Canon scanner CanoScan LiDE 220 User Manual

CloseCloses ScanGear (scanner driver).
(2) Toolbar
You can adjust or rotate preview images. The buttons displayed on the Toolbar vary by view.
In thumbnail view:
In whole image view:
 (Thumbnail) /  (Whole Image)
Switches the view in the Preview area.
(3) Preview Area
 (Rotate Left)
Rotates the preview image 90 degrees counter-clockwise.
•
The result will be reflected in the scanned image.
•
The image returns to its original state when you preview again.
 (Rotate Right)
Rotates the preview image 90...

 (Select All Cropping Frames)
Available when two or more cropping frames are specified.
Turns the cropping frames into thick broken lines and applies the settings to all of them.
 (Remove Cropping Frame)
Removes the selected cropping frame.
 (Information)
Displays the version of ScanGear and the current scan settings (document type, etc.).
 (Open Guide)
Opens this page.
(3) Preview Area This is where a trial image appears after you click  Preview. You can also check the results of the settings
(image...

When  (Whole Image) is displayed on the Toolbar:
Items on the Platen are scanned and displayed as a single image. All portions in the cropping frames will
be scanned.
Note
•
You can specify the cropping frame on the displayed image. In thumbnail view, you can only create one cropping frame per image. In whole image view, you can create multiple cropping frames.
Adjusting Cropping Frames (ScanGear)
Related Topic
Scanning in Basic Mode
163 

Advanced Mode TabThis mode allows you to make advanced scan settings such as the color mode, output resolution, image
brightness, and color tone.
This section describes the settings and functions available on the  Advanced Mode tab.
(1) Settings and Operation Buttons
(2) Toolbar
(3) Preview Area
Note
•
The displayed items vary by document type and view.
(1) Settings and Operation Buttons Favorite Settings You can name and save a group of settings (Input Settings, Output Settings, Image Settings, and...

When you click Save, the item appears in the  Favorite Settings list and can be selected, along with
the predefined items.
To delete an item, select it in  Favorite Settings List and click Delete. Click Save to save the settings
displayed in  Favorite Settings List .
Note
•
You can set Add/Delete...  in Favorite Settings  after preview.
•
Save up to 10 items.
Input Settings
Specify the input settings such as the document type and size.
Output SettingsSpecify the output settings such as the output...

ScanStarts scanning.
Note
•
When scanning starts, the progress will be displayed. Click  Cancel to cancel the scan.
•
When scanning is completed, a dialog box prompting you to select the next action may appear.
Follow the prompt to complete. For details, refer to  Status of ScanGear dialog after scanning
in 
Scan Tab  (Preferences  dialog box).
•
It will take time to process the images if the total size of the scanned images exceeds a certain
size. In that case, a warning message appears; it is...

(3) Preview Area
 (Clear)
Deletes the preview image from the Preview area.
It also resets the Toolbar and color adjustment settings.
 (Crop)
Allows you to specify the scan area by dragging the mouse.
 (Move Image)
Allows you to drag the image until the part you want to see is displayed when an image enlarged in
the Preview area does not fit in the screen. You can also move the image using the scroll bars.
 (Enlarge/Reduce)
Allows you to zoom in on the Preview area by clicking the image. Right-click the...

 (Remove Cropping Frame)
Removes the selected cropping frame.
 (Information)
Displays the version of ScanGear and the current scan settings (document type, etc.).
 (Open Guide)
Opens this page.
(3) Preview Area This is where a trial image appears after you click  Preview. You can also check the results of the settings
(image corrections, color adjustments, etc.) made in "
(1) Settings and Operation Buttons ."
When 
 (Thumbnail) is displayed on the Toolbar:
Cropping frames are specified according...

Note
•
You can specify the cropping frame on the displayed image. In thumbnail view, you can only createone cropping frame per image. In whole image view, you can create multiple cropping frames.
Adjusting Cropping Frames (ScanGear)
Related Topic
Scanning in Advanced Mode
169 

Input Settings
Input Settings allows you to set the following items:
Select Source The type of document to be scanned is displayed.
Paper Size Select the size of the document to be scanned. This setting is available in whole image view only.
When you select a size, the Preview area size changes accordingly.
Important
•
Some applications have a limit to the amount of scan data they can receive. Available scan range
is as follows.
•
21000 pixels x 30000 pixels or less (and 1.8 GB or less in data size)
•
If...