Canon Selphy Cp790 User Guide

							
4
5
6
31
Choose stamps.
Press the udl r buttons, or turn the w 
wheel to choose the stamp to be printed in the 
area marked [] and press the o button. 
Follow the same steps to choose a stamp to be 
printed in the area marked [] and press the 
o button.


Even if [Date] is set to [Off] (p. 21), the date will be printed. However, with the exception of [Correct Red-Eye] (p. 23), [Image Optimize] (p. 23), [My Colors] (p. 23), and [Date Format] (p. 23), other settings made in “Printing a Variety of Images” will not applied.Changing the settings in [My Colors] (p. 23) will change the color settings on the image but will not affect the photo diary settings.Images with a resolution lower than 640 x 480 cannot be printed as calen\
dars.



Choose an image.
Press the l r buttons, or turn the w wheel to 
choose an image, then press the o button.
Press the m(EDIT) button to bring up the Edit 
menu, where you can use the trimming function 
(p. 24), the jump function (p. 33), or change the 
display information (p. 9).


Review image and print.
Press the ud buttons to choose a number of 
copies.
Press the p button to start printing.


To print without stamps, press the udl r 
buttons, or turn the w wheel to display the 
screen on the left, and choose the blank space 
in the bottom right hand corner.


C
O
P
Y  
						

							
2
1
3
32
Searching Images
Search Images Using Auto Play
You can play all the images on your memory card in order of their file number (images will display for 3 
seconds each), and search for images to print. 
Auto play images.
Press the m(MENU) button.
Press the ud buttons, or turn the w wheel to 
choose [Auto Play], then press the o button.
The loading image screen appears, and then 
auto play begins.



Viewing your images.
Each image will be shown for about 3 seconds.
If you press the l r  buttons, or turn the w 
wheel during playback, you can scroll through 
the images. If you hold down the l r buttons 
you can fast-forward through the images.
Press the m(BACK) button to end playback.



Choose an image and print.
Pressing the o button once will pause 
playback; pressing the o button again will 
resume playback.
Pressing p while playback is paused will print 
the currently displayed image.
When printing has finished, playback will 
resume.



Only one image per page will be printed. [Page Layout] settings made in \
“Printing a Variety of Images” (p. 22) will be disregarded.You can add transition effects to auto play (p. 45).



C
O
P
Y  
						

							
1
2
2
33
Using the Jump Function to Search Images
You can jump to an image using a specified search key.
Display the jump screen.
While in the image display screen (p. 15), press 
the m(EDIT) button.
Press the ud buttons, or turn the w wheel to 
choose [Jump], then press the o button.


Choose a search key.
Press the ud buttons to choose a search key, 
and press the l r buttons, or turn the w wheel 
to jump.
When  (Jump Selected Date) is selected, 
press the r button or the o button to enter 
jump mode. Press the ud buttons to choose 
a date, and press the l r buttons, or turn the 
w wheel, to view the only images taken on that 
date.


Search KeyJump Details 
 Jump 10 ImagesJumps ahead 10 images.
 Jump 50 ImagesJumps ahead 50 images.
 Jump 100 ImagesJumps ahead 100 images.
 Jump Selected ImagesJumps to images where you have set a number of copies (p. 16). 
 Jump Selected DateDisplays images by date.
 Displaying Images in Filtered Playback
1Display images filtered by date.
Choose  (Jump Selected Date) and press the 
r button or the o button.
Press the ud buttons to choose a date, then 
press the o button.
 will appear on the screen, and only the 
images taken on the selected date can be 
displayed.



Display filtered images.
Press the l r buttons, or turn the w wheel to 
display the images filtered by the selected date.
To release the filter, press the m(EDIT) button 
and choose [View all] from the edit menu.



