Canon Projector Wx520 User Manual
Here you can view all the pages of manual Canon Projector Wx520 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 171
![Page 171
Completing Projector Settings
171
Installation and Maintenance
Connecting to a Network
Registering a Network
Password
> [Network settings] > [Register
network password]
Register the projector network
password.
When [Register network password] is
selected, the window shown below
appears.
Enter a 4-digit password.
Enter the password using the [ ] / [ ] /
[ ] / [ ] buttons on the remote control.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• If you forget...](http://img.usermanuals.tech/thumb/14/99562/w300_projector_manual_8142_d-170.png "Page 171
Completing Projector Settings
171
Installation and Maintenance
Connecting to a Network
Registering a Network
Password
> [Network settings] > [Register
network password]
Register the projector network
password.
When [Register network password] is
selected, the window shown below
appears.
Enter a 4-digit password.
Enter the password using the [ ] / [ ] /
[ ] / [ ] buttons on the remote control.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• If you forget...")
Completing Projector Settings 171 Installation and Maintenance Connecting to a Network Registering a Network Password > [Network settings] > [Register network password] Register the projector network password. When [Register network password] is selected, the window shown below appears. Enter a 4-digit password. Enter the password using the [ ] / [ ] / [ ] / [ ] buttons on the remote control. Press the OK button to accept your setting and then press the MENU button or EXIT button. • If you forget...
Page 172
![Page 172
Completing Projector Settings
172
Specifying Standby
Power Consumption
> [Network settings] > [Network
standby settings]
Specify network function operating
status in standby mode as follows.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Low-power] is the factory default.
• [Low-power] may delay access over the
network for some functions. For faster
access, select [Normal].
• Power consumption when [Network function
(wired)] is [On] varies depending...](http://img.usermanuals.tech/thumb/14/99562/w300_projector_manual_8142_d-171.png "Page 172
Completing Projector Settings
172
Specifying Standby
Power Consumption
> [Network settings] > [Network
standby settings]
Specify network function operating
status in standby mode as follows.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Low-power] is the factory default.
• [Low-power] may delay access over the
network for some functions. For faster
access, select [Normal].
• Power consumption when [Network function
(wired)] is [On] varies depending...")
Completing Projector Settings 172 Specifying Standby Power Consumption > [Network settings] > [Network standby settings] Specify network function operating status in standby mode as follows. Press the OK button to accept your setting and then press the MENU button or EXIT button. • [Low-power] is the factory default. • [Low-power] may delay access over the network for some functions. For faster access, select [Normal]. • Power consumption when [Network function (wired)] is [On] varies depending...
Page 173
![Page 173
Completing Projector Settings
173
Installation and Maintenance
Connecting to a Network
Viewing the Gateway
Address
> [Network settings] > [Detailed settings
(wired)] >
[Gateway address]
View the projector’s gateway
address as follows.
Note that the information can only be
displayed, not changed.
Viewing the MAC
Address
> [Network settings] > [Detailed settings
(wired)] >
[MAC address]
View the projecto’s MAC address as
follows.
Note that the information can only be
displayed, not changed.](http://img.usermanuals.tech/thumb/14/99562/w300_projector_manual_8142_d-172.png "Page 173
Completing Projector Settings
173
Installation and Maintenance
Connecting to a Network
Viewing the Gateway
Address
> [Network settings] > [Detailed settings
(wired)] >
[Gateway address]
View the projector’s gateway
address as follows.
Note that the information can only be
displayed, not changed.
Viewing the MAC
Address
> [Network settings] > [Detailed settings
(wired)] >
[MAC address]
View the projecto’s MAC address as
follows.
Note that the information can only be
displayed, not changed.")
Completing Projector Settings 173 Installation and Maintenance Connecting to a Network Viewing the Gateway Address > [Network settings] > [Detailed settings (wired)] > [Gateway address] View the projector’s gateway address as follows. Note that the information can only be displayed, not changed. Viewing the MAC Address > [Network settings] > [Detailed settings (wired)] > [MAC address] View the projecto’s MAC address as follows. Note that the information can only be displayed, not changed.
Page 174
![Page 174
Completing Projector Settings
174
Enabling/Disabling
DHCP
> [Network settings] > [Detailed settings
(wired)] >
[DHCP]
You can turn the projector DHCP
function on or off.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Off] is the factory default.
Specifying TCP/IP
Settings
> [Network settings] > [Detailed settings
(wired) ] >
[TCP/IP setting]
Configure the projector TCP/IP
settings.
When [TCP/IP setting] is selected, the
window shown below appears....](http://img.usermanuals.tech/thumb/14/99562/w300_projector_manual_8142_d-173.png "Page 174
Completing Projector Settings
174
Enabling/Disabling
DHCP
> [Network settings] > [Detailed settings
(wired)] >
[DHCP]
You can turn the projector DHCP
function on or off.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Off] is the factory default.
