Canon scanner imageFORMULA CR50 User Manual

51
AHook your finger around the open lever and open the 
Maintenance Cover.
BRemove the Imprinter Cover.
CSqueeze in both sides of the print position adjustment lever 
and move the print cartridge carriage to its lowest position.
DPush back the ink cartridge lock lever in the direction of the 
arrow in the diagram below, and pull out the ink cartridge by 
grasping the tab as shown in the diagram.
CAUTION
Do not touch the ink jet nozzle right after imprinting. The nozzle may be 
very hot. 

52
ESet the ink cartridge.For more information, see “Setting the Ink Cartridge and 
Adjusting the Print Position,” on p. 24.
FCarefully replace the Imprinter Cover.
GGently close the Maintenance Cover until it clicks into place.
Adjusting the Separation Roller Gap
If double feed should occur too often, adjust the Separation Roller gap 
according to the following procedure.
IMPORTANT
Make sure that the size, thickness, and weight of your document meets the 
conditions of this scanner. See “Document,” on...

53
BPull out the document feed tray.
CLoad two checks or check-stock paper together.
DSlide the two sheets through between the feeding roller and 
the separation roller and stop at the position shown below.
NOTE
If you were unable to slide both sheets through the gap between the rollers, 
turn the paper thickness adjustment dial counter-clockwise (left) until both 
sheets two pieces easily slide through the gap.
EGently remove one of the sheets.
Separation Roller
Feeding Roller
Paper Thickness...

54
FAdjust the gap between the feeding roller and the separation 
roller to optimum width.
While one sheet remains in place between the rollers, 
continuously attempt to slide the second sheet (in front of the 
remaining sheet) to the right, back through the roller gap.
Slowly turn the paper thickness adjustment dial clockwise (right) 
just until the second sheet stops feeding into the gap.
IMPORTANT
Turning the Adjustment Dial clockwise too much may damage the rollers.
GRemove the sheets from the paper...

55
Scanner SpecificationsAC Adapter Specifications
■Use the recommended operating environment for the ink 
cartridge when using the imprinter.
■ You can use the functions noted above if your software 
supports them.
■ These functions may not work depending on your computer’s 
capabilities and the software you are using.
Specifications are subject to change without notice.
Specifications
Type Desktop sheet-through scanner
Document size Height: 50 to 108 mm (2.0 to 4.3)
Length: 80 to 228 mm (3.1 to 9.0)...

56
Index
A
AC Adapter Specifications ............................................... 55
Adjusting the Print Position .............................................. 24
Amount loaded ................................................................. 35
C
Cleaning
Main unit .................................................................... 45
Cleaning the Inside of the Scanner .................................. 45
Connectors/Power Switch ................................................ 16
D
Daily Cleaning...

57
P
Paper Thickness Adjustment Dial .................................... 14
Power Connector ............................................................. 16
Power Cord ................................................................ 13, 22
Power Indicator ................................................................ 14
Power Supply ................................................................... 11
Power Switch ................................................................... 16
Print Position...

CANON ELECTRONICS INC.
1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPAN
CANON U.S.A. INC.
ONE CANON PLAZA, LAKE SUCCESS, NY 11042, U.S.A.
CANON CANADA INC.
6390 DIXIE ROAD, MISSISSAUGA, ONTARIO L5T 1P7, CANADA
CANON EUROPA N.V.
BOVENKERKERWEG 59-61, P.O.BOX 2262, 1180 EG AMSTELVEEN, THE NETHERLANDS
CANON LATIN AMERICA, INC.
703 WATERFORD WAY, SUITE 400, MIAMI, FL 33126, U.S.A.
CANON SINGAPORE PTE. LTD.
1 HARBOUR FRONT AVENUE #04-01, KEPPEL BAY TOWER, SINGAPORE 098632
CANON HONGKONG COMPANY...