C
O
P
Y  
						

							
3

Printing from Your Computer
If you connect your computer to SELPHY and use the supplied software, you can view all images at 
once and take advantage of various printing functions that cannot be don\
e with just SELPHY alone. 
Following the audio guidance will allow inexperienced computer users to \
print easily.
Items to Prepare 
SELPHY and a Computer
Supplied CD-ROM (COMPACT PHOTO PRINTER Solution Disk) (p. 4) 
USB Cable shorter than 2.5m (8.2 ft) (Commercially available). SELPH\
Y terminal requires a Type B 
connector.



WindowsMacintosh
OSWindows Vista (including Service Pack 1)Windows XP Service Pack 2,Service Pack 3Mac OS X v10.4 – v10.5
ConfigurationThe above OS should be pre-installed on computers with built-in USB port\
s.
CPUPentium 1.3 GHz or higher PowerPC G4/G5 or Intel Processor
RAMWindows Vista: 1 GB or moreWindows XP: 512 MB or more512 MB or more
InterfaceUSB
Free Hard Disk Space80 MB or more100 MB or more
Display1,024 x 768 pixels or more1,024 × 768 pixels or more
System Requirements
Choose favorite images from the list and print
You can choose images you wish to print from a list, and print them all a\
t 
once.

Print with decorations
You can add frames or stamps to your images and print. You can also 
add text to your images and print.

Print calendars
You can add calendars to your prints.
You need a CD-ROM drive to install the software.

C
O
P
Y  
						

							
2
1
3
3
Install and start the software
Windows XP and Mac OS X 10.5 are used for these explanations.
Prepare SELPHY.
Turn off SELPHY and remove the memory card.
Insert a paper cassette that contains paper, and 
an ink cassette into SELPHY (pp. 10 – 12).


Proceed with the installation to display the 
screen on the left. 

Connect SELPHY to a computer.
Use the USB cable to connect SELPHY to the 
computer.
Refer to the user guide included with the cable 
or computer for handling instructions.


Commercially available USB cable
Install the software.
Windows
Place the CD-ROM in the computer’s CD-ROM 
drive and click [Easy Installation] when the 
screen on the left appears.
Follow the onscreen instructions to proceed.
If the User Account Control window appears, 
follow the on-screen instructions to proceed.



Macintosh
Place the CD-ROM in the computer’s CD-ROM 
drive and double-click   .
When the screen on the left appears, click 
[Install] and follow the onscreen instructions to 
proceed.
When the install finishes, click [Finish] to 
complete the installation.




C
O
P
Y  
						

							
4
5
3
Confirm that the software has been 
started properly.
The software will start and the screen on the 
left will appear when a connection between 
SELPHY and the computer is established.
From now on, the software will automatically 
start when you perform Steps 2 to 4.
Windows
If the screen at the left does not appear, choose 
from the [Start] menu r [All Programs] r 
[Canon Utilities] r [SELPHY Photo Print] r 
[SELPHY Photo Print].
Macintosh
If the screen at the left does not appear, follow 
these steps to register your printer:  
After clicking [  ] in the menu, click [System 
Preferences], then [Print & Fax] to bring up the 
[Print & Fax] window. Click [+], choose [CP790] 
from the pop-up window and click [Add].  
After you have finished registering your printer, 
click [SELPHY Photo Print] from the Dock (the 
bar at the bottom of the desktop), and the screen 
at the left will appear.




Turn on SELPHY.
Press the q button to turn on SELPHY. 
Windows
When the installation finishes, click [Restart] 
to restart the computer and complete the 
installation.


SELPHY may not operate correctly if it is connected to a computer via a USB hu\
b.SELPHY may not function properly if other USB devices (with the exception of \
a USB mouse or USB keyboard) are used at the same time. Disconnect any other USB de\
vices from your computer and then reconnect SELPHY.Do not put your computer into the standby mode (or sleep mode) while S\
ELPHY is connected to the computer’s USB port. If you accidentally do so, awaken the computer from the stan\
dby mode without disconnecting the USB cable.For details on how to awaken the computer refer to the user guide provid\
ed with your computer.