Specifying TCP/IP
Settings
> [Network settings] > [Detailed settings
(wired) ] >
[TCP/IP setting]
Configure the projector TCP/IP
settings.
When [TCP/IP setting] is selected, the
window shown below appears....")
Completing Projector Settings 174 Enabling/Disabling DHCP > [Network settings] > [Detailed settings (wired)] > [DHCP] You can turn the projector DHCP function on or off. Press the OK button to accept your setting and then press the MENU button or EXIT button. • [Off] is the factory default. Specifying TCP/IP Settings > [Network settings] > [Detailed settings (wired) ] > [TCP/IP setting] Configure the projector TCP/IP settings. When [TCP/IP setting] is selected, the window shown below appears....
Page 175
![Page 175
Completing Projector Settings
175
Installation and Maintenance
Connecting to a Network
Initializing Network
Settings
> [Network settings] > [Detailed settings
(wired)] >
[Network setting
initialization]
You can initialize the projector
network settings.
When [Network setting initialization] is
selected, the window shown below
appears. Select [Yes] then press the
OK button.
• The following items are initialized.
-Settings used for web login, such as the
network setting screen, user name,...](http://img.usermanuals.tech/thumb/14/99562/w300_projector_manual_8142_d-174.png "Page 175
Completing Projector Settings
175
Installation and Maintenance
Connecting to a Network
Initializing Network
Settings
> [Network settings] > [Detailed settings
(wired)] >
[Network setting
initialization]
You can initialize the projector
network settings.
When [Network setting initialization] is
selected, the window shown below
appears. Select [Yes] then press the
OK button.
• The following items are initialized.
-Settings used for web login, such as the
network setting screen, user name,...")
Completing Projector Settings 175 Installation and Maintenance Connecting to a Network Initializing Network Settings > [Network settings] > [Detailed settings (wired)] > [Network setting initialization] You can initialize the projector network settings. When [Network setting initialization] is selected, the window shown below appears. Select [Yes] then press the OK button. • The following items are initialized. -Settings used for web login, such as the network setting screen, user name,...
Page 176
![Page 176
Completing Projector Settings
176
Specifying Use of
AMX Device
Discovery
> [Network settings] > [AMX Device
Discovery]
In a network environment, AMX
Device Discovery can be used to
enable other equipment to discover
the projector. For networks without
AMX Device Discovery, select [Off].
• [Off] is the factory default.
What is PJLink?
In September 2003, the PJLink
Working Group was established
under the Data Projector Committee.
During the first year, this PJLink
Working Group standardized...](http://img.usermanuals.tech/thumb/14/99562/w300_projector_manual_8142_d-175.png "Page 176
Completing Projector Settings
176
Specifying Use of
AMX Device
Discovery
> [Network settings] > [AMX Device
Discovery]
In a network environment, AMX
Device Discovery can be used to
enable other equipment to discover
the projector. For networks without
AMX Device Discovery, select [Off].
• [Off] is the factory default.
What is PJLink?
In September 2003, the PJLink
Working Group was established
under the Data Projector Committee.
During the first year, this PJLink
Working Group standardized...")
Completing Projector Settings 176 Specifying Use of AMX Device Discovery > [Network settings] > [AMX Device Discovery] In a network environment, AMX Device Discovery can be used to enable other equipment to discover the projector. For networks without AMX Device Discovery, select [Off]. • [Off] is the factory default. What is PJLink? In September 2003, the PJLink Working Group was established under the Data Projector Committee. During the first year, this PJLink Working Group standardized...
Page 177
![Page 177
Completing Projector Settings
177
Installation and Maintenance
Connecting to a Network
Specifying Use of
Crestron RoomView
> [Network settings] > [Crestron
RoomView]
Crestron RoomView enables
centralized management of multiple
projectors over a network. For
example, projectors can be remotely
controlled to troubleshoot issues,
check the useful life of lamps, or turn
the projectors on or off. Specify
whether or not to use Crestron
RoomView as follows.
• [Off] is the factory default.OffDisables...](http://img.usermanuals.tech/thumb/14/99562/w300_projector_manual_8142_d-176.png "Page 177
Completing Projector Settings
177
Installation and Maintenance
Connecting to a Network
Specifying Use of
Crestron RoomView
> [Network settings] > [Crestron
RoomView]
Crestron RoomView enables
centralized management of multiple
projectors over a network. For
example, projectors can be remotely
controlled to troubleshoot issues,
check the useful life of lamps, or turn
the projectors on or off. Specify
whether or not to use Crestron
RoomView as follows.
• [Off] is the factory default.OffDisables...")
