Canon scanner CanoScan 9000F Mark II User Manual

							1
Quick Start Guide Quick Start Guide
Please read this guide before operating this scanner. After you finish reading this guide, 
store it in a safe place for future reference.
Table of Contents
Safety Precautions .............................. 2 Package Contents ............................... 3
Preparing the Scanner ........................ 4 Installing the Software ......................... 5 
						

							1
* Screens are based on Windows 7 operating system Home Premium and Mac OS X 10.7.x.
Actual screens may differ depending on the OS version.
• Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/
or other countries.
• Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.
• All other company names and products mentioned herein may be trademarks or 
registered trademarks of their respective companies.
Notes for Energy Saving Setting
For purpose of energy saving, this product will be automatically turned off after designated
period without operation (The Auto Power Off function).
For instructions on how to change the setting, refer to the On-Screen Manual.
Turning the Power Off
To turn the scanner off, be sure to press the ON button. Check the POWER lamp goes off,
and then unplug the power cord.
If you unplug the power cord while the POWER lamp is lighting or blinking, the scanning unit
does not move correctly
.
Warning
When you use this product, you should pay attention to the following legal issues:
• Scanning of certain documents, such as bank notes (bank bills), government bonds 
and public certificates, may be prohibited by law and may result in criminal and/or civil 
liability.
• You may be required under law to obtain authorization from a person possessing 
copyrights or other legal rights to the item being scanned. 
If you are uncertain of the legality of scanning any particular item, you should consult 
your legal adviser in advance.
The socket-outlet shall be installed near the equipment and shall be easily accessible. 
						

							Safety Precautions
2
Safety Precautions
Make sure to read following precautions before using the scanner and accessories.
Read the On-Screen Manual for precautions against product damages.
WA R N I N G
Indicates a warning concerning operations that may lead to death or injury to persons if not
performed correctly. In order to use the scanner safely, always pay attention to these
warnings.
WA R N I N G
This product emits low level magnetic flux. If you use a cardiac pacemaker and feel
abnormalities, please move away from this product and consult your doctor.
WA R N I N G
Fire or electrical shock may result when following acts are carried out.
• Do not place the scanner near flammable liquids such as alcohol or thinners.
• Do not use cables other than the one supplied.
• Do not plug the power cord into outlets with voltages other than the specified voltages.
• Always plug the power cord in all the way.
• Do not plug in /unplug the power cord with wet hands.
• Do not pull or excessively bend the power cord.
• Do not place heavy objects on the power cord. 
• Do not twist or tie the power cord.
• Do not connect excessive numbers of plugs into one electrical outlet.
• Do not use multiple extension cords.
• If lightning strikes in your neighborhood, unplug the power cord from the outlet and refrain 
from using it.
• When cleaning the scanner, always unplug the power cord. Do not use flammable liquids 
such as alcohol, benzene or thinners. Wipe with a soft dry cloth.
• Do not take apart or modify the scanner and supplies.
Unplug the power cord once a month to see if the cord/plug shows anything unusual such as
heat, rust, bent, scratch and split and so on. Unplug the power cord and call for service if
above is observed since they may lead to a fire or an electric shock afterwards.
If you hear unusual noises, see smoke, feel excessive heat, smell anything unusual, drop
metallic part or spill liquid into the scanner, immediately unplug the power cord and call for
service. Continued use of the scanner may result in fire or electrical shock. 
						

							Package Contents
3
Package Contents
Scanner and Accessories
Documentation
•Quick Start Guide (this document)
•Additional Documents
Scanner USB Cable
Film Guide
(for 120 format film) Film Guides
 (for 35 mm film strip/slide)Power CordSetup CD-ROM 
						

							Preparing the Scanner
4
Preparing the Scanner
1Peel the shipping tapes off the scanner.
2Open the document cover and slide the scanner lock switch toward the unlock mark 
().
3Close the document cover.
4Connect the supplied power cord to the scanner.
5Plug the power cord into the electrical outlet.
• The document cover is locked temporarily at an angle of about 50 degrees.
• Handle the scanner with both hands. Be careful not to drop the scanner.
• When you carry or transport the scanner, press the ON button to turn the power off, and then 
make sure to slide the scanner lock switch toward the lock mark ( ) to fasten the scanning 
unit.
• Only use the power cord provided with the scanner. Use of other cables may lead to a 
malfunction.
• Always attach the power cord to the scanner before plugging into the electrical outlet. 
Reversing this order may lead to malfunctions.
Unlock Mark 
						

							Installing the Software
5
Installing the Software
1Insert the CD-ROM into the 
computer.
2Follow the on-screen 
instructions to proceed.
To select a language, click 
Language.
• Quit all applications before installation.
• Log on using an administrator account.
• Internet connection may be required during the installation. Connection fees apply.
• Internet connection is required during software installation. Connection fees apply.
If the USB cable is already 
connected, unplug it. If a 
message appears on the 
computer, click Cancel.
If the CD-ROM does not autorun:
Double-click (My) Computer > CD-
ROM icon > MSETUP4.EXE.
Double-click the CD-ROM icon on 
the desktop.
To complete the installation, follow the on-screen instructions on the computer.
During installation, you will be prompted to connect the USB cable and turn the power on.
After installation is completed, connect the USB cable and turn the power on. 
						

							Installing the Software
6 Use the On-Screen Manual on the Computer
For more information about the functions and operation of the software and also the
troubleshooting tips, refer to the On-Screen Manual. You can start the On-Screen
Manual from the Quick Menu.
Starting the On-Screen Manual
1Start the Quick Menu.
Double-click the Quick Menu shortcut icon on the 
desktop.
Click the Quick Menu icon in the Dock.
2Click the on-screen manual icon on the Quick Menu.
• It requires the installations of the Quick Menu and the On-Screen Manual.
Types of Document Supported
• A sheet of photo document and CD/DVD
• Several sheets of photo documents and CD/DVD
• Magazine and book
•Films
There are various ways to place documents in accordance with the document type and
number of documents. For details, refer to the On-Screen Manual. 
						

							1
CANON U.S.A. INC.
www.usa.canon.com/
CANON AUSTRALIA PTY LTD
canon.com.au
CANON NEW ZEALAND LIMITED
canon.co.nz
QT5-5868-V02 XXXXXXXX © CANON INC. 2014 PRINTED IN XXXXXXXX