Canon Projector SX6000 User Manual

11
Table of Contents
Table of Contents■ When projecting on a 16:10 screen in the aspect ratio of the connected device......... 215
■ When projecting on a 16:9 screen in the aspect ratio of the connected device........... 216
Displayed Test Patterns........................................................................................... 217
Supported Signal Types .......................................................................................... 218
Product Specifications...

12
Safety Instructions
Before installing and operating the projector, read this manual thoroughly.
This projector provides many convenient features and functions. Operating the projector 
properly enables you to manage those features and maintain it in good condition for 
many years to come.
Improper operation may result in not only shortening the product life, but also malfunc-
tions, fire hazards, or other accidents.
If your projector does not seem to be operating properly, read this manual again,...

13
Safety Instructions
Safety Instructions
Safety Precautions
WARNING:
• THIS APPARATUS MUST BE GROUNDED.
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS 
APPLIANCE TO RAIN OR MOISTURE.
 This projector produces intense light from the projection lens. Do not stare directly into 
the lens, otherwise eye damage could result. Be especially careful that children do not 
stare directly into the beam.
 Install the projector in a proper position. Otherwise it may result in a fire hazard....

Safety Instructions
14
■READ AND KEEP THIS OWNER’S MANUAL FOR LATER USE.
All the safety and operating instructions should be read before beginning to operate the 
product.
Read all of the instructions given here and retain them for later use. Unplug this projector 
from the AC power supply before cleaning. Do not use liquid or aerosol cleaners on the 
projector. Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the projector.
 
For added protection of the projector during a...

15
Safety Instructions
Safety Instructions
Never push objects of any kind into this projector through cabinet slots as they may touch 
dangerous voltage points or short out parts that could result in a fire or electric shock. 
Never spill liquid of any kind onto the projector.
Do not install the projector near the ventilation duct of air-conditioning equipment.
This projector should be operated using only the type of power source indicated on the 
marking label. If you are not sure of the type of power...

Safety Instructions
16
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirements for use in the 
country you purchased it.
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EAS-
ILY ACCESSIBLE.
AC Power Cord for the United States and Canada:
The AC Power Cord used in the United States and Canada is 
listed by the Underwriters Laboratories (UL) and certified by the 
Canadian Standard Association (CSA).
The AC Power Cord has a grounding-type AC line plug....

17
Safety Instructions
Safety Instructions
Federal Communication Commission Notice
Multimedia Projector, Model: WUX5000 / WUX4000 / WX6000 / SX6000
This device complies with Part 15 of the FCC Rules. Operation is subject to the following 
two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may 
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a...

Safety Instructions
18
Precautions for Use
As this section contains important safety-related information, be sure to read the following
carefully beforehand in order to use your projector correctly and safely.
If the following situations occur, turn the power off, remove the power plug from the 
power outlet and contact the Canon Customer Support Center. Failure to do so could 
cause a fire or result in an electric shock. 
 If smoke is emitted
 If an unusual smell or noise is emitted
 If a loud noise is...

19
Safety Instructions
Safety Instructions
Precautions for Installation
Pay attention to the following points regarding the power source, power plug and han-
dling of the connector. Failure to do so could result in a fire, electric shock or personal 
injury. 
 Do not use any power source with a voltage other than the voltage indicated (AC 100 
– 240 V).
 Do not pull the power cord and be sure to hold the power plug or connector when 
removing. The cord could be damaged as a result.
 Do not insert any...

Safety Instructions
20
Pay attention to the following points regarding installation and handling of the projector. 
Failure to do so may cause a fire, electric shock or personal injury.
 Do not move the projector until you have switched off the power, removed the power 
plug from the power outlet and unplugged any other cables.
 Before installing or replacing a lens unit, make sure to remove the power plug from 
the outlet. Failure to do so could result in an electric shock or injury.
 Do not remove the...