C
O
P
Y  
						

							
1
2
3
3
Printing from Your Computer
Use the installed software (SELPHY Photo Print) to print images from the computer. The [Simple print] 
feature will be explained in this guide. Using this feature you can view\
 all your images at once and 
choose which ones you want to print. If your computer is equipped with s\
peakers, set the volume so 
that the audio guidance for necessary operations can be heard.
Display the print menu.
Click [Print menu]. 
If printing preparations are not complete 
(paper cassette and ink cassette inserted), you 
cannot click the Print Menu. Follow the audio 
guidance or onscreen instructions to perform the 
necessary operations.


Choose a print method.
Click [Simple print].
You can make prints with frames, stamps, and 
speech bubbles by clicking [Decoration print].
You can make prints with calendars added by 
clicking [Calendar print].



Choose an image.
Images will display in a list within the [My 
Pictures] folder in Windows, and the [Pictures] 
folder in Macintosh.

Click the selected image for 
printing.
The background color changes 
and the image is set for 
printing.
Use the same procedures to 
click all images you want to 
print.
If you click again, the 
background color switches 
back to the original color and 
the settings are canceled.




You can display images saved in another folder, if you press this button to choose a folder from the screen that appears.
You can choose the conditions for the images to display.

C
O
P
Y  
						

							
4
5
3
Choose the number of prints.
Choose the number of copies for each image.
Click [Print] to start printing.


Close the program.
Windows
When all printing is finished, Click  at the top 
right corner of the screen.
Macintosh
When all printing is finished, Click  at the top 
left corner of the screen.


Press the - or  + buttons to set the number of prints. 
 Turning off the Voice Guidance
The voice guidance may not play properly on some computers. If the voice guidance is difficult to 
hear, follow these steps to turn off the voice guidance before using the software.
Turning off the Voice Guidance
While in the screen from Step 1 in “Printing from 
Your Computer” (p. 37), check the [Off] radio 
button.
Turn off voice guidance.



C
O
P
Y  
						

							
2
1
3
4
3
Printing from Your Digital Camera
Choose and print images directly from a camera that supports the PictBri\
dge standard. A Canon brand 
camera will be used as an example to explain the print method. If operat\
ions are different for the 
camera you use, refer to the user guide for your camera. 
You cannot stop printing with the m(BACK) button. Use camera operations to stop printing.PictBridge is an industry standard established by the Camera & Imaging P\
roducts Association (CIPA). It allows any digital camera or video camera, regardless of the man\
ufacturer or model, to print images taken with the camera directly to a printer without using a\
 computer.

Check that there is no memory card 
inserted and that no computer is 
connected to SELPHY. 
Connect SELPHY to the camera using the 
USB cable included with the camera. 
First turn on SELPHY, then turn on the 
camera and play back the images on the 
camera.
Depending on the camera you use,  will 
appear on the camera’s screen.

Make the necessary settings on your 
camera to choose an image for printing. 
Printing starts.

C
O
P
Y  
						

							
1
2
3
4
0
Check the settings.
Printing Images Using Camera Specified Settings (DPOF Print)
You can make print settings and choose images to print on your camera and\
 then print the images all 
at once. For details, refer to the user guide provided with your camera.\
Insert a memory card containing DPOF 
settings made with the camera into the 
memory card slot.
[DPOF images remain  Print images?] appears 
on the screen.

Press the o button.
Print.
Press the p button to start printing.
“Print type” set with the camera : Standard : Index
[Date] and [File No.] set with the camera
Number of sheets required
The date and file number are the DPOF settings made with the camera (these settings cannot be changed with SELPHY).The screen in Step 3 can be also displayed when you press the m(MENU) button and choose [DPOF Print], then press the o button. [DPOF Print] only displays when a memory card is inserted that contains DPOF information set with the camera.



C
O
P
Y