Canon scanner CanoScan LiDE 80 User Manual

							Try Scanning
9
7Click [Scan].
The final scan will start. 
8Click   or   (close box) in the ScanGear CS  
window to close it.
The scanned image will appear in the PhotoStudio window.
9Save the scanned image.
Click the [File] menu and select [Save As]. Select the folder 
where you wish to store the image file, enter a file name, 
select a file type (JPG format is recommended) and click [Save].
10 Click   or   (close box) in the PhotoStudio 
window to close it.
• If the scanner does not perform as described above, read the Troubleshooting section 
of the Scanning Guide (HTML format manual).
• For details about the bundled software programs, read the Scanning Guide or the User’s 
Guide (PDF format manual) for each software program on the CanoScan Setup Utility 
CD-ROM. 
						

							Using the Scanner Buttons
10
Using the Scanner Buttons
You can use the four convenient buttons on the scanner’s front panel to scan and perform related tasks 
easily with a single touch of the button. Place an item on the document glass of the scanner before pressing 
a button.
 
• To use these buttons, ScanGear CS, CanoScan Toolbox, ArcSoft PhotoBase and Presto! 
PageManager (for Windows)/Acrobat Reader (for Macintosh) should be installed from 
the CanoScan Setup Utility CD-ROM.
 COPY Button
To print (copy) the scanned image with a printer:
1Press the [COPY] button.
2The scanner will scan the item.
3The scanned image will print.
• The printer driver should be installed and the 
printer should be on-line to use this function.
 SCAN Button
To open the scanned image in the PhotoBase 
window:
1Press the [SCAN] button.
2The scanner will scan the item.
3The scanned image will appear in the 
PhotoBase window.
 FILE Button
To save the scanned image as a PDF file:
1Press the [FILE] button.
2The scanner will scan the item.
3The scanned image will be saved as a 
PDF document and appear in Presto! 
PageManager (for Windows) or Adobe 
Acrobat Reader (for Macintosh). 
• If you press the [Cancel] button while scanning, you can change the default settings for 
scanning. For changing settings or arranging the scanner button assignments, refer to 
the “CanoScan Toolbox” section of the Scanning Guide (HTML format manual). 
 E-MAIL Button
To e-mail the scanned image as an attached file:
1Press the [E-MAIL] button.
2The scanner will scan the item.
3The [E-mail software selection] dialog 
will appear. Select an option from the 
list and click [OK].
This step is required only for the first scan.
4The e-mail software will start and the 
scanned image will be attached in a 
new message window.
5Enter the receiver’s address and title, 
write a message, confirm the required 
settings, and send the message.
• The e-mail software, such as Outlook Express, 
Microsoft Outlook, Eudora or Netscape 
Messenger, should be installed and enabled. With 
certain e-mail programs, you should enable the 
MAPI function (for Windows). 
						

							Scanning Film
11
Scanning Film
This scanner can scan 35 mm film strips one frame at a time. 
Preparing to Scan Film
Use the following procedures to place the Film Adapter Unit and the Film Guide on the document glass to 
scan film. 
1Attach the cable for the Film Adapter Unit to the FAU 
connector on the scanner’s back panel. 
2Open the document cover and place the Film 
Guide on the document glass of the scanner.
Calibration
Calibration is required the first time the scanner is used to scan film. This procedure adjusts the scanner 
output so that items are reproduced with the correct coloration. It is explained below using the example of 
ArcSoft PhotoStudio and ScanGear CS in Simple Mode.
1Remove the CAP from the Film Adapter Unit 
and gently set the Film Adapter Unit over 
the first frame in the Film Guide (frame 
closest to the front).
• Clean the document glass before placing the Film Guide on it, otherwise dirt and dust 
can affect image quality or damage the film. 
• You cannot scan film with the scanner in the upright position.
• If there is film in the Film Guide, 
remove it before setting the Film 
Adapter Unit on it.
• Be careful not to lose the CAP or 
to allow dirt into it. 
Align the two film guide tabs 
over the slots at the documen
glass edge and secure it with 
the clip at the back.
Position the Film Adapter Unit 
so that its alignment tab is 
aligned with the Film Guide. 
						

