Canon scanner CanoScan 9000F User Manual
Have a look at the manual Canon scanner CanoScan 9000F User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Try Scanning 9 Tr y Scanning This section explains the basic scanning procedures using MP Navigator EX. 1Open the document cover to make sure the protective sheet is put on. 2Place a color photo document with the side to be scanned facing down on the platen glass at least 1 cm (0.4 in.) away from the edges of the platen glass, and then close the document cover. 3Start MP Navigator EX. For Windows: Double-click the Canon Solution Menu icon, then click Scan/import photos or documents. For Macintosh: Click the Solution Menu icon in the Dock, then click Scan/import photos or documents. 4Click Photos/Documents (Platen) (*1). 5Select Color Photo in Document Type. 6Click Scan to start scanning. 7When prompted that the scanning completed, click Exit. 8Click Save to save the image and close MP Navigator EX (*2). • Do not move the scanner while it is operating. • Do not see the light source directly during a scan job. • For more information on scanning using MP Navigator EX, bundled applications, and troubleshooting, see On- Screen Manual. To open On-Screen Manual, double-click the on-screen manual icon on the desktop, or click on in ScanGear or MP Navigator EX. Bottom To pprotective sheet *1 *2
Using the Scanner Buttons 10 Using the Scanner Buttons Scanner buttons allow you to copy, scan, e-mail, and save scanned images in PDF format with a press of a button. Simply place your document on the scanner, and then press the scanner button for the required function. For more information, see On-Screen Manual. • Before using scanner buttons, make sure that the required software programs for each function are installed on your computer using the supplied CD-ROM. See Setup CD-ROM on page 3. If the scanner buttons do not work properly, see Troubleshooting in On-Screen Manual. •For Macintosh: If you have not restarted the computer since installing the software, you need to restart the computer before using the scanner buttons first. • When you press the scanner buttons, the POWER lamp gets blinking. AUTO SCAN Button Discriminates the document type automatically, then scans and saves it with appropriate settings. PDF ButtonsPDF buttons allow you to easily create PDF files according to your needs. Note that these buttons are not labeled on the scanner. COLOR Button Scans color images in A4 or Letter size* at 300 dpi by default. CUSTOM Button Scans images in user-specified settings. BLACK & WHITE Button Scans black & white images in A4 or Letter size* at 300 dpi by default. FINISH Button Ends the operation and saves the scanned image in a PDF file. COPY Button Prints (copies) the scanned image with a printer. E-MAIL Button Attaches the scanned image to a new e-mail message. *The size may differ depending on your system environment.
Scanning with MP Navigator EX 11 Scanning with MP Navigator EX MP Navigator EX enables you to perform various tasks, such as compositing images, scanning with the scanner driver (ScanGear), and correcting/editing scanned images, as well as simply scanning. Starting MP Navigator EX 1Click Scan/import photos or documents in the Solution Menu. You can also start it by following procedure. For Windows: Select Start – (All) Programs – Canon Utilities – MP Navigator EX 3.1, and click MP Navigator EX 3.1. For Macintosh: Open Applications – Canon Utilities folders, then double-click the MP Navigator EX 3.1 icon. The navigation mode window of MP Navigator EX is displayed. Features of MP Navigator EX MP Navigator EX is constituted of the following three sheets by the function. • For more information on MP Navigator EX, see On-Screen Manual. Scan/Import Documents or Images sheetView & Use Images on your Computer sheet Custom Scan with One-click sheet
Scanning Film 12 Scanning Film This scanner can scan 35 mm film (film strip or slide) and 120 format film. Follow the procedure below when scanning film. 1Remove the protective sheet from the document cover. Press and hold the lever at the top of the protective sheet c while you pull the sheet outward and detach it d. 2Insert the film into the Film Guide. 35 mm Film Strips cOpen the Film Holder on the Film Guide, place the film face down. dClose the Film Holder. eAlign the Film Guide’s tab with the FILM symbol on the platen glass of the scanner. • Store the protective sheet in a safe place so that it will not get bent or broken. • Always put the protective sheet back when you are not scanning film to protect the light source in the document cover. • Use a blower brush to remove any dust from the film, which will affect the image quality, and take care to hold the film by its edges to avoid transferring dirt or fingerprints to it. • Do not block the Calibration Slot on the Film Guide when scanning film. Colors will not be scanned correctly if the Calibration Slot is obstructed. • Close the Film Guide securely. Press lightly until it clicks into place. Ensure that there is no gap between the edge of the film and the Film Guide on the side near the Calibration Slot. protective sheet light source Film Holder Calibration Slot
