Home > Canon > Scanner > Canon scanner CanoScan 4200F User Manual

Canon scanner CanoScan 4200F User Manual

Here you can view all the pages of manual Canon scanner CanoScan 4200F User Manual. The Canon manuals for Scanner are available online for free. You can easily download all the documents as PDF.

Page 11

Scanning Film
11
English
Scanning Film
You can scan 35 mm film (film strip or slides) with this scanner.
Positioning the Film 
Use the following procedures to insert the film into the Film Guide built into the document cover.
1Remove the protective sheet from the document cover. 
Slide the protective sheet up to remove it.  
When you finish scanning, put the protective sheet back by aligning it with the grooves in the document 
cover and sliding it downward into place.
2Remove the Film Guide from the...

Page 12

Scanning Film
12
3Insert a fingernail into the slot in the Film Guide and open the Film Holder.
4Insert the film into the Film Guide. 
Place the film face down with the frames in reverse order. Close the film holder. 
• Hold the film by the edges with your fingertips to avoid getting fingerprints or dirt 
on the film surface. 
• Use a blower brush to remove any dust from the film, document glass or light source 
unit.
• Do not block the calibration slot on the Film Guide when you are scanning film....

Page 13

Scanning Film
13
English
5Return the Film Guide to the document cover.
Hold the document cover and c insert the bottom edge of the Film Guide into the bottom groove in the 
document cover, and then 
d tilt the top of the Film Guide up into the document cover until it locks 
securely into place with a click.
6Close the document cover.
When you close the document cover, check the document glass to ensure that there are no photographs 
or documents left upon it.
cd 

Page 14

Scanning Film
14
Scanning Film
The following steps explain how to scan the film with ArcSoft PhotoStudio.
1Start ArcSoft PhotoStudio.
Refer to step 2 on page 7.
2Start ScanGear CS.
Refer to step 4 on page 8.
3Select the [Select Source].
You can select from the following options for films.
Negative Film (Color) / Positive Film (Color)
4Click [Preview].
ScanGear CS will display the preview image(s).
5Place a check mark beside the number(s) of the 
frame(s) to be scanned.
By default, a check mark appears...

Page 15

Scanning Film
15
English
7Select the [Output Size].
You can select from the following options.
• If you selected [Print ] in Step 6, you can select Flexible, 
4x6, A4 and Letter to match the size of the paper for 
printing.
• If you selected [Image display] in Step 6, you can select 
Flexible, 640 x 480, 800 x 600, 1024 x 768, 1600 x 1200 
and 2048 x 1536 to match the sizes used by computer 
monitors and digital cameras.
8Click [Scan].
The final scan will start.
When the scan is complete, click the...

Page 16

Specifications
16
Specifications
*1 16 bit output supported for film scanning only.*2 The fastest speed in USB 2.0 Hi-Speed mode on Windows PC. Transfer time to computer is not included.*3 Calibration processing time is not included.*4 Slides must be less than 2 mm thick.*5 AC adapter type varies according to the region in which the scanner is purchased.
• Specifications are subject to change without notice.
Upgrading to USB 2.0
To upgrade a computer to the USB 2.0 standard, please use one the following...

Page 17

System Information
17
English
System Information
This form should be used to record the operating environment for the purchased scanner. 
If any problems occur with the scanner, you will need this information when you contact our Customer 
Support Help Desk. Be sure to record the information and store it in a safe location.
• This information is also required to request a repair under warranty. Make sure you record the 
information and store it in a safe location.
• Guaranteed servicing for this...
Start reading Canon scanner CanoScan 4200F User Manual

Related Manuals for Canon scanner CanoScan 4200F User Manual

All Canon manuals