Canon Selphy Es40 User Guide

							


4
Choose the size and placement of the image.
Pressing the - button will make the image 
larger. Pressing the 0 button will make it 
smaller.
Press the udl r buttons to move the image.
Press the m(DISPLAY) button, or turn the w 
wheel to rotate the image 90 degrees.
Press the o button to accept the setting.




5
Print.
Press the ., buttons to choose the number 
of copies.
Press the p button to start printing.


With the exception of [Correct Red-Eye] (p. 34), [Image Optimize] (p. 34), [Adjust Image] (p. 34), and [My Colors] (p. 35), settings made in “Printing a Variety of Images” will not be applied.Changing the settings in [My Colors] (p. 35) will change the color settings on the image but will not affect the frame.Images with a resolution below 640 x 480 or a width-to-height ratio greater than 2:1 cannot be printed with frames.When a cartridge is replaced mid-way through printing, automatic adjustments (trimming frames, image placement, etc.) will be made depending on the paper size of the new cartridge. However, if settings incompatible with the new cartridge have been selected, the printer will restore the [Creative Print] screen.You can add frames to SELPHY using the supplied software (p. 56, pp. 62-64).






C
O
P
Y  
						

							


You can decorate your images with up to 30 
stamps. Choose from 10 different designs and 
print (p. 81).
When using the gold or silver cartridges, you 
can decorate your images with up to 30 stamps. 
Choose from 4 different gold or silver designs 
(p. 81).
When using a black and white cartridge, stamps 
can not be printed.



Printing with Clip Art
1
Display the clip art screen.
Press the c button.
Press the udl r buttons, or turn the w 
wheel to choose a  (stamp), then press the 
o button.


2
Choose an image.
Press the l r buttons, or turn the w wheel to 
choose an image, then press the o button.
You can use the trimming function (p. 36) or 
search images using the jump function (p. 27) 
by pressing the m(EDIT) button and displaying 
the edit menu.


3
 
Choose stamps.
Press the udl r buttons, or turn the w 
wheel to choose a stamp, then press the o 
button.
Only gold or silver printing compatible stamps 
are displayed when using a gold or silver print 
cartridge.



C
O
P
Y  
						

							


4
Choose where to place the stamps.
Press the udl r buttons to move the stamp.
Depending on the stamp, press the m(DISPLAY) 
button, or turn the w wheel to rotate the stamp 
90 degrees.
Press the o button to place the stamp.



5
Choose whether or not to add another stamp.
To add a stamp, press the l r buttons, or turn 
the w wheel to choose [Yes], then press the 
o button. Repeat Steps 3 to 5.
To print without adding more stamps, press the 
l r buttons or turn the w wheel to choose 
[No] and press the o button. Then proceed to 
Step 6.


6
Print.
Press the ., buttons to choose the number of 
copies to be printed.
Press the p button to start printing.


With the exception of [Correct Red-Eye] (p. 34), [Image Optimize] (p. 34), [Adjust Image] (p. 34), and [My Colors] (p. 35), settings made in “Printing a Variety of Images” will not be applied.Changing the settings in [My Colors] (p. 35) will change the color settings on the image but will not affect the stamps.Images with a pixel resolution below 640×480 or an aspect ratio greater than 2:1 cannot be printed with stamps.When a cartridge is replaced mid-way through printing, automatic adjustments (the printed area of the image, the placement of the stamps, etc.) will be made depending on the paper size of the new cartridge. However, if settings incompatible with the new cartridge have been selected, the printer will restore the [Creative Print] screen.In Step 4, pressing the b(BACK) button and then the o button will clear all clip art.You can add clip art to SELPHY using the supplied software (pp. 56, 62-64).






C
O
P
Y  
						

							


You can turn your photo into a calendar (12 
different designs, 10 designs when using a card 
size cartridge).
When a black and white, gold, or silver cartridge 
is installed, calendars cannot be printed.


Printing Calendars
1
Display the calendar screen.
Press the c button.
Press the udl r buttons, or turn the w 
wheel to choose a  (calender), then press the 
o button.


2
Choose a layout.
Press the udl r buttons, or turn the w 
wheel to choose a layout, then press the o 
button.

3
Choose a background color.
Press the  udl r buttons or turn the w 
wheel to choose a color, then press the o 
button.

4
Set the year, month, the starting day of 
the week, and highlight holidays.
Press the ud buttons to choose an item, then 
press the l r buttons, or turn the w wheel to 
change the settings.
Press the o button.



C
O
P
Y  
						

							


5
Choose whether or not to add holidays.
To add holidays, press the l r buttons, or turn 
the w wheel to choose [Yes], and press the 
o button.
If you do not wish to add holidays, press the 
l r buttons, or turn the w wheel to choose 
[Next], and press the o button. Skip to Step 7.


6
Add holidays.
Press the udl r buttons, or turn the w wheel 
to choose a date, then press the o button.
The selected date will turn red.
Pressing the o button again will clear the 
selection.
When you are finished, press the b(BACK) button.
The screen in Step 5 will be restored. Press the 
l r buttons, or turn the w wheel to choose 
[Next], and press the o button.





7
Choose an image.
Press the l r buttons, or turn the w wheel to 
choose an image, then press the o button.
You can use the trimming function (p. 36) or 
search images using the jump function (p. 27) by 
pressing the m(EDIT) button and displaying the 
edit menu.


