, and...](http://img.usermanuals.tech/thumb/14/98811/w64_projector_manual_3208_d-95.png "Page 96
96
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function with the System
Settings Menu
Setting Auto Setup Function
[Auto setup]
You can select an item you want to enable in the
auto setup function.
T
T
Select [On] or [Off] for the following items if you
want to enable or disable them in the auto setup
function, respectively.
Selecting the Power Management Mode
[Power management mode]
You can turn off the lamp or projector automati-
cally for saving power.
T
T
Press the [OK] button to confirm, and...")
![Page 97
97
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function with the System Settings Menu
Skip the POWER Button Operation
[Direct power on]
You can set the projector to be turned on when
you connect the power cord.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Enabling/Disabling the Beep
[Beep]
You can enable/disable the beep when you
press a button on the top control or remote con-
trol.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
System settings...](http://img.usermanuals.tech/thumb/14/98811/w64_projector_manual_3208_d-96.png "Page 97
97
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function with the System Settings Menu
Skip the POWER Button Operation
[Direct power on]
You can set the projector to be turned on when
you connect the power cord.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Enabling/Disabling the Beep
[Beep]
You can enable/disable the beep when you
press a button on the top control or remote con-
trol.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
System settings...")
![Page 98
98
SETTING UP FUNCTIONS FROM MENUS
Prohibiting the Projector Operation
[Key lock]
You can prohibit the use of the buttons on the
top control or remote control to prevent them
from being pressed by mistake.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Selecting a Display Language
[Language]
You can select a language to be used in the
menu from 20 different languages.
T
T
System settings
Key lock
Disables the key lock function.
Prohibits the use of the top control.
Prohibits the...](http://img.usermanuals.tech/thumb/14/98811/w64_projector_manual_3208_d-97.png "Page 98
98
SETTING UP FUNCTIONS FROM MENUS
Prohibiting the Projector Operation
[Key lock]
You can prohibit the use of the buttons on the
top control or remote control to prevent them
from being pressed by mistake.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Selecting a Display Language
[Language]
You can select a language to be used in the
menu from 20 different languages.
T
T
System settings
Key lock
Disables the key lock function.
Prohibits the use of the top control.
Prohibits the...")
![Page 99
99
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function with the System Settings Menu
Press the [OK] button and all words in the menu
will be displayed in the selected language.
Press the [MENU] button when you finish.
Enabling/Disabling the Guide Message
[Guide]
You can enable/disable the guide message
showing how to use the projector.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
System settings
Guide
Disables the guide message.
Enables the guide message.
zThe guide...](http://img.usermanuals.tech/thumb/14/98811/w64_projector_manual_3208_d-98.png "Page 99
99
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function with the System Settings Menu
Press the [OK] button and all words in the menu
will be displayed in the selected language.
Press the [MENU] button when you finish.
Enabling/Disabling the Guide Message
[Guide]
You can enable/disable the guide message
showing how to use the projector.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
System settings
Guide
Disables the guide message.
Enables the guide message.
zThe guide...")
![Page 100
100
SETTING UP FUNCTIONS FROM MENUS
Turning On/Off the LED Illumination
[LED illumination]
You can turn on/off the LED illumination lamp
and the LEDs on the terminals (P24, 25).
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Setting up the Remote Control
[Remote control]
You can change the channel settings to prevent
the two remote controls from interfering with
each other when you use two projectors at the
same time.
T
T
T
Press the [OK] button to confirm, and then press
the...](http://img.usermanuals.tech/thumb/14/98811/w64_projector_manual_3208_d-99.png "Page 100
100
SETTING UP FUNCTIONS FROM MENUS
Turning On/Off the LED Illumination
[LED illumination]
You can turn on/off the LED illumination lamp
and the LEDs on the terminals (P24, 25).
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Setting up the Remote Control
[Remote control]
You can change the channel settings to prevent
the two remote controls from interfering with
each other when you use two projectors at the
same time.
T
T
T
Press the [OK] button to confirm, and then press
the...")
![Page 101
101
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function with the System Settings Menu
Setting up the Digital Video Input Signal
[Digital video]
You can select the standard of the digital video
input signal.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Setting a Password
[Password settings]
You can set a password to the projector.
Once you set the password, you will need to
enter the password each time you turn on the
projector.
T
T
T
Press the [OK] button to confirm,...](http://img.usermanuals.tech/thumb/14/98811/w64_projector_manual_3208_d-100.png "Page 101
101
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function with the System Settings Menu
Setting up the Digital Video Input Signal
[Digital video]
You can select the standard of the digital video
input signal.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Setting a Password
[Password settings]
You can set a password to the projector.
Once you set the password, you will need to
enter the password each time you turn on the
projector.
T
T
T
Press the [OK] button to confirm,...")
![Page 102
102
SETTING UP FUNCTIONS FROM MENUS
Registering a Password
[Register password]
You can register a password that you need to
enter when turning on the projector.
T
T
T
Press the [OK] button to display the password
entry screen.
