Canon scanner CanoScan LiDE 80 User Manual

1
Setup and Scanning
Try the Additional Features
Check the Package Contents
Install the Software
Windows
Macintosh
Unlock the Scanning Unit
Connect the Scanner
Try Scanning
p.2
p.3
p.4
p.5
p.6
p.7
Using the Scanner Buttonsp.10
Scanning Film p.11
Be sure to install the software programs before connecting the scanner 
to the computer!
Quick Start Guide Quick Start Guide 

1
• CanoScan and ScanGear are trademarks of Canon Inc.
• Adobe®, Acrobat® and Photoshop® are trademarks of Adobe Systems Incorporated. 
• Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries.
• Macintosh, Power Macintosh and Mac OS are trademarks of Apple Computer, Inc., registered in the U.S. and other 
countries.
• ScanSoft and OmniPage are trademarks of ScanSoft, Inc.
• Other names and products not mentioned above may be trademarks or registered...

Guide to the Manuals
1
Guide to the Manuals
Open the Package
Quick Start Guide (this guide)
This guide describes a series of processes, from opening the package to using the 
scanner.
READ THIS GUIDE FIRST!
Scanning Guide (HTML format manual)
Refer to this guide when you have finished setting up the scanner according to the procedures 
in the Quick Start Guide. It describes how to utilize the scanner with the bundled software, 
and how to solve problems when they occur. You can install this manual onto...

Check the Package Contents
2
Check the Package Contents
Scanner and Accessories
Documents and Software Programs
• Quick Start Guide (this guide)
• Additional Documents
• CanoScan Setup Utility CD-ROM
• Adobe Photoshop Elements CD-ROM
• The two figures in the brackets below indicate the respective sizes of the Windows/
Macintosh versions of the software.
• Approximately 514 MB (for Windows) / 303 MB (for Macintosh) of hard disk space on 
your computer is required to install all the programs. Additional...

Install the Software (Windows)
3
Install the Software (Windows)
1Turn the computer on.
2Place the CanoScan Setup Utility CD-ROM in the drive.
The CanoScan Setup Utility main menu will display.
3Click [Install the Software].
Read the SOFTWARE USER LICENSE AGREEMENT. Click [Yes] if 
you accept the terms.
The [Install] window will display.
4Click [Start Installation].
You will install seven software programs and the Scanning Guide 
(HTML format manual).
5The installation procedure will start.
Follow the...

Install the Software (Macintosh)
4
Install the Software (Macintosh)
1Turn the computer on. 
2Place the CanoScan Setup Utility CD-ROM in the drive.
The CanoScan Setup Utility main menu will display. 
3Click [Install the Software].
Read the SOFTWARE USER LICENSE AGREEMENT. Click [Yes] if 
you accept the terms.
The [Install] window will display.
4Click [Start Installation].
You will install six software programs and the Scanning Guide 
(HTML format manual).
5The installation procedure will start.
Follow the...

Unlock the Scanning Unit
5
Unlock the Scanning Unit
1Peel the caution seal from the scanner.
2Gently turn the scanner over.
3Push the lock switch toward the 
unlock mark ( ). 
4Return the scanner to a horizontal position.
• Unlock the scanning unit before connecting the scanner to the computer. If it is left 
locked, a malfunction or other problem may occur.
• When carrying or transporting the scanner in a vehicle, always lock the scanning unit by 
pushing the lock switch toward the lock mark ( )....

Connect the Scanner
6
Connect the Scanner
1Peel the caution seals from the scanner.
2Connect the scanner to the computer with the supplied USB interface cable.
Using the Scanner in the Upright Position
Installing the Stand Removing the Stand 
Positioning an item
• Make sure that the scanning unit is unlocked. (P.5)
• Only use the USB interface cable provided with the scanner. Use of other cables may 
lead to a malfunction.
• The scanner does not have a power switch. The power is activated as soon as the...

Try Scanning
7
2Select [Start], [Programs] or [All 
Programs], [ArcSoft PhotoStudio] and 
[PhotoStudio 5]. 
PhotoStudio will start.
Windows
Try Scanning 
The following steps explain how to scan with ArcSoft PhotoStudio.
1Place a photo or a picture on the document 
glass of the scanner by aligning its top edge 
with the alignment mark, and close the 
document cover.
Alignment 
Mark
To pBottom
2Double-click the [Applications (Mac OS 
9)] and [PhotoStudio] folder and the 
[PhotoStudio] icon.
PhotoStudio...

Try Scanning
8
3Click the Acquire icon   or click the 
[File] menu and select [Acquire].
ScanGear CS will start.
If an error message appears, click the [File] 
menu, choose [Select Source], select your 
scanner model name and click the [Select] 
button.
Windows
3Click the Acquire icon   or click the 
[File] menu and select [Import...].
When the [Select Source] dialog displays, select 
[ScanGear CS 7.2] and click the [OK] button. 
ScanGear CS will start.
Macintosh
4In the [Select source] category, select...