							Scanning Film
12
2Gently close the document cover.
3Start ArcSoft PhotoStudio. 
Select [Start], [Programs] or [All Programs], [ArcSoft PhotoStudio] and [PhotoStudio 5].
Double-click the [Applications (Mac OS 9)] and [PhotoStudio] folders and the 
[PhotoStudio] icon.
4Start ScanGear CS.
Click the Acquire icon   or click the [File] menu and select [Acquire].
If an error message appears, click the [File] menu, choose [Select Source], select your 
scanner model name and click the [Select] button.
Click the Acquire icon   or click the [File] menu and select [Import...].
When the [Select Source] dialog displays, select [ScanGear CS 7.2] and click the [OK] 
button. 
ScanGear CS will start.
5In the [Select source] category, select [Color 
Negative Film] or [Color Positive Film].
The “No calibration data exists to perform film scanning.” 
message will display.
6Click the [OK] button.
The calibration process will start and take approximately 1 minute.
The calibration process is finished when the message disappears. 
• Do not press down on, or rest your hands on, 
the document cover.
• Be careful not to force the document cover 
down.
• If ScanGear CS is already running, click the close box (  Windows,   Macintosh) 
and close it.
• Do not open the document cover during the 
calibration process.  
						

							Scanning Film
13
7Open the document cover and 
remove the Film Adapter Unit. 
To continue scanning your film, follow the 
Scanning Film steps. 
Scanning Film 
The following steps explain how to scan films with ArcSoft PhotoStudio and ScanGear CS.
1Place the film in the Film Guide.
Place the film face up in the Film Guide (images 
and words should read correctly from above) with 
the spaces between frames aligned with the white 
lines on the guide.
2Remove the CAP from the Film Adapter Unit 
and gently set the unit over the frame you 
wish to scan.
3Gently close the document cover.
4Start ArcSoft PhotoStudio.
Select [Start], [Programs] or [All Programs], [ArcSoft PhotoStudio] and [PhotoStudio 5].
Double-click the [Applications (Mac OS 9)] and [PhotoStudio] folders and the 
[PhotoStudio] icon.
• Clean the document glass before placing the Film Guide on it, otherwise dirt and dust 
can affect image quality or damage the film. 
• Use a blower brush to remove any dust from the film, which will affect the image 
quality, and take care to hold the film by its edges to avoid transferring dirt or 
fingerprints to it.
• Do not move the Film Adapter 
Unit once it has been placed on 
the Film Guide. Sliding it may 
scratch the film. 
• The document cover does not touch the document glass completely. Be careful not to 
force the document cover down. 
• Do not press down on, or rest your hands on, the document cover.
Put the CAP back 
on the Film 
Adapter Unit.
White Line
Position the Film Adapter Unit so that its align-
ment tab is aligned with the Film Guide. 
						

							Scanning Film
14
5Start ScanGear CS.
Click the Acquire icon   or click the [File] menu and select [Acquire].
If an error message appears, click the [File] menu, choose [Select Source], select your 
scanner model name and click the [Select] button.
Click the Acquire icon   or click the [File] menu and select [Import...].
When the [Select Source] dialog displays, select [ScanGear CS 7.2] and click the [OK] 
button. 
ScanGear CS will start.
6In the [Select source] category, select [Color 
Negative Film] or [Color Positive Film].
7Confirm that the [Select Frame] category is set to 
[Auto select]. You can also select a frame number.
ScanGear CS’s Simple Mode is preset so that film is scanned 
and printed at 300 dpi at approximately the photo size (8.9 x 
12.7 cm/ 3.5 x 4.7 in.). 
8Click [Preview].
ScanGear CS will display the preview image.
9Click [Scan].
The final scan will start.
10 Click   or   (close box) in the ScanGear CS  
window to close it.
The scanned image will appear in the PhotoStudio window.
• Use the Advanced Mode to scan 
monochrome film (See the Scanning Guide).
• If the image does not display, select a frame 
number in Step 7, before clicking the 
[Preview] button.
• Do not open the document cover while a 
scan is in progress.
• Read the “Calibration Message” section (p. 
15) if a calibration message appears. 
						

