Canon scanner CanoScan FB 630UI User Manual
Have a look at the manual Canon scanner CanoScan FB 630UI User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Top Page
Glossary
Contents
Index
31 chapter 4
The ScanGear CS
Settings
The Tabs and Sheets
Click the Main tab, Tone tab, or the Scanner tab to open the Main
sheet, Tone sheet, or Scanner sheet. Use the settings on each
sheet to perform important settings for scanning.
The name of your scanner (FB630U or FB636U) will
appear on the Scanner tab.
Status Bar
Reading from left to right, the status bar displays the following
important information:
¥ Message Area: Displays messages about the current status of
the driver or a simple explanation of the button or setting
you point to.
¥ Scan Mode: Displays the option selected for the Scan Mode
on the Main sheet.
¥ Resolution: Displays the option selected for Scan Resolution
on the Main sheet.
¥ Width: Displays the current Width setting in the Selection
box on the Main sheet.
¥ Height: Displays the current Height setting in the Selection
box on the Main sheet.
¥ Size: Displays the file size of the uncompressed image with
the current settings you have selected.
4
5
Note
Top Page Glossary Contents Index 32 chapter 4 The ScanGear CS Settings Summary of the ScanGear CS Settings General Scanning Settings The general scanning settings set up the basic features for the scanning job. The general scanning settings are performed in the ScanGear CS main window. 1 2 4 53
Top Page
Glossary
Contents
Index
33 chapter 4
The ScanGear CS
Settings
Selecting the Scan Mode
On the Main sheet click the down-arrow for Scan Mode and select
Black and White, Grayscale, Color, High Definition Color, or Text
Enhanced. (F41)
Selecting scanning resolution
On the Main sheet click the down-arrow for Scan Resolution and
select the resolution setting from the pull-down list. If you select
Custom for the Scan Resolution setting, you can specify custom
resolution settings. (F42)
Displaying the rulers in the Preview Area
Click the Rulers button in the toolbar to switch the rulers display
in the Preview Area on and off. Set the units for the rulers with
the Units item on the Main sheet. (F44)
Scaling the size of the scanned image
On the Main sheet, use the Scale entry box to enter a percentage
(25%~200%) to reduce or enlarge the size of the image then click
the Scan button. The scanned image is output at the scale you
selected. (F44)
Selecting the paper size of the original
On the Scanner sheet, click the down-arrow for Paper Size and
select a standard paper size from the pull-down list to match the
size of the original on the scanner platen. (F58)1
2
3
4
5
Top Page
Glossary
Contents
Index
34 chapter 4
The ScanGear CS
Settings
Image Manipulation Settings
These settings allow you to crop, size, or change the position of
the image for scanning.
Cropping an image
Click the Crop button in the toolbar and drag the pointer to draw
a rectangle around the area of the image you want to crop. You
can use the Auto Crop button to size the rectangle exactly around
the object enclosed by the rectangle. (F38)
Moving an enlarged image
With an image enlarged with the Zoom Tool button in the
Preview Area, click the Move Image button in the toolbar. Drag
the hand-pointer in any direction to scroll the image in the
Preview Area. (F38)
Enlarging/reducing size of an image
Click the Zoom Tool button and click the left mouse button to
enlarge the image size or click the right mouse button to reduce
the image size. Only the displayed image is enlarged or reduced
in the Preview area. (F39)
Inverting an image
Click the Negative/Positive button in the toolbar to create a
negative effect by reversing colors in the image. (F39)
Mirroring an image
Click the Mirror button in the toolbar to flip the image
horizontally. (F39)
Top Page
Glossary
Contents
Index
35 chapter 4
The ScanGear CS
Settings
Rotating an image
Click the Rotate Left or Rotate Right button in the toolbar to
rotate the image left or right 90 degrees. (F40)
Image Enhancement Settings
The enhancement settings provide a range of professional tools
for adjusting color and tone for scanning.