Completing Projector Settings 177 Installation and Maintenance Connecting to a Network Specifying Use of Crestron RoomView > [Network settings] > [Crestron RoomView] Crestron RoomView enables centralized management of multiple projectors over a network. For example, projectors can be remotely controlled to troubleshoot issues, check the useful life of lamps, or turn the projectors on or off. Specify whether or not to use Crestron RoomView as follows. • [Off] is the factory default.OffDisables...
Page 178
![Page 178
178
Completing Computer Settings
Specifying an IP Address
Following is an explanation of how to set the PC IP address for each operating
system.
■Windows 7
1From the PC [Start] menu, select [Control Panel].
2Click on [Network and Internet], then click on [View network status and
tasks].
3From the menu on the left side of the window, click on [Change adapter
settings].
4Right-click [Local Area Connection], and open [Properties].
5Select [Internet Protocol Version 4 (TCP/IPv4)] and click the...](http://img.usermanuals.tech/thumb/14/99562/w300_projector_manual_8142_d-177.png "Page 178
178
Completing Computer Settings
Specifying an IP Address
Following is an explanation of how to set the PC IP address for each operating
system.
■Windows 7
1From the PC [Start] menu, select [Control Panel].
2Click on [Network and Internet], then click on [View network status and
tasks].
3From the menu on the left side of the window, click on [Change adapter
settings].
4Right-click [Local Area Connection], and open [Properties].
5Select [Internet Protocol Version 4 (TCP/IPv4)] and click the...")
178 Completing Computer Settings Specifying an IP Address Following is an explanation of how to set the PC IP address for each operating system. ■Windows 7 1From the PC [Start] menu, select [Control Panel]. 2Click on [Network and Internet], then click on [View network status and tasks]. 3From the menu on the left side of the window, click on [Change adapter settings]. 4Right-click [Local Area Connection], and open [Properties]. 5Select [Internet Protocol Version 4 (TCP/IPv4)] and click the...
Page 179
![Page 179
179
Completing Computer Settings
Installation and Maintenance
Connecting to a Network
■Windows Vista
1From the PC [Start] menu, select [Control Panel].
2Click on [View network status and tasks].
3From the menu on the left side of the window, click on [Manage network
connections].
4Right-click [Local Area Connection], and open [Properties].
5Select [Internet Protocol Version 4 (TCP/IPv4)] and click the [Properties]
button. Make a note of the original network settings (IP address, subnet
mask, default...](http://img.usermanuals.tech/thumb/14/99562/w300_projector_manual_8142_d-178.png "Page 179
179
Completing Computer Settings
Installation and Maintenance
Connecting to a Network
■Windows Vista
1From the PC [Start] menu, select [Control Panel].
2Click on [View network status and tasks].
3From the menu on the left side of the window, click on [Manage network
connections].
4Right-click [Local Area Connection], and open [Properties].
5Select [Internet Protocol Version 4 (TCP/IPv4)] and click the [Properties]
button. Make a note of the original network settings (IP address, subnet
mask, default...")
179 Completing Computer Settings Installation and Maintenance Connecting to a Network ■Windows Vista 1From the PC [Start] menu, select [Control Panel]. 2Click on [View network status and tasks]. 3From the menu on the left side of the window, click on [Manage network connections]. 4Right-click [Local Area Connection], and open [Properties]. 5Select [Internet Protocol Version 4 (TCP/IPv4)] and click the [Properties] button. Make a note of the original network settings (IP address, subnet mask, default...
Page 180
![Page 180
Completing Computer Settings
180
■Windows XP
1From the PC [Start] menu, select [Control Panel].
2Select [Network and Internet Connections] and open [Network
Connections].
3Right-click [Local Area Connection], and open [Properties].
4Select [Internet Protocol (TCP/IP)] and click the [Properties] button. Make
a note of the original network settings (IP address, subnet mask, default
gateway, etc.).
5Select [Use the following IP address] and set the IP address and subnet
mask.
The factory default IP...](http://img.usermanuals.tech/thumb/14/99562/w300_projector_manual_8142_d-179.png "Page 180
Completing Computer Settings
180
■Windows XP
1From the PC [Start] menu, select [Control Panel].
2Select [Network and Internet Connections] and open [Network
Connections].
3Right-click [Local Area Connection], and open [Properties].
4Select [Internet Protocol (TCP/IP)] and click the [Properties] button. Make
a note of the original network settings (IP address, subnet mask, default
gateway, etc.).
5Select [Use the following IP address] and set the IP address and subnet
mask.
The factory default IP...")
Completing Computer Settings 180 ■Windows XP 1From the PC [Start] menu, select [Control Panel]. 2Select [Network and Internet Connections] and open [Network Connections]. 3Right-click [Local Area Connection], and open [Properties]. 4Select [Internet Protocol (TCP/IP)] and click the [Properties] button. Make a note of the original network settings (IP address, subnet mask, default gateway, etc.). 5Select [Use the following IP address] and set the IP address and subnet mask. The factory default IP...