							Scanning Film
15
11 Save the scanned image.
Click the [File] menu and select [Save As]. Select the folder 
where you wish to store the image file, enter a file name, 
select a file type (JPG format is recommended) and click [Save].
Post Film Scanning Procedures
1Open the document cover, remove the Film Adapter Unit and replace its CAP. 
2Remove the film and the Film Guide from the document glass.
• You can purchase the following Accessory Kit for CanoScan LiDE80 if the Film Guide, Film 
Adapter Unit or its CAP are lost or damaged. 
Accessory Kit (A)(CSAK-LiDE80A) : Film Guide, CAP for Film Adapter Unit
Accessory Kit (B)(CSAK-LiDE80B) : Film Guide, Film Adapter Unit (with CAP)
Calibration Message
You must calibrate the scanner if the message to the 
right appears. Use the following procedures to 
calibrate it. 
1. Open the document cover and remove the Film 
Adapter Unit.
2. Remove the film from the Film Guide and position the Film Adapter Unit over the first frame 
(closest to the scanner’s front) of the empty Film Guide on the document glass.
3. Gently close the document cover and click the [OK] button. 
The calibration process will start and finish after approximately 1 minute.
4. Put the film back in the Film Guide once the calibration process is complete and place the 
Film Adapter Unit back over the frame you wish to scan.
5. Click the [OK] button to display the preview image.
• If the scanner does not perform as described above, read the Troubleshooting section 
of the Scanning Guide (HTML format manual).
• For details about the bundled software programs, read the Scanning Guide or the User’s 
Guide (PDF format manual) for each software program on the CanoScan Setup Utility 
CD-ROM.
• Always put the CAP back on the Film Adapter Unit when it is not in use.
• Film may be damaged if it is left on the document glass for extended periods of time.  
						

							Specifications
16
Specifications
*1 16 bit output supports only for film scanning.*2 USB 2.0 Hi-Speed mode. Transfer time to computer is not included.*3 Calibration processing time is not included.*4 35 mm slides not supported.
• Specifications are subject to change without notice.CanoScan LiDE 80
Scanner TypeFlatbed
Scanning ElementCIS (Color Contact Image Sensor)
Light Source3-color (RGB) LED
Optical Resolution2400 x 4800 dpi
Selectable Resolution25 - 9600 dpi (ScanGear CS)
Scanning Bit DepthColor 16 bit input / 16 bit or 8 bit output for each color (RGB)
Grayscale
16 bit input / 16 bit or 8 bit output 
*1
Scanning Speed *2
(Photo or Document)Color10.38 msec./line (1200 dpi), 20.7 msec./line (2400 dpi)
Grayscale,B&W3.46 msec./line (1200 dpi), 6.9 msec./line (2400 dpi)
Scanning Speed *2 (Film)5.16 -  82.56 msec/line
Preview Speed 
*3Approximately 9 sec. 
InterfaceUSB 2.0 Hi-Speed / USB (USB 1.1 equivalent)
Maximum Document SizeA4/Letter: 216 x 297 mm
Film Type/Number of Frames
35 mm strip (negative/positive) 
*4 / 1 frame
Scanner Buttons4 buttons: COPY, SCAN, FILE, E-MAIL
Operating RangeTe m p e r a t u r e
5
°C to 35°C (41°F to 95°F)
Humidity10% to 90% RH , 20% to 80% RH when scanning film 
(without condensation formation)
Power RequirementsSupplied via USB port
Power ConsumptionIn operation: 2.5 watts maximum, Stand-by: 1.5 watts
Maximum Exterior Dimensions258 x 374 x 38 mm (10.1 x 14.7 x 1.5 in.)
WeightApproximately 2.0 kg (4.4 lbs) 
• Before you upgrade to Windows XP from Windows 98/Me/2000, you must uninstall 
ScanGear CS and CanoScan Toolbox using the “Uninstall the Software” menu of the 
CanoScan Setup Utility CD-ROM. The scanner may not work if you upgrade to Windows 
XP with these programs still installed. After upgrading to Windows XP, reinstall 
ScanGear CS and CanoScan Toolbox according to the steps on page 3. For details, please 
read the “Troubleshooting” section of the Scanning Guide (HTML format manual).  
						

