Canon Selphy Es2 User Guide
Have a look at the manual Canon Selphy Es2 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Preparing/Replacing the Cartridge 21Getting Started Storing Cartridges • When storing cartridges, return the cartridge to its original package.
22Getting Started Placing/Connecting the Printer Set up and connect your SELPHY printer in the following manner for safe use. 1Place the printer on a flat surface. 2Connect the supplied power cord to the supplied compact power adapter. 3Insert the plug into a power outlet. 4Connect the compact power adapter to the printer. • Do not place the equipment on an unstable or tilted surface.There is risk that the equipment may fall and cause injury. • Do not block the air vents on the back of the printer. • The SELPHY ES2 can also be used with the separately sold battery pack NB-ES1L (p. 73). To power outlet 15 cm (6 in.) 10 cm (4 in.)15 cm (6 in.) Leave more than 15 cm (6 in.) of clearance at the front and back of the equipment and 10 cm (4 in.) of clearance on both sides.
23Getting Started Printing Precaution These cautions apply to printing images from memory cards, cameras and computers, and wireless printing. z Do not eject the cartridge or open the cartridge cover right after turning the power on or while printing. It may result in equipment damage. z During the printing operation, paper is temporarily output from the printer. Do not touch the paper until printing ends. This could impede pr inting, or may result in equipment damage. z Do not allow more than 50 sheets to accumulate in the print receptacle (Output Tray) while printing. z Do not raise the carrying handle when printing. If the prints touch the carrying handle, printing may not be done correctly. z Do not close the print receptacle cover when printing. If closed accidentally, press the print receptacle button to open the print receptacle cover. z If the printer overheats, it will temporarily stop operating. The printer will resume normal printing as soon as it cools down (This will occur if t he room is unusually warm or you are printing continuously). z Do not print on printed paper.
24Printing from Memory Cards Printing from Memory Cards Print images from a memory card that is inserted into the printer. • Make sure that a camera or computer is not connected to the printer. • This SELPHY printer supports image data conforming to the Design rule for Camera File system (Exif compliant) and DPOF (Ver.1.00) standard. • Use a memory card formatted in the camera. A memory card formatted in the computer might not be recognized. • Images that have been edited on a computer might not be displayed or printed successfully. • An image that has been taken by a mobile phone, depending on the size of the image when the image was taken, might not be displayed or printed successfully. • Movies cannot be played back on this printer.
25Printing from Memory Cards Compatible Memory Cards : You need to use the specific adapter for the card. * Purchase the CompactFlash Card Adapter for xD-Picture Card. SlotMemory Cards CompactFlash Card Microdrive xD-Picture Card* SD Memory Card miniSD Card SDHC Memory Card miniSDHC Card MultiMediaCard MMCplus Card HC MMCplus microSD Card microSDHC Card MMCmobile Card MMCmicro Card RS-MMC Card Memory Stick Memory Stick PRO Memory Stick Duo Memory Stick PRO Duo Memory Stick micro • For memory cards requiring an adapter, be sure to first insert the memory card into the adapter before inserting the adapter into the appropriate card slot. If you insert the memory card into a card slot without first inserting into an adapter, you may not be able to remove the memory card from the printer.
26Printing from Memory Cards Inserting a Memory Card Insert a single memory card into the printer. • Please refer to the user guide included with your memory card for handling instructions. 1Press until the power lamp lights green to turn on the power. 2Insert a single memory card into the appropriate card slot of the printer. • The startup screen appears on the LCD monitor. • An image is displayed on the LCD monitor. Label side 2• Insert a memory card fully into the appropriate slot. • When you remove a memory card from a card slot, grasp the portion of the card protruding from the card slot and pull it out. • If the confirmation screen for whether or not to use DPOF for printing is displayed on the LCD monitor, select [OK] or [Cancel] then follow the instructions below. [OK] : Step 3 on Page 29 [Cancel] : Page 27 • There is a lead-in guide to be tailored to the size of the memory card in the SD/ miniSD/MMC + slot. Insert a small memory card like miniSD in the lower slot to conform closely to the lead-in guide.
27Printing from Memory Cards Print Selected Photos (Basic Printing) You can select images, specify the number of prints for each, and then print them all out. 1Turn the printer on, and insert the memory card into the appropriate memory card slot (p. 26). 2Press or to select images. 3Press or to specify the number of prints. 4Press . • Printing starts. Total number of prints Number of prints of the selected image 2• Press to switch the displayed image information (p. 14). • Press to enlarge and print a portion of an image (trimming) (p. 44). 3• You can specify up to 99 prints per image. • If you make settings with or after specifying the number of prints, the number setting may be canceled. • Set borders, dates and other functions in [Print Settings] in advance (p. 46). • If you repeat Steps 2 and 3, you can specify the number of prints for multiple images and then print all of the images together. 4• By pressing when the number of prints for all images is 0 copies, you can print only one copy of the image selected.
28Printing from Memory Cards Print All Photos Print all the images on the memory card. 1Turn the printer on, and insert the memory card into the appropriate memory card slot (p. 26). 2Press and select [Print All Photos] with or . 3Press and check the settings. 4Press . • Printing starts. Print image Number of sheets required for printing Number of copies Number of images on memory card 3• Press or to specify the number of prints.
29Printing from Memory Cards Print an Image Using Camera Specified Settings (DPOF Print) You can make prints according to the DPOF (Digital Print Order Format) setting specified on the camera. For details on the DPOF settings, refer to the user guide provided with your camera. 1Turn the printer on, and insert the memory card into the appropriate memory card slot (p. 26). 2Press and select [DPOF Print] with or . 3Press and check the settings. 4Press . • Printing starts. Date and FileNo. set with the camera The Print type set with the camera : Number of standard prints : Number of index prints Number of sheets required for printing 2• Insert a memory card that has already had DPOF settings made with the camera, otherwise the printer will not display [DPOF Print] in the menu screen. 3• The date and file number reflect the DPOF settings. These settings cannot be changed with the printer. • The printers settings are reflected, such as [Borders] *, [Page Layout]*, [Correct Red- Eye]*, [Auto Optimize]*, [Adjust Image], and [My Colors] when printing with a Canon camera. Set [Print Settings] (p. 46) in advance. * [Print type] set to [Standard] in [Print Settings] (when using a Canon digital camera)
30Printing from Memory Cards Selecting an Image during Auto Play for Printing (Auto Play) All images on the memory card are automatically played back and an image can be printed by pausing auto play while that image is displayed. Each image displays for 3 seconds. 1Turn the printer on, and insert the memory card in the appropriate memory card slot (p. 26). 2Press and select [Auto Play] with or . 3Press . • Images are automatically played after they have finished being read. 4Press after displaying the image you wish to print. • Printing starts. 3• Press during auto play to pause/resume. • Press or while auto play is paused to return to the previous image or move forward to the next image. • Press or while auto play is paused to return to the menu screen. 4• Set borders, dates and other functions in [Print Settings] in advance (p. 46).