Canon scanner CanoScan D1250U2F User Manual

21
chapter 3
What is on the
screen?
Glossary Contents
Index
Paper Size
This item is displayed only when [Platen] has been selected for the Imag\
e
Source. Specifies the paper size of the image to be scanned.
Business Card, L Portrait, L Landscape, Postcard,  LL Portrait,
LL Landscape, Statement, B5, Executive, A4, Letter, Full Platen
•Changing the Paper Size clears the Preview area and
clears all settings set with the Toolbar and Tone sheet
buttons.
Width
Displays the width of the scanning area currently...

22
chapter 3
What is on the
screen?
Glossary Contents
Index
Auto Tone
Click the Apply button to have ScanGear CS-U automatically adjust the
tone of a pre-scanned color image within the cropped area. The Auto Tone
is available only when Color or Grayscale has been selected on the Main
sheet and when Canon ColorGear Color Matching is not selected on the
Scanner sheet.
To
 cancel the Auto Tone, click the Reset button.
Magazine-Reduce Moiré
Click this check box if you want ScanGear CS-U to conduct moiré...

23
chapter 3
What is on the
screen?
Glossary Contents
IndexAdvanced Mode
The Main Sheet
When you click on the Main tab, the Main sheet opens. The default settin\
g
of ScanGear CS-U displays the Main sheet.
Color Mode
The Color Mode determines how the original will be scanned:  the options\
are Black and White, Grayscale, Color, etc. Click the down-arrow and select
a setting from the drop-down list.
• Black and White   The image is scanned in black and white.
•  Grayscale   The image is scanned in black...

24
chapter 3
What is on the
screen?
Glossary Contents
Index•
The Text Enhanced selection requires more time than
the Black and White setting because digitization of the
scanned image is performed after scanning it in
Grayscale.
• Selecting the Color Mode setting automatically resets
the Tone tab settings.
Output Resolution
Click the down-arrow and select one of the pre-set Resolution settings to
set the resolution for the scanning job. The default setting is 75 dpi.
Resolution can be set within the range...

25
chapter 3
What is on the
screen?
Glossary Contents
Index
Selection
Use the Selection options to set the exact size of the image input.
•To select the area to scan, use the Crop button or Auto
Crop button, or enter the desired dimensions in the text
box.
•  Width and Height   The width and height of the current selection
are shown, or if there is no selection, the maximum input size is
shown as measured from the upper left corner of the image in the
Preview Area and based on the current paper size. To...

26
chapter 3
What is on the
screen?
Glossary Contents
Index
Print Size
Use the Print size selection to set the output image size. Varying one of
W
idth, Height or Scale options makes the others change automatically.
Since the output resolution remains as specified in the Output Resolution
setting, any change to the Width, Height or Scale options changes the
scanning resolution accordingly.
• Width and Height   Set the width and height of the image size after
scan according to the Unit in the Selection...

27
chapter 3
What is on the
screen?
Glossary Contents
IndexThe Settings Sheet
When you click on the Settings tab, the Settings sheet opens.
Image Source
Specifies the source of the original.
•Platen   Scans photos or documents.
• Film   Scans films. (CanoScan D1250U2F only)
•Changing the Image Source clears the image from the
Preview area and clears all settings set with the Toolbar
and Tone sheet buttons.
Paper Size
This item is displayed only when [Platen] has been selected as the Image\
Source....

28
chapter 3
What is on the
screen?
Glossary Contents
Index•
Changing the Paper Size clears the Preview area and
clears all settings set with the Toolbar or the buttons on
the Tone sheet.
Film Type (CanoScan D1250U2F only)
This item is displayed only when [Film] has been selected as the Image
Source. Specifies the film type to be scanned. Color Negatives, Color Positives, B&W Negatives, B&W Positives
Filter Processing •Descreen
Click this check box if you want ScanGear CS-U to conduct moiré
r eduction to...

29
chapter 3
What is on the
screen?
Glossary Contents
Index
Reduce Dust and Scratches
This item is grayed out when [Film] has been selected as the Image Source.
This function automatically produces a scanned photo image with the area
under small bits of dirt or scratches reduced.
The available settings are [None], [Soft], [Normal] and [Hard].
•
Soft Compensates for high-contrast dirt and scratches. At this
setting, it may not be possible to restore areas under large
flecks of dirt or scratches.
• Normal...

30
chapter 3
What is on the
screen?
Glossary Contents
Index
Color Settings
When the Color Mode is set to Color, you can select the color adjusting
method for scanning from Recommended or Canon ColorGear Color
Matching. The default setting is Recommended.
• RecommendedReproduces the colors of the scanned item vividly on a computer
display. You are advised to use this mode under normal
circumstances.
• Canon ColorGear Color Matching Automatically matches the color settings of the scanner, computer
display...