Canon Selphy Es2 User Guide

Making Printer Settings
81Appendix
Language
1Press   to select the [Printer Setup].
2Select [Language] and press  .
• The language selection screen is displayed.
3Press  ,  ,   or   to select the language you wish to set and 
press .
• The selected language is set and the display returns to [Printer Setup].
1• For how to use the menu, refer to page 78.
• When no memory card is inserted, or when no camera or computer is connected to the printer, 
press and hold down   and then press   to shortcut to the...

82Appendix
Cleaning the Printer
Cleaning the Inside of the Printer
Remove dust on the head of the cartridge with the supplied cleaner unit.
1Remove the cartridge (p. 20).
2Insert the cleaner unit in the cartridge compartment and push it in 
completely and slide it in and out 2 or 3 times.
Cleaning the Printer Casing
Wipe the casing with a soft dry cloth.
Cleaning the Back of the Printer
Clean the dust from the air vents on the back. Dust will get on the ink sheet if it enters from the air 
vents,...

83Appendix
Storing the Printer or the Printed Paper
Storing the Printer
Unplug the power cord from the power outlet (If using the battery pack, remove it).
Remove the cartridge from the printer and store it in its original package.
Storing Prints
• Avoid storing prints in the following places to prevent image quality from deteriorating.
- Places with high temperatures (40°C/104°F or higher).
- Places with high humidity or dusty areas.
- Places subject to direct sunlight.
• Please avoid the following...

84Appendix
Safety Precautions
Use this equipment correctly according to the following precautions to avoid the risk of injury, fire, 
electrical shock, malfunction or other hazards. Please also be sure to read Handling Precautions. 
Equipment refers to the printer and compact power adapter.
The safety precautions noted on the following pages  are intended to instruct you in the safe and 
correct operation of the printer to prevent inju ries or damage to yourself or other persons.
Equipment
WARNING
Do...

Safety Precautions
85Appendix
Battery (SELPHY ES2 only)
Do not handle the power cord if your hands are wet.
CAUTIONS
Do not stick any part of your hand into the printer interior.
Do not use or store the equipment in the following types of places.Humid or dusty areas, places subj ect to heavy vibrations, places near flames, places subject to 
strong sunlight, or hot places such  as an automobile trunk or dashboard. 
Do not attach metallic pins or allow dirt to collect on the power plug or recharging...

Safety Precautions
86Appendix
Do not place anything, such as tablecloths, carpets, bedding or cushions, on top of the 
battery charger while it is charging.There is a risk of heat generation or deformation if it is left connected for a long period of time.
Before you discard a battery, cover the terminals with tape or other insulators to prevent 
direct contact with other objects. Contact with the metallic components of other materials in waste containers may lead to fire or 
explosions.
CAUTIONS
RISK...

87Appendix
Handling Precautions
For the handling of memory cards, cameras, or computers, refer to the supplied users manual of 
each product.
Warning Against Copyright Infringement
Please respect all copyrights. Use of images produced by SELPHY ES2 or ES20 for purposes 
other than personal entertainment may be prohibited by law.
Warranty Limitations
This printers warranty is only effective in the count ry of sale. If a problem arises while the printer 
is in use abroad, please convey  it back to the...

Handling Precautions
88Appendix
If the print receptacle cover comes off, tilt the cover to LCD monitor side ( ) align the tip 
of the spring on the left side of the cover with the groove on the printer ( ) , and then 
insert the shaft on the right side of the cover into the printer ( ).If the print receptacle cover is not attached dur ing printing, paper that is finished printing may 
become jammed inside the printer.
Do not insert foreign objects into the print receptacle. zTo prevent malfunctions and...

89Appendix
Specification
All data is measured according to standard Canon testing procedures. We reserve the right to 
change specifications without notice.
Compact Photo Printer SELPHY ES2/ES20
Printing Method Dye-sublimation thermal transfer (with overcoating)
Print Resolution 300 x 600 dpi
(300 x 300 dpi : When a PC is c onnected, 2-up and higher layout 
or Creative Print is selected)
Gradation 128 shades per color (300 x 600 dpi)
256 shades per color (300 x 300 dpi)
Ink Dedicated ink and paper...

Specification
90Appendix
Compact Power Adapter CA-ES100 
InterfaceUSB Connecting to PictBridge compliant devices/a Canon Direct Print 
compliant camera: USB compliant Type A connector
Connecting to a PC: USB compliant Type B connector
Wireless IrDA
*2 (Print Beam) (SELPHY ES2 only)/Bluetooth (Print Beam)*3
Memory CardsSD Memory Card, miniSD Card, microSD Card*4, SDHC Memory 
Card, miniSDHC Card, microSDHC Card*4, MultiMediaCard, 
MMCplus Card, HC MMCplus Card, MMCmobile Card*4,
MMCmicro Card*4, RS-MMC...