Enter a 4-digit password from the left. You can
enter a value 1, 2, 3, and 4 by pressing [ ], [ ],
[], respectively. Once you enter a
value for all four digits, the password is regis-
tered automatically.
Resetting the Lamp Counter
[Lamp counter]
You can reset the lamp counter that...](http://img.usermanuals.tech/thumb/14/98811/w64_projector_manual_3208_d-101.png "Page 102
102
SETTING UP FUNCTIONS FROM MENUS
Registering a Password
[Register password]
You can register a password that you need to
enter when turning on the projector.
T
T
T
Press the [OK] button to display the password
entry screen.
Enter a 4-digit password from the left. You can
enter a value 1, 2, 3, and 4 by pressing [ ], [ ],
[], respectively. Once you enter a
value for all four digits, the password is regis-
tered automatically.
Resetting the Lamp Counter
[Lamp counter]
You can reset the lamp counter that...")
![Page 103
103
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function with the System Settings Menu
Press the [OK] button to confirm, and then press
the [MENU] button.
Resetting to the Factory Defaults
[Factory defaults]
You can reset the menu item settings and restore
the system settings to the factory defaults.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
zDo not reset the lamp counter except
when you have replaced the lamp.
Otherwise, the lamp counter cannot
indicate the correct...](http://img.usermanuals.tech/thumb/14/98811/w64_projector_manual_3208_d-102.png "Page 103
103
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function with the System Settings Menu
Press the [OK] button to confirm, and then press
the [MENU] button.
Resetting to the Factory Defaults
[Factory defaults]
You can reset the menu item settings and restore
the system settings to the factory defaults.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
zDo not reset the lamp counter except
when you have replaced the lamp.
Otherwise, the lamp counter cannot
indicate the correct...")
101 SETTING UP FUNCTIONS FROM MENUS Setting Various Function with the System Settings Menu Setting up the Digital Video Input Signal [Digital video] You can select the standard of the digital video input signal. T T T Press the [OK] button to confirm, and then press the [MENU] button. Setting a Password [Password settings] You can set a password to the projector. Once you set the password, you will need to enter the password each time you turn on the projector. T T T Press the [OK] button to confirm, and then press the [MENU] button. System settings Other settings Digital video Projects a full range digital signal. Projects a limited range digital sig- nal. zRefer to the Users Manual that came with the AV equipment for more detailed information on settings. DIGITAL VIDEO F L System settings Other settings Password settings Disables the password protection. Enable the password protection. zOnce you set a password, the pass- word entry screen appears at power- on. Enter a 4-digit password with [ ], [ ], []. If the password is valid, projection starts. If you enter a wrong password three times, the pro- jector will be turned off. zTo cancel the password, remove the power plug from the AC outlet after the projection, and then insert the power plug while holding down the [MENU] button until the projector beeps. DIGITAL PCANALOG PC DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO Off On < < Projector_E.book Page 101 Thursday, April 20, 2006 7:11 PM
102 SETTING UP FUNCTIONS FROM MENUS Registering a Password [Register password] You can register a password that you need to enter when turning on the projector. T T T Press the [OK] button to display the password entry screen. Enter a 4-digit password from the left. You can enter a value 1, 2, 3, and 4 by pressing [ ], [ ], [], respectively. Once you enter a value for all four digits, the password is regis- tered automatically. Resetting the Lamp Counter [Lamp counter] You can reset the lamp counter that indicates the timing to replace the projector when you replace it. T T T zIf the time of use is less than 1,000 hours (1,840 hours for SX60) zIf the time of use is 1,000 to 1,400 hours (1,840 to 2,500 hours for SX60) zIf the time of use is 1,400 hours or longer (2,500 hours or longer for SX60) zIf you replace the lamp System settings Other settings Register password zPress the [MENU] button without entering a password if you want to cancel registering the password. DIGITAL PCANALOG PC DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO
103 SETTING UP FUNCTIONS FROM MENUS Setting Various Function with the System Settings Menu Press the [OK] button to confirm, and then press the [MENU] button. Resetting to the Factory Defaults [Factory defaults] You can reset the menu item settings and restore the system settings to the factory defaults. T T T Press the [OK] button to confirm, and then press the [MENU] button. zDo not reset the lamp counter except when you have replaced the lamp. Otherwise, the lamp counter cannot indicate the correct timing for replac- ing the lamp. zSee P108 for more detailed informa- tion on replacing the lamp. System settings Other settings Factory defaults Resets the projectors menu item settings. Cancels resetting the menu item settings. zThe settings of [Lamp counter], [Language] and [Remote control] will not be reset even after resetting to the factory defaults. zFor the factory defaults, see P128, 129. DIGITAL PCANALOG PC DIGITAL VIDEOCOMP./SCARTVIDEO/S-VIDEO OK Cancel Projector_E.book Page 103 Thursday, April 20, 2006 7:11 PM
Projector_E.book Page 104 Thursday, April 20, 2006 7:11 PM
Safety Instructions Before Use Setting Up the Projector Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index MAINTENANCE Projector_E.book Page 105 Thursday, April 20, 2006 7:11 PM