8
Review image and print.
Press the ., buttons to choose a number of 
copies.
Press the p button to start printing.


With the exception of [Correct Red-Eye] (p. 34), [Image Optimize] (p. 34), [Adjust Image] (p. 34), and [My Colors] (p. 35), settings made in “Printing a Variety of Images” will not be applied.Changing the settings in [My Colors] (p. 35) will change the color settings on the image but will not affect the calender.Images with a resolution lower than 640 x 480 cannot be printed as calendars.When a cartridge is replaced mid-way through printing, automatic adjustments (trimming frames, image placement, etc.) will be made depending on the paper size of the new cartridge. However, if settings incompatible with the new cartridge have been selected, the printer will restore the [Creative Print] screen.




C
O
P
Y  
						

							


Make your photos tell a story by turning them 
into a photo diary (6 different layout designs).
When a black and white, gold, or silver cartridge 
is installed, multi layouts cannot be printed.
As an example, this section will explain how to 
print a layout with two images.



Printing using Multi Layouts
1
Display the multi layout print screen.
Press the c button.
Press the udl r buttons, or turn the w 
wheel to choose a  (Multi Layout), then press 
the o button.


2
Choose a layout.
Press the udl r buttons, or turn the w 
wheel to choose a layout, then press the o 
button.

3
Choose a background color.
Press the udl r buttons or turn the w 
wheel to choose a color, then press the o 
button.


C
O
P
Y  
						

							


4
Choose an image.
Press the l r buttons, or turn the w wheel 
to choose the image to be printed in the area 
marked [1] and press the o button.
You can use the trimming function (p. 36) or 
search images using the jump function (p. 27) by 
pressing the m(EDIT) button and displaying the 
edit menu.
Use the same steps to choose an image to be 
printed in the area marked [2] and press the o 
button.



5
Confirm the images and print.
Press the ., buttons to choose the number of 
copies to be printed.
Press the p button to start printing.


With the exception of [Correct Red-Eye] (p. 34), [Image Optimize] (p. 34), [Adjust Image] (p. 34), and [My Colors] (p. 35), settings made in “Printing a Variety of Images” will not be applied.In layouts with more than 2 images, [Correct Red-Eye] (p. 34) settings made in “Printing a Variety of Images” will not be applied.Changing the settings in [My Colors] (p. 35) will change the color settings on the image but will not affect the background color.Images with a resolution lower than 640×480 cannot be printed in multi layout.When a cartridge is replaced mid-way through printing, automatic adjustments (trimming frames, image placement, etc.) will be made depending on the paper size of the new cartridge. However, if settings incompatible with the new cartridge have been selected, the printer will restore the [Creative Print] screen.





C
O
P
Y  
						

							


You can make your images more fun by printing 
with speech bubbles (6 different types).
When a black and white, gold, or silver cartridge 
is installed, speech bubbles cannot be printed.


Printing with Speech Bubbles
1
Display the speech bubble screen.
Press the c button.
Press the udl r buttons, or turn the w 
wheel to choose a  (Speech Bubble), then 
press the o button.


2
Choose an image.
Press the l r buttons, or turn the w wheel to 
choose an image, then press the o button.
You can use the trimming function (p. 36) or 
search images using the jump function (p. 27) 
by pressing the m(EDIT) button and displaying 
the edit menu.


3
Choose a speech bubble.
Press the udl r buttons, or turn the w 
wheel to choose a Speech Bubble, then press 
the o button.

4
Choose a color for the speech bubble.
Press the udl r buttons or turn the w 
wheel to choose a color, then press the o 
button.


C
O
P
Y  
						

							


5
Choose where to place the speech 
bubble.
Press the udl r buttons to move the speech 
bubble.
Depending on the speech bubble, press the 
m(DISPLAY) button or turn the w wheel to rotate 
the speech bubble or move its position.
Press the o button to place the speech 
bubble.



6
Print.
Press the ., buttons to choose the number of 
copies to be printed.
Press the p button to start printing.


With the exception of [Borders] (p. 32), [Correct Red-Eye] (p. 34), [Image Optimize] (p. 34), [Adjust Image] (p. 34), and [My Colors] (p. 35), settings made in “Printing a Variety of Images” will not be applied.Changing the settings in [My Colors] (p. 35) will change the color settings on the image but will not affect the color of the speech bubbles.Images with a resolution lower than 640×480 cannot be printed with speech bubbles.When a cartridge is replaced mid-way through printing, automatic adjustments (the printed area of the image, the placement of the speech bubble, etc.) will be made depending on the paper size of the new cartridge. However, if settings incompatible with the new cartridge have been selected, the printer will restore the [Creative Print] screen.




C
O
P
Y  
						

							
0

You can add flair to your photos by printing with 
image effects (8 different types).
When a gold or silver cartridge is installed, 
images cannot be printed with image effects.


Printing with Image Effects
1
Display the image effects screen.
Press the c button.
Press the udl r buttons, or turn the w 
wheel to choose a  (image effect), then press 
the o button.


2
Choose an image effect.
Press the l r buttons, or turn the w wheel 
to choose an image effect, then press the o 
button.

Image EffectExplanation of Effect
[Faded Edges]Keeps the center of the image clear while gently fading out 
the edges.
[Soft Edges]Keeps the center of the image in focus while gently blurring 
the edges.
[Soft Focus]Softens the focus of the entire image.
[Star Lights]Turns the bright points of light in the image into stars for a 
sparkling effect.
[Modern Bright]Creates a soft white haze on the image.
[Pinhole Camera]Creates a high contrast image with darkened edges such as 
those taken with a pinhole camera.
[Nostalgic]Creates the look of an old, color-faded photo.
[Smooth Skin]Makes skin look smooth and beautiful.

C
O
P
Y