Canon scanner CanoScan N650U User Manual
Have a look at the manual Canon scanner CanoScan N650U User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
71 chapter 6 Preferences Settings Top Page Glossary Contents Index General Settings The General sheet provides details the name of the connected scanner, its current status, and a button for diagnostic testing. Executing a Diagnostic T est Follow the procedure below to execute the scanner diagnostic test. 1.Click the Test Scanner button. The scanner diagnostic test begins. If the test detects no problems, a message will tell you that the scanner has passed the diagnostic test. 2.Click the OK button. Note You cannot perform the scanner diagnostic test while ScanGear CS-U is starting.
72 chapter 6 Preferences Settings Top Page Glossary Contents Index Events Settings The Event sheet allows you to select the software application that you want to start when you press the Start button on the front of the scanner. Scanner events Selects the Start button on the front of the scanner. Send to this application The list box provides the names all of the TWAIN-compliant software applications which can be started when you press the Start button on the scanner. Click the check box on to select the software application to be started by pressing the Start button on the scanner. After installing all the software with using the CanoScan Setup Utility CD-ROM, only the check box for CanoScan Toolbox CS is checked on. Disable device events Click this check box off to disable this feature. Clicking this check box off disables the Start button on the scanner (nothing will happen if the button is pressed).
73 chapter 6 Preferences Settings Top Page Glossary Contents Index Preferences Settings When application hides the driver user interface Some application softwares such as an OCR software will not display the ScanGear CS-U main window while scanning. With such application softwares, scanning is executed with the settings of the application software so that the Color Mode setting cannot be changed. In this setting sheet, placing a check mark in the check box of Color (Documents) or Text Enhanced (OCR) instead of B&W will execute the scan in the Color Mode setting as Color (Documents) or Text Enhanced (OCR), regardless of the application software setting. •Color (Documents) When you place a check mark in this check box, the scan will be executed in Color (Documents), if even the application software sets the Color Mode to Color (Photos). The default setting is Off. •Text Enhanced (OCR) instead of B&W When you place a check mark in this check box, the scan will be executed in Text Enhanced (OCR), if even the application software sets the Color Mode to Black and White. The default setting is Off. Color Settings When the Color Mode is set to Color (Photos) or Color (Documents), you can select the color adjusting method for scanning from Standard, Canon ColorGear Color matching or None. The default setting is Standard. •Standard This setting adjusts the colors of the scanned original to match colors displayed on the monitor. This setting is suitable when you are viewing the scanned image on the monitor with album softwares or such. •Canon ColorGear Color matching The adjustment is automatically made in order to make the colors of the scanner, monitor and printer the same. This reduces the inconvenience for color adjustments of the monitor and printer. Select this setting when you output the scanned image to a color printer.
74 chapter 6 Preferences Settings Top Page Glossary Contents Index •None No adjustment is made. Select this setting when you yourself will adjust the image with the color adjustment function of the ScanGear CS-U or with other graphic softwares. Note When you specify “Canon ColorGear Color Matching” setting, the Auto Tone button will be grayed out and the Tone sheet in the Advanced Mode will not be displayed. Preview at opening of ScanGear CS-U The preview opening settings determine what is displayed in the Preview Area every time ScanGear CS-U is launched from the parent software application. •Automatically execute a preview This setting switches the automatic preview feature on. When this feature is selected, a preview is executed automatically when ScanGear CS-U is launched, and an image of the original on the scanner is displayed in the Preview Area. •Display saved preview image This setting switches the preview image cache feature on. When this feature is selected, the image in the Preview Area is saved when ScanGear CS-U is closed and then displayed again the next time ScanGear CS-U is launched. Clicking the Clear button clears the cached image from the previous launch. Any changes performed on the image in the Preview Area are reflected in the image saved for the next preview. •None Click this button to switch the automatic preview and preview image cache features off. Automatically quit ScanGear CS-U after scanning Click the check box if you want ScanGear CS-U to close every time you click the Scan button to scan an image.
75 chapter 6 Preferences Settings Top Page Glossary Contents Index Color Management Settings The Color Management sheet allows you to add or remove basic profiles for Canon ColorGear Color Matching. • Click the Canon ColorGear Color Matching check box on in the Preferences sheet. • The sRGB Color Space Profile is added automatically when ScanGear CS-U is installed. • If several profiles have been added, only the most recent profile added is enabled. • Even if you delete all profiles, the sRGB Color Space Profile will remain automatically selected.
76 Top Page Glossary Contents Index chapter 7 Troubleshooting Pre-Scan Checklist How to Avoid Problems Troubleshooting Checklist
77 chapter 7 Troubleshooting Top Page Glossary Contents Index Pre-Scan Checklist Perform the checks on this short list before you begin troubleshooting specific problems. •Make sure that the ScanGear CS-U software was installed successfully. •Confirm that the cables between your computer and scanner are connected securely. •Before scanning or previewing, check that the data source has been selected. If your scanner does not appear as an option when you select a TWAIN source to scan from your imaging software, you have to install ScanGear CS-U again. (p.12)
78 chapter 7 Troubleshooting Top Page Glossary Contents Index How to Avoid Problems Here is some general advice on avoiding problems in your scanning jobs: •Start with the best possible original image to scan. •Select only the part of the image you want to scan. Preview the image and select it with the Crop and Auto Crop buttons. Not only does a more precise selection save file space, but your image quality will be much higher. •Check the output file size before beginning the scan. Make sure you have enough room if you are scanning files that require a large amount of disk space. •Match your Color Mode to the output purpose. If you are scanning text, use the Text Enhanced mode. If you are scanning line art, use the Black and White setting, and so on. •Match your scan resolution to the type of file you need. If you are scanning images for use as .GIF or .JPG files on the Web, you do not have to scan at 600 dpi. Although it is recommended that you scan at a higher resolution than you need for high-quality color images, you should balance that factor against your planned use for the image. •Take advantage of the Tone sheet features to enhance your images. (p.40) •Try to use TrueColor mode on your monitor so you can view your preview image as accurately as possible.
79 chapter 7 Troubleshooting Top Page Glossary Contents Index •If you are using OCR software, scan in Text Enhanced at 300 dpi or higher. •Take advantage of the preview feature and preview as much as you want before scanning.
80 chapter 7 Troubleshooting Top Page Glossary Contents Index Troubleshooting Checklist The scanner diagnostics test fails. Problem:The Scanner Diagnostics test started with the Test Scanner button on the Scanner sheet, returns a Test Failed message. Cause:The scanning unit may not be in its home position. Solution:Close the ScanGear CS-U window if it is open. Try turning the scanner off and back on again by unplugging and plugging in the USB cable. Then restart your computer. Colors not what you expect. Problem:The colors in the preview image appear different from the colors in the original image. Cause:The scanned colors need to be adjusted. Solution:Make sure the Auto Tone button is selected. If further adjustments are necessary, use the Tone sheet buttons. The preview image of a photograph appears blurred but the scanned image of the same photograph appears sharp. Problem:When zooming in on a photograph in the Preview Area, the enlarged image appears blurred. Cause:The preview scan uses a lower resolution than the final scan. If you zoom in on a preview image so it is enlarged, the image will not maintain its resolution in the same way as the final scanned image. Solution:Select a magnified area and preview the image again. The scan should display a sharper image.