							1
System Information
This form should be used to record the operating environment for the purchased scanner. 
If any problems occur with the scanner, you will need this information when you contact our Customer 
Support Help Desk. Be sure to record the information and store it in a safe location.
• This information is also required to request a repair under warranty. Make sure you record the 
information and store it in a safe location.
• Guaranteed servicing for this equipment will expire five years after production ceases. 
• About the Computer Used
  Date of Purchase:
Dealer Tel:
Dealer Address:
Scanner Model: CanoScan LiDE 80
Serial Number (on the back of the equipment):
Manufacturer: Model:
CPU: Clock Speed: MHz
Memory Capacity (RAM): MB
Space Available: MB Hard Disk Capacity: MB
OS:     Windows  XP  Me  2000  98
Macintosh  OS 9.0  OS 9.1  OS 9.2  OS X v10.1  OS X v10.2
Monitor Type: Monitor Size: inches
Printer: Manufacturer:
Type of Printer: Printer Resolutions:
Installed Virus Protection Program:
Installed Compression Program:
On-Board Expansion Cards:
Attached Peripherals:
Connected Network System: 
						

							1
CANON INC.30-2, Shimomaruko 3-chome, Ohta-ku Tokyo 146-8501, Japan
CANON U.S.A., INC.One Canon Plaza, Lake Success, New York 11042, U.S.A.Customer Care Center: 1-757-413-2848
http://www.usa.canon.com/consumer
CANON CANADA INC.6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada 1-800-OK CANON
http://www.canon.ca
CANON LATIN AMERICA, INC.703 Waterford Way, Suite 400 Miami, Florida 33126, U.S.A.
CANON MEXICANA, S. de R.L. de C.V.Anillo Periferico Sur No. 4124, Torre Zafiro (II) Colonia Ex-Rancho de Anzaldo, 
Piso 5 y 6, Mexico D.F.
Tel. (525) 5490-2000
CANON PANAMA, S.A.Apartado 7022, Panama 5, Rep. de Panama
Tel. (507) 279-8900
CANON CHILE, S.A.Ave. Manquehue Norte #1337, Piso 3, Casilla 187-9 Santiago, Chile
Tel. (562) 366-6600
CANON ARGENTINA, S.A.Ave. Corrientes 420 (1043) Buenos Aires, Argentina
Tel. (5411) 432-59800
CANON EUROPA N.V.P.O. Box 2262 1180 EG Amstelveen, The Netherlands 
CANON (UK) LTD.Woodhatch, Reigate, Surrey RH2 8BF, United Kingdom For technical support, please contact Canon Help Desk.P.O. Box 431, Wallington, Surrey SM6 0XU, UK
Tel: (08705) 143 723 (Calls may be recorded)
Fax: (08705) 143 340 
For sales enquiries, please call 08705 143723
CANON COMMUNICATION & IMAGE FRANCE S.A.102 Avenue du Général de Gaulle 
92257 LA GARENNE COLOMBES CEDEX, France 
Tél: 01.41.30.15.15     Fax: 01.41.30.15.05
E-mail:[email protected]
http://www.canon.fr
CANON DEUTSCHLAND GmbHEuropark Fichtenhain A10, 47807 Krefeld, GermanyTechnischer SupportTelefax: 0810 / 500 60 22 (0.12€/Min.)
http://www.canon.de
CANON ITALIA S.P.APalazzo L, Strada 6, 20089 Milanofiori, Rozzano (MI), Italy
Tel: 02/8248.1     Fax: 02/8248.4604
Pronto Canon: 02/8249.2000
http://www.canon.it
CANON NEDERLAND N.V.Neptunusstraat 1, 2132 JA Hoofddorp, The Netherlands
Tel: 023-5 670 123     Fax: 023-5 670 124
Helpdesk: 023-5 681 681
http://www.canon.nl
CANON BELGIUM N.V./S.A.Bessenveldstraat 7, B-1831 Diegem, Belgium
Tel: 02 7220411     Fax: 02 7213274
Helpdesk: 090010627
http://www.canon.be
CANON LUXEMBOURG S.A.Rue des Joncs 21, L-1818 Howald, Luxembourg
Tel.: (352) 48 47 961     Fax: (352) 48 47 96232