Scanning Film 13 35 mm Slides cAlign the Film Guide’s tab with the FILM symbol on the platen glass of the scanner. dPlace a slide or slides face down (correctly viewed from below) in the Film Guide as shown in the figure on the right. 120 Format Films cAlign the Film Guide’s tab with the FILM symbol on the platen glass of the scanner, then open the Film Holder and remove the Film Retainer Sheet. dPlace the film face down. eClose the Film Holder. • Leave a gap of 5 mm (0.2 in.) or greater between films when placing two or more 120 format films on the platen glass. • Ensure that there is no gap between the edge of the film and the Film Guide on the side near the Calibration Slot. Calibration Slot Calibration Slot
Scanning Film 14 3Close the document cover. 4Start MP Navigator EX. Follow the step 3 in Try Scanning on page 9. 5Click Film. Using a Film Retainer Sheet Curled film strips can stick to the platen glass and cause a pattern of rings called Newton Rings to appear on the scanned image. If this occurs, scan using the supplied Film Retainer Sheet as shown in the diagram. (A)Scan with the Film Retainer Sheet inserted beneath the film. (B)If Newton Rings still appear after following Instruction (A), turn the film strip over and place it in the Film Holder with the Film Retainer Sheet on top so that the film edges are held down for scanning. Then preview the image in ScanGear and click the (Mirror) button to reverse the image before initiating the final scan. To avoid damaging the film, always place the glossy side (the side without an illustration) of the Film Retainer Sheet against the film. (A) (B) 120 Format Film Film Retainer Sheet Film Holder With its glossy side facing upward, slip the Film Retainer Sheet under the film. Hold the film edges down by placing the Film Retainer Sheet on top with its glossy side facing downward.
Scanning Film 15 6Click Scan. 7When the preview is displayed, place a check mark beside the number(s) of the frame(s) you want to scan, and then click Scan to start scanning. 8When prompted that the scanning completed, click Exit. 9Click Save to save the images and close MP Navigator EX. Do not move the scanner while it is operating. Do not move the scanner while it is operating. • Do not leave the film strip in the Film Guide for an extended period of time as heat from the unit may damage the film. • For more information on scanning film, see “Scanning Film” in On-Screen Manual. • When you finished scanning films, put the protective sheet back on the document cover. Insert the tab on the bottom of the protective sheet into the document cover, and push the top of the protective sheet to fit in until it clicks.
Specifications 16 Specifications *1Optical Resolution represents the maximum sampling rate based on ISO 14473.*2For film scanning only.*3The fastest speed in Hi-Speed USB mode on Windows PC. Transfer time is not included. Scanning speed varies according to the document types, scan settings, or specifications of the computer. *4USB connection to PC. • Specifications are subject to change without notice. Model Name: K10346 (CanoScan 9000F)CanoScan 9000F Scanner TypeFlatbed Sensor TypeCCD 12-line color Light SourceWhite LED Optical Resolution *1Transparencies: 9600 x 9600 dpi Reflectives: 4800 x 4800 dpi Selectable Resolution25-19200 dpi (ScanGear) Scanning Bit DepthColor 48 bit input (16 bit input for each color (RGB)) 48 bit or 24 bit output (16 bit or 8 bit output for each color (RGB)) Grayscale48 bit input (16 bit input for each color (RGB)) 16 bit *2 or 8 bit output Interface Hi-Speed USB *3 Maximum Document SizeA4/Letter: 216 x 297 mm Film Type/Number of Frames35 mm strip (12 frames max)/35 mm slide (4 frames max) 120 format film: max. 6 x 22 cm (filmstrip only) Scanner Buttons7 buttons (AUTO SCAN, PDF x 4, COPY, E-MAIL) Operating RangeTemperature10 °C to 35 °C (50 °F to 95 °F) Humidity10 % to 90 % RH, 20 % to 80 % RH for film scanning without condensation formation Power RequirementsAC 100-240 V, 50/60 Hz Power ConsumptionIn operation: 15 W maximum, Stand-by: 0.9 W *4, Off: 0.5 W*4 Exterior Dimensions (W) x (D) x (H)270 x 480 x 111 mm (10.7 x 18.9 x 4.4 in.) WeightApproximately 4.6 kg (10.1 lbs.)
Quick Start Guide Quick Start Guide QT5-2915-V01 ©CANON INC. 2010 PRINTED IN THAILAND XXXXXXXX Please read this guide before operating this scanner. After you finish reading this guide, store it in a safe place for future reference. Table of Contents Safety Precautions.............................. 1 Using the Scanner Buttons ................. 10 Package Contents............................... 3 Scanning with MP Navigator EX ......... 11 Installing the Software......................... 4 Scanning Film ..................................... 12 Preparing the Scanner ........................ 7 Specifications ...................................... 16 Try Scanning ....................................... 9 CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 11042 U.S.A. CANON AUSTRALIA PTY LTD 1 Thomas Holt Drive, North Ryde, Sydney N.S.W. 2113, Australia CANON NEW ZEALAND LIMITED Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand