Canon projector REALiS SX80 Maprojector Rk II D User Manual

21
Table of Contents
Safety Instructions
Before Use
Projecting an Image 
Useful Functions Available During a Presentation
 
Setting Up Functions from Menus
Projecting an Image from a Digital Camera or an 
USB Flash Memory (SX80 II)
Connecting the Projector to Network (SX80 II)
Appendix
Index
Before Use 

22
Supplied Accessories
Check whether the following accessories are supplied with the projector.
■Installing the Lens Cap
As shown in the illustration on the right, put the lens cap 
strap through the hole on the lens cap, and then through 
the lens cap strap insertion hole at the bottom of the pro-
jector.
 When the projector is not in use, attach the lens cap to 
protect the lens.
zRemote controlzBatteries (type AAA, two)
for remote control zComputer connection cable
(DVI/Mini D-sub, 15-pin) (SX80...

23Supplied Accessories
Before Use
■Putting the Projector in the Carrying Bag
Store the projector and the accessories in the carrying bag as shown in the illustration 
below.
The carrying bag is intended to protect the surfaces of the projector from dust or 
scratches, and is not designed to protect the projector from external shocks.
 Wait until the cooling fan stops before putting the projector in the carrying bag. Do not put 
the projector in the carrying bag until the cooling fan stops rotating. The...

24
Par t Names
Main Unit of Projector (SX80 MarkII is used in the following illustrations)
■Front Side
■Rear Side
Terminals and 
connectors
Infrared remote receiver (P31) LensAdjustable foot lock button (P37) Anti-theft lock hole
An anti-theft wire cable available on the mar-
ket can be connected.
Lens cap (P22)
Speaker
Be sure to remove the lens cap during 
projection. Failure to do so will result in 
fire hazards or cap deformation.
Caution
Ranging window (SX80 II)
Do not place any obstacle between the...

25Part Names
Before Use
■Bottom Side 
Mounting the Projector on the Ceiling
You can mount the projector on the ceiling.
You need an optional ceiling mounting hanger 
(part number: RS-CL10) and an optional ceil-
ing-mount pipe (part number: RS-CL08 or RS-
CL09) when appropriate. Contact the dealer 
where you purchased the projector for more 
detailed information.
 Make sure to use the optional ceiling-
mount hanger.
 You should never install the ceiling-
mount hanger by yourself.
 If you mount the...

Part Names
26
Remote Control
The projector can be operated using buttons on the remote control or the top control on 
the main unit.
The remote control allows you to operate all functions of the projector.
POWER button (P49, P68)
Turns the projector on or off.
ASPECT button (P66)
Toggles between the modes for aspect ratio.
FOCUS button (P59)
Adjusts focusing.
[ ] [ ]: For rough adjustment.
[]: For fine adjustment.
In SX80 MarkII, press FOCUS and then 
AU TO S ET to adjust the focus automatically.

27Part Names
Before Use
AUTO SET button (P53)
Performs input signal setting, keystone distortion adjustment, focusing 
(SX80 II), and screen color correction (SX80 II) automatically.
INPUT button (P55)
Switches among input signals.
ZOOM button (P58)
Adjusts the image size.
[ ] [ ]: For rough adjustment.
[]: For fine adjustment.

Part Names
28
Top Control
KEYSTONE button
Corrects keystone distortion. (P60)
[ ] [ ]: For keystone adjustment.
Press KEYSTONE and then AUTO SET to 
adjust the keystone automatically.
 Moves the image up and down when 
the D. image shift is selected. (P64)
 [ ] [ ]: Adjust the vertical position.

29Part Names
Before Use
Input Terminals
■SX80 MarkII
■SX800
(1)-AANALOG PC-1/DVI-I IN Input Terminal 
(  DVI-I IN) (SX80 II) (P40, P42)
(1)-BANALOG PC-1 Input Terminal 
( IN) (SX800) (P40)
Connects an external monitor output 
from a computer.
Receives an analog PC (ANALOG 
PC-1) or a digital signal (DIGITAL PC, 
SX80 II).
(2) HDMI IN Terminal (SX80 II) (P44)
Receives a digital content image sig-
nal (HDMI).
Carries both video and audio signals 
across a single cable.
(3)
ANALOG PC-2/COMPONENT IN Terminal...

Part Names
30
(8) AUDIO IN Terminal (P40, P41, P42, 
P45, P46)
The audio input terminals for 3 image 
input systems other than HDMI-IN.
They receive the following audio sig-
nals in order from the left.
SX80 MarkII: S-VIDEO or VIDEO, DIGITAL 
PC/ANALOG PC-1, and ANA-
LOG PC-2/COMPONENT
SX800: VIDEO, ANALOG PC-1, 
and ANALOG PC-2/
COMPONENT
The internal speaker outputs the 
audio signal for the selected image 
signal.
(9) AUDIO OUT Terminal (P43, P47)
The audio output terminal to output an 
audio to...