Helpdesk: 900 74100
http://www.canon.lu
CANON Ges.m.b.H.Zetschegasse 11, 1230 Wien, Austria
Tel.: (01) 680 88-412     Fax: (01) 680 88-413
http://www.canon.at
CANON CEE GMBHOberlaaerstr. 233, A-1100 Wien, Austria
Tel: +43 1 680 88-331     Fax: +43 1 680 88-333
CANON (SCHWEIZ) AGProduct Support CCI Industriestrasse 12, 8305 Dietlikon, Switzerland
Fax: 0041 (0) 1 835 68 59
Hotline: 0900 57 55 20 (Fr.2.13/min)
http://www.canon.ch
CANON ESPAÑA S.A.C/Joaquin Costa, 41-28002, Madrid, Spain 
Tel.: 91-538 4500     Fax.: 91-411 4176
Tel: Atención al cliente: 901.301.301
Help Desk: 906.301255
E-mail:[email protected]
CANON DANMARK A/S1. Kund Højgaards Vej1, DK-2860 Søborg, DenmarkHotline: +45 44 88 25 91
Forhandlerhenvisning:
http://www.canon.dk
CANON NORGE asHallagerbakken 110, Postboks 33, Holmlia, 1210 Oslo, Norway 
Tlf: 2262 9321     Faks: 2262 0615
http://www.canon.no
CANON SVENSKA ABGustav III:s Boulevard 26, S-169 88 Solna, SwedenSupport-Under garantitiden: Tel. 08-744 86 20Support-Efter garantitiden: Tel. 0900-20 30 555
E-post support: [email protected]
http://www.canon.se
CANON OYKornetintie3, 00380 Helsinki, Finland
Puhelin: 010 54420     Fax: 010 544 4571 
Helpdesk: 0600 0 22606 (9,95 mk/min+pvm)Helpdesk: 0600 0 22666 (enint. 40 mk/puhelu+pvm)
Faksi: 010 544 4382
Sähköposti: [email protected]
Internet: www.canon.fi
CANON NORTH-EAST OYHuopalahdentie 24, P.O. Box 46, FIN-00351 Helsinki, Finland
Tel. +358 10 544 20     Fax +358 10 544 10
http://www.canon.ru
http://www.canon.ee
http://www.canon.lv
http://www.canon.lt
COPICANOLA SARua Alfredo da Silva, 14, 2721-862 Alfragide, Portugal
Tel: 21 471 11 11     Fax: 21 471 09 89
www.copicanola.pt
[email protected]
CANON SINGAPORE PTE. LTD.79 Anson Road #09-01/06, Singapore 079906
http://www.canon-asia.com
CANON MARKETING SERVICES PTE. LTD.No. 1, Jalan Kilang Timor, #09-00 Pacific Tech Centre, Singapore, 159303
Tel: 65-6799-8888,     Fax: 65-6273-6786
Hotline: 65-6334-2726
http://www.canon.com.sg
CANON MARKETING (MALAYSIA) SDN. BHD.Block D, Peremba Square 
Saujana Resort, Section, 40150 Shah Alam, Selangor Darul Ehsan 
Malaysia
Tel: 603-7844-6000,     Fax: 603-7844-6048
Helpdesk: 603-7844-6008/9
Enquiry: [email protected]
http://www.canon.com.my
CANON MARKETING (THAILAND) CO. LTD.179/34-45 Bangkok City Tower, 9th-10th Floor
South Sathorn Road, Thungmahamek
Sathorn, Bangkok 10120, Thailand
Tel: 662-3449999,     Fax: 662-3449968
http://www.canon.co.th
CANON MARKETING (PHILIPPINES) INC.Marvin Plaza Building, 2153 Don Chino Roces Ave,
Makati City, Metro Manila, Philippines
Tel: 632-8126047,     Fax: 632-8120067/8109797
CANON INDIA Pvt. LTD.Neela Gagan, Mandi Road, Mehrauli, New Delhi-110030, India
Tel: 91-11-6806572,     Fax: 91-11-6807180
CANON HONGKONG CO., LTD.9/F, The Hong Kong Club Building 3A, Chater Road, Central, Hong Kong
TEL: (852) 2739 0802     FAX: (852) 2739 6428
CANON AUSTRALIA PTY. LTD.1 Thomas Holt Drive, North Ryde, Sydney N.S.W. 2113, Australia 
Info-Line: (02) 9805 2864
CANON NEW ZEALAND LTD.Akoranga Business Park, Akoranga Drive, Northcote Auckland, New Zealand 
Info-Line: (09)489 0470
ADOBE SYSTEMS INCORPORATEDhttp://www.adobe.com
ARCSOFT, INChttp://www.arcsoft.com
SCANSOFT, INChttp://www.scansoft.com
I-IE-080A ©CANON INC. 2003 PRINTED IN CHINA