106 MAINTENANCE Maintenance Cleaning the Projector Clean the projector frequently to prevent dust from settling on the surface. A dirty lens may ruin the quality of the projected image. Wipe the projectors main unit softly with a soft cloth. If the projector is heavily soiled, soak the cloth in water with a small amount of detergent in it, squeeze the cloth very well, and then wipe the projector with it. After cleaning, wipe the projector with a dry cloth. Caution zThe main unit is very hot immediately after turning off the projector. Wait until the pro- jector cools down sufficiently before cleaning the projector. Otherwise, you may get burned or injured. zBefore cleaning the projector, be sure to remove the power plug from the AC outlet. Otherwise, electric shock or fire may result. Caution zNever use volatile cleaning liquid or benzine, as these may damage the finish of the projector. When using a chemical dust cloth, make sure to read the instructions thor- oughly. zWhen cleaning the projectors lens, use a commonly available air blower or lens cleaning paper. The lens surface is easily damaged, so do not use a hard cloth or tis- sues. When Not Used for an Extended Period of Time Be sure to attach the lens cap on the lens and store in the supplied carrying bag. Projector_E.book Page 106 Thursday, April 20, 2006 7:11 PM
107 MAINTENANCE Cleaning and Replacing the Air Filter An air filter is installed in the air intake vent on the bottom of the main body to protect the internal lens and mirror from dust. Should the air filter become clogged with dust, the pro- jector may be damaged since it will block the air flow into the projector and raises the inter- nal temperature of the projector. Cleaning the Air Filter Turn the projector upside down, remove the cover by pushing the latch, remove the air fil- ter, and clean it with a vacuum cleaner. When cleaning dust off the side exhaust vent and the bottom air intake vent, bring the vac- uum cleaner nozzle close to them directly. Replacing the Air Filter 1Turn off the projector, remove the power plug from the AC outlet, and let the pro- jector stand for at least 1 hour. 2Remove the filter cover by pushing the position of the arrow. 3Remove the air filter. 4Install a new air filter. 5Install the filter cover securely without any space. Caution zThe main unit is very hot immediately after turning off the projector. Wait until the pro- jector cools down sufficiently before cleaning the projector. Otherwise, you may get burned or injured. zBefore cleaning or replacing the air filter, be sure to remove the power plug from the AC outlet. Otherwise, electric shock or fire may result. zDo not insert any object into the projector through the air filter opening. You may suffer electric shock or injury due to the high-voltage parts or rotating parts. zClean the air filter frequently. zAfter cleaning the air filter, install it by following the removal steps in reverse. zAttach the lens cap when replacing the air filter. zHandle the air filter carefully. If damaged, the air filter will not work appropriately. zReplace the air filter whenever you replace the lamp. zAn air filter can be ordered from your dealer. Filter cover Air filter Push Projector_E.book Page 107 Thursday, April 20, 2006 7:11 PM
108 MAINTENANCE Replacing the Lamp When the time of use of the lamp exceeds 1,400 hours (2,300 hours for SX60), the following message (two types) is displayed for 10 seconds each time the projector is turned on. zWhen the time of use is 1,400 to 1,500 hours: (2,300 to 2,500 hours for SX60) zWhen the time of use is 1,500 hours or longer: (2,500 hours for SX60) Replacing Lamp This projector uses the following lamp. Lamp type No. SX6/X600: RS-LP02 SX60: RS-LP03 zThis message will not be displayed again if you select [No] in response to the message Do you want to display this message again?. zYou can check the time of use of the lamp in [Lamp counter] in the [System settings] menu (P102). Caution zWhen replacing the lamp, turn off the projector, wait until the cooling fan stops, remove the power plug from the AC outlet, and let the projector stand for at least 1 hour. Otherwise, you may get burned because the main unit is very hot immediately after the projector is turned off. zDo not touch the inner glass surface when you replace the lamp. Otherwise, the pro- jectors performance may degrade. zMake sure to handle the lamp carefully and correctly since it may explode if it is scratched or shocked. zDo not remove screws unless specified. zBe sure to use the specified lamp. zA lamp can be ordered from your dealer or Canon home page. * [], the [OK] button, and the [POWER] button are available during this message is displayed. * The [POWER] button is available during this message is displayed. Projector_E.book Page 108 Thursday, April 20, 2006 7:11 PM
109 MAINTENANCE Replacing the Lamp 1Turn off the projector, disconnect the power plug from the AC outlet, and then let the pro- jector stand for at least 1 hour. 2Loosen a screw with a flathead screwdriver and remove the lamp cover. 3Loosen two screws, pull up the handle, and then remove the lamp. 4Fully insert a new lamp and secure it with two screws. * After the installation, be sure to push down the handle. 5Replace the lamp cover and tighten the screw. 6Turn on the projector. 7Bring up the menu and select [System set- tings] -> [Other settings] -> [Lamp counter] (P102). 8Select [Reset] -> [OK] to reset the lamp counter. Lamp cover Screw Screw LampHandle Lamp cover Projector_E.book Page 109 Thursday, April 20, 2006 7:11 PM
Projector_E.book Page 110 Thursday, April 20, 2006 7:11 PM