Canon scanner CanoScan 3000F User Manual
Here you can view all the pages of manual Canon scanner CanoScan 3000F User Manual. The Canon manuals for Scanner are available online for free. You can easily download all the documents as PDF.
Page 11
![Page 11
9
Using the Scanner Buttons
You can use the three convenient buttons on the front panel of the scanner to scan and perform related
tasks easily with a single touch of the button. Place an item on the document glass of the scanner before
pressing a button.
• To use these buttons, ScanGear CS, CanoScan Toolbox and ArcSoft PhotoBase should be
installed from the CanoScan Setup Utility CD-ROM.
COPYE-MAIL SCAN
SCAN Button
To open the scanned image in the PhotoBase
window:
1Press the [SCAN] button.
2The...](http://img.usermanuals.tech/thumb/14/1183/w300_scanner-canoscan-3000f-1478284141_d-10.png "Page 11
9
Using the Scanner Buttons
You can use the three convenient buttons on the front panel of the scanner to scan and perform related
tasks easily with a single touch of the button. Place an item on the document glass of the scanner before
pressing a button.
• To use these buttons, ScanGear CS, CanoScan Toolbox and ArcSoft PhotoBase should be
installed from the CanoScan Setup Utility CD-ROM.
COPYE-MAIL SCAN
SCAN Button
To open the scanned image in the PhotoBase
window:
1Press the [SCAN] button.
2The...")
9 Using the Scanner Buttons You can use the three convenient buttons on the front panel of the scanner to scan and perform related tasks easily with a single touch of the button. Place an item on the document glass of the scanner before pressing a button. • To use these buttons, ScanGear CS, CanoScan Toolbox and ArcSoft PhotoBase should be installed from the CanoScan Setup Utility CD-ROM. COPYE-MAIL SCAN SCAN Button To open the scanned image in the PhotoBase window: 1Press the [SCAN] button. 2The...
Page 12
10 Scanning Film (for CanoScan 3000F only) You can scan 35 mm film (one frame of strip or slide at a time) with CanoScan 3000F. Positioning the Film 1Remove the protective sheet from the document cover. Slide the protective sheet up to remove it. When you finish scanning, replace the protective sheet by aligning it with the grooves in the document cover and sliding it downward into place. 2Insert a fingernail into the slot in the film guide and remove the film holder. 3Place the film face down...
Page 13
11 Scanning Film (for CanoScan 3000F only) 4Clip the film holder back into the slots in the film guide for a 35 mm strip. Slides do not require the film holder to be closed. 5Place the loaded film guide in the correct position on the scanners document glass. 6Close the document cover. •The film guide has a calibration slot used by the scanner to calculate the color balance. The film cannot be scanned with the correct color balance if this slot is obstructed. Keep it clear. • You can purchase the...
Page 14
![Page 14
12
Scanning Film (for CanoScan 3000F only)
Scanning Film
The following steps explain how to scan the film with ArcSoft PhotoStudio.
1Select [Start], [Programs] or [All Programs], [ArcSoft PhotoStudio] and [PhotoStudio 5].
2Click the Acquire icon or click the [File] menu
and select [Acquire].
ScanGear CS will start.
If an error message appears, click the [File] menu, choose
[Select Source], select your scanner model name and click the
[Select] button.
3In the [Select source] category, select...](http://img.usermanuals.tech/thumb/14/1183/w300_scanner-canoscan-3000f-1478284141_d-13.png "Page 14
12
Scanning Film (for CanoScan 3000F only)
Scanning Film
The following steps explain how to scan the film with ArcSoft PhotoStudio.
1Select [Start], [Programs] or [All Programs], [ArcSoft PhotoStudio] and [PhotoStudio 5].
2Click the Acquire icon or click the [File] menu
and select [Acquire].
ScanGear CS will start.
If an error message appears, click the [File] menu, choose
[Select Source], select your scanner model name and click the
[Select] button.
3In the [Select source] category, select...")
12 Scanning Film (for CanoScan 3000F only) Scanning Film The following steps explain how to scan the film with ArcSoft PhotoStudio. 1Select [Start], [Programs] or [All Programs], [ArcSoft PhotoStudio] and [PhotoStudio 5]. 2Click the Acquire icon or click the [File] menu and select [Acquire]. ScanGear CS will start. If an error message appears, click the [File] menu, choose [Select Source], select your scanner model name and click the [Select] button. 3In the [Select source] category, select...
Page 15
![Page 15
13
Scanning Film (for CanoScan 3000F only)
The scanned image will appear in ArcSoft PhotoStudio.
7Save the scanned image.
Click the [File] menu and select [Save As]. Select the folder
where you wish to store the image file, enter a file name,
select a file type (JPEG format is recommended) and click
[Save].
8Click (close box) in the PhotoStudio window to
close it.
• If the scanner does not perform as described above, read the Troubleshooting section
of the Scanning Guide (HTML format manual).
•...](http://img.usermanuals.tech/thumb/14/1183/w300_scanner-canoscan-3000f-1478284141_d-14.png "Page 15
13
Scanning Film (for CanoScan 3000F only)
The scanned image will appear in ArcSoft PhotoStudio.
7Save the scanned image.
Click the [File] menu and select [Save As]. Select the folder
where you wish to store the image file, enter a file name,
select a file type (JPEG format is recommended) and click
[Save].
8Click (close box) in the PhotoStudio window to
close it.
• If the scanner does not perform as described above, read the Troubleshooting section
of the Scanning Guide (HTML format manual).
•...")
13 Scanning Film (for CanoScan 3000F only) The scanned image will appear in ArcSoft PhotoStudio. 7Save the scanned image. Click the [File] menu and select [Save As]. Select the folder where you wish to store the image file, enter a file name, select a file type (JPEG format is recommended) and click [Save]. 8Click (close box) in the PhotoStudio window to close it. • If the scanner does not perform as described above, read the Troubleshooting section of the Scanning Guide (HTML format manual). •...
Page 16
14 Specifications *1 USB 2.0 Hi-Speed mode. Transfer time to computer is not included.*2 Calibration processing time is not included.*3 Type of AC adapter depends on the area where the scanner is purchased. • Specifications are subject to change without notice.CanoScan 3000F CanoScan 3000 Scanner TypeFlatbed Scanning ElementCCD 6-line color Light SourceCold cathode fluorescent lamp Optical Resolution1200 x 2400 dpi Selectable Resolution25 - 9600 dpi (ScanGear CS) Scanning Bit DepthColor 16 bit input / 8...
Page 17
15 System Information This form should be used to record the operating environment for the purchased scanner. If any problems occur with the scanner, you will need this information when you contact our Customer Support Help Desk. Be sure to record the information and store it in a safe location. • This information is also required to request a repair under warranty. Make sure you record the information and store it in a safe location. • Guaranteed servicing for this equipment will expire five years...
Page 18
CANON INC.30-2, Shimomaruko 3-chome, Ohta-ku Tokyo 146-8501, Japan CANON U.S.A., INC.One Canon Plaza, Lake Success, New York 11042, U.S.A.Customer Care Center: 1-757-413-2848 http://www.usa.canon.com/consumer CANON CANADA INC.6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada 1-800-OK CANON http://www.canon.ca CANON LATIN AMERICA, INC.703 Waterford Way, Suite 400 Miami, Florida 33126, U.S.A. CANON MEXICANA, S. de R.L. de C.V.Anillo Periferico Sur No. 4124, Torre Zafiro (II) Colonia Ex-Rancho de...