Adjusting color tone automatically
On the Preview Area toolbar or the Tone sheet, click the Auto
Tone button to have ScanGear CS correct color tones
automatically. (F48)
Adjusting contrast and brightness
On the Tone sheet, click the Contrast/Brightness button, then
use the Contrast and Brightness slide bars to adjust the
overall contrast and brightness of the image. (F49)
Adjusting mid-tone range (gamma)
On the Tone sheet, click the Gamma button then use the
Gamma slide bar to adjust the gamma setting. (F50)
Adjusting intensity of tone
On the Tone sheet, click the Histogram button then drag the
triangles at the bottom of the graph to change the intensity
of the tones. (F52)
Top Page Glossary Contents Index 36 chapter 4 The ScanGear CS Settings Adjusting output color (RGB) On the Tone sheet, click the Special Tone Curves button. Then on the graph, click a point on the curve to define a point and drag it in any direction to adjust the color output of the color selected in the Channel box. (F54) Setting Threshold On the Main sheet, click the down-arrow for Scan Mode and select Black and White from the pull-down list. On the Scanner sheet, drag the Threshold slide bar to the left or right to adjust the setting. The adjusted Threshold setting will be reflected in the next preview or scan.(F59) Improving image quality On the Scanner sheet, click the Descreen check box to switch on moirŽ reduction to improve the overall quality of the image. (F59)
Top Page Glossary Contents Index 1-37 chapter 5 What is on the ScanGear CS Main Window? The Toolbar The Main Sheet The Tone Sheet The Scanner Sheet
Top Page Glossary Contents Index 38 chapter 5 What is on the ScanGear CS Main Window? The Toolbar Buttons on the toolbar help you to perform important tasks, like cropping images, moving images, zooming, and so on. Crop Button Click the Crop button and drag the pointer in any direction to draw a rectangle around the area you want to select for scanning. This reduces the time it takes to scan an image because you are pre-scanning or scanning only the necessary section of the original, not the whole area. To un-crop the image, simply click outside the cropped area. You can drag the selected area to another location or drag the handles on the borders to enlarge or reduce the area. Move Image Button Use the Move Image button to scroll the image up/down or left/ right when the previewed image has been enlarged with the Zoom Tool button and is too large to be viewed all at once. Click the Move Image button and drag the image with the hand image pointer. The Move Image button is not available when the previewed image has not been enlarged and is displayed entirely in the Preview Area. Note
Top Page Glossary Contents Index 39 chapter 5 What is on the ScanGear CS Main Window? Zoom Tool Button Click the Zoom Tool button and then click the left or right mouse button to increase or decrease the current magnification of the image. The final scanned image will not be affected by this operation. To increase the magnification of the image, click the Zoom Tool button then click the left mouse button on the area of the previewed image to view. You can repeat this procedure to magnify the image up to 4 times its previewed size. To decrease the magnification of the image, click the Zoom Tool button and click the right mouse on the magnified image. Auto Crop Button Click the Crop button and draw a rectangle around the part of the image that you want to scan. Then, click the Auto Crop button to size the rectangle for the best fit around the object enclosed by the rectangle. Clicking only the Auto Crop button selects the entire image in the Preview area. Negative/Positive Button Click the Negative/Positive button to invert the colors and create a negative of the image. Mirror Button Click the Mirror button to flip the image horizontally like a mirror image.
Top Page Glossary Contents Index 40 chapter 5 What is on the ScanGear CS Main Window? Rotate Left Button Click the Rotate Left button to rotate a scanned image left 90 degrees (counterclockwise). Click this button repeatedly to continue rotating the image left. Rotate Right Button Click the Rotate Right button to rotate a scanned image right 90 degrees (clockwise). Click this button repeatedly to continue rotating the image right. Rulers Button Click the Rulers button to display rulers in the Preview Area to help with sizing and cropping images. To select the units for rulers, click the down-arrow for Units on the Main sheet and then select the desired measurement units from the pull-down list. Auto Tone Button Click the Auto Tone button to have ScanGear CS automatically adjust the tone of a pre-scanned color image. The Auto Tone feature is on when the button on the toolbar is depressed. The Auto Tone button is available only when Color or High Definition Color has been selected for Scan Mode on the Main sheet. Help Button Click the Help button to display the ScanGear CS on-line Help.