Canon projector REALiS SX7 Maprojector Rk II D User Manual

Table of contents/Safety Instructions
Before Use
Setting Up the Projector
Projecting an Image from the Computer
Projecting an Image from AV Equipment
Useful Functions Available During a Presentation
Setting Up Functions from Menus
Maintenance
Troubleshooting
Appendix
Index
APPENDIX
Table of contents for Appendix
Supported Computer Signal Types............ P132
Relationship between Screen Size and 
Projecting Distance.................................... P133
Glossary...

132
APPENDIX
Appendix
Supported Computer Signal Types
This projector supports following signal types.
If your computer or AV equipment is compatible with any one of these signal types, the pro-
jectors auto PC function select the input signal type to project an image appropriately.
ANALOG PC DIGITAL PC
* Only for SX7 MarkII/SX60
DIGITAL VIDEO
** Interlaced signal
COMPONENT
** Interlaced signal
- The specifications in the table above are sub-
ject to change without prior notice.
- This projector does not...

133
APPENDIX
Relationship between Screen Size and Projecting Distance
Screen size at 4:3 
aspect ratio 
Type – W x D (cm)Projecting distance at (m)
H1 (cm) H2 (cm)Screen size at 16:9 
aspect ratio 
Type – W x D (cm) Max. zooming Min. zooming
40 81 x 611.2 (3.9)2.0 (6.6)55 (1.8)6 (0.2)37 81 x 46
50 102 x 76 1.5 (4.9) 2.5 (8.2) 69 (2.3) 8 (0.26) 46 102 x 57
60 122 x 911.8 (5.9)2.9 (9.6)82 (2.7)9 (0.3)55 122 x 69
70 142 x 107 2.1 (6.9) 3.4 (11.2) 96 (3.1) 11 (0.36) 64 142 x 80
80 163 x 1222.4 (7.9)3.9...

134
APPENDIX
Glossary
* is only applicable to SX7 MarkII
6-axis color adjust (P107)
The color adjustment function for an
advanced user. You can adjust color balance
and color level for 6 axis of RGB (red/green/
blue) and CMY (cyan/magenta/yellow) of the
projected image to make a fine color adjust-
ment. You can perform the 6-axis color
adjustment in the image adjustment menu.
AdobeRGB (P55, 102)
A color space specification set up by Adobe
systems Incorporated which is applied to
high performance digital...

135
APPENDIX
Color temperature* (P105)
A value that represents the related color in a
light source in general. In this projector, the
color temperature is used to adjust the RGB
color balance for the projected image to cor-
rect the related color influence by the ambi-
ent light. If you increase and decrease the
color temperature, white changes to blue and
red, respectively. You can set the color tem-
perature in the [Color adjustment] menu if
[Photo] has been selected for [Image mode].
Component (P27,...

136
APPENDIX
HDMI (P65, 70)
A digital video signal connection interface for
an AV equipment. Its terminal is more com-
pact than the DVI terminal. It allows to trans-
mit video and audio signals simultaneously.
Memorized Color Correction (P107)
A memorized color is a color in our memory.
The memorized color such as blue for the sky
is more vivid than the real color, so you may
feel colors of a projected image are dull. If
such is the case, enable the memorized color
correction function to make the colors...

137
APPENDIX
S-video (P27, 66, 92)
A signal system (YC separation signal) used
to send a brightness signal (Y) and color sig-
nal (C) separately. Connect the S-video ter-
minal on the AV equipment and the S-VIDEO
IN terminal on this projector with an S-video
cable. Select [S-VIDEO] at projection.
Tracking (P93)
To reproduce an image from an analog
image signal, the process to accumulate
image information at the appropriate timing
with reference to the synchronization signal
within the image signal. This...

138
APPENDIX
Specifications
Projector
* 99.99% or more of the LCD panel pixels are effective. During projection, 0.01% or less of pixels may stay lit or unlit due to the charac-
teristics of the LCD panel.
* Using the projector continuously for an extended period of time may accelerate the deterioration of optical parts.
Remote Control
Model name SX7 MarkII/SX60
Display system RGB liquid crystal system
Optical system Color separation by dichroic mirror/polarizing beam splitter and color composition by...

139
APPENDIX
External View
Input terminal-2 (ANALOG IN-2) (Analog PC-2 input/component input terminal)
This terminal is used as a computer analog PC input or component input terminal. Use a D-
sub computer cable for connection.
Mini D-sub 15-pin
1R 9+5 V power
2 G 10 Ground (Vertical sync.)
3 B 11 Monitor ID0
4 Monitor ID2 12 DDC data
5 Ground (Horizontal sync.) 13 Horizontal sync.
6 Ground (R) 14 Vertical sync.
7 Ground (G) 15 DDC clock
8 Ground (B)
zThe terminal specifications for the analog PC-2 input...

140
INDEX
Index
Numerics
6-axis color adjust  ........................ 107, 134
A
Adjusting keystone distortion  ................. 52
AdobeRGB  ............................. 56, 102, 134
Air filter  ................................................. 121
Ambient light (SX7 MarkII)  ................... 108
ANALOG IN-1  .................................. 26, 36
ANALOG IN-2  ............................ 26, 36, 64
Analog PC  ................................ 36, 48, 134
Aspect  ...................................