Canon projector REALiS SX6000 Pprojector Ro AV User Manual
Here you can view all the pages of manual Canon projector REALiS SX6000 Pprojector Ro AV User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
41 Part Names Before Use (1)LAN port (P166) Connects the LAN cable. Used to connect the projector to a network. (2)ANALOG PC-1 / COMPONENT IN terminal ( /COMPONENT IN) (P47, P53) Receives the analog PC signal (Analog PC-1). A component cable can be used to receive the component image signal (Component). (3)ANALOG PC- 2 / DVI-I IN terminal ( DVI-I IN) (P50) Connects the external monitor output from a computer. Receives the digital PC signal (Digital PC) or analog PC signal (Analog PC-2). (4)HDMI IN...
Page 42
42
Page 43
43 MULTIMEDIA PROJECTOR User’s Manual (Operation)
Page 44
44
Page 45
Safety Instructions Before Use Table of Contents Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus User’s Manual Installation Connecting to a Network Maintenance Appendix Index Appendix Installation Manual 45 Projecting an Image
Page 46
46 Steps for Connecting the Projector and Projecting an Image Connecting the Projector to Equipment (P162) Starting Projection (P56) Selecting an Input Signal (P59) Adjusting the Image (P61) Make the following adjustments. Setting the Display Resolution of the Computer (P61) Selecting an Aspect Ratio of Projected Image (Screen aspect) and a Screen Mode (Aspect) (P63, P69) Adjusting Misaligned Images or Flickering of the Screen Using the Auto PC (P62) Adjusting the Image Size (P71) Adjusting the...
Page 47
![Page 47
47
User’s ManualProjectin
g an Ima
ge
Connecting the Projector
Connecting the Projector to a Computer
Connect the projector to the computer.
A digital connection (P50) is recommended when projecting an image in high quality.
When using a computer with an HDMI output terminal, a digital connection (P51) can be
made using an HDMI cable.
■Connecting to RGB Monitor Output Terminal (Analog Connection)
Connecting with a VGA cable (Input signal type: [Analog PC] (WUX5000 / WUX4000),
[Analog PC-1] (WX6000 /...](http://img.usermanuals.tech/thumb/14/1331/w300_projector-realis-sx6000-pprojector-ro-av-1478293021_d-46.png "Page 47
47
User’s ManualProjectin
g an Ima
ge
Connecting the Projector
Connecting the Projector to a Computer
Connect the projector to the computer.
A digital connection (P50) is recommended when projecting an image in high quality.
When using a computer with an HDMI output terminal, a digital connection (P51) can be
made using an HDMI cable.
■Connecting to RGB Monitor Output Terminal (Analog Connection)
Connecting with a VGA cable (Input signal type: [Analog PC] (WUX5000 / WUX4000),
[Analog PC-1] (WX6000 /...")
47 User’s ManualProjectin g an Ima ge Connecting the Projector Connecting the Projector to a Computer Connect the projector to the computer. A digital connection (P50) is recommended when projecting an image in high quality. When using a computer with an HDMI output terminal, a digital connection (P51) can be made using an HDMI cable. ■Connecting to RGB Monitor Output Terminal (Analog Connection) Connecting with a VGA cable (Input signal type: [Analog PC] (WUX5000 / WUX4000), [Analog PC-1] (WX6000 /...
Page 48
![Page 48
Connecting the Projector
48
Connecting with VGA-DVI cable (Input signal type: [Analog PC-2] P59)
Use a VGA cable in which all pins are connected. If the cable is a type in which all pins
are not connected, the image may not be correctly displayed.
Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor
will reduce the audio volume.
The AUDIO IN terminal can be changed in the Audio in terminal select screen (P139).
(WX6000 / SX6000)
Computer
Monitor output...](http://img.usermanuals.tech/thumb/14/1331/w300_projector-realis-sx6000-pprojector-ro-av-1478293021_d-47.png "Page 48
Connecting the Projector
48
Connecting with VGA-DVI cable (Input signal type: [Analog PC-2] P59)
Use a VGA cable in which all pins are connected. If the cable is a type in which all pins
are not connected, the image may not be correctly displayed.
Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor
will reduce the audio volume.
The AUDIO IN terminal can be changed in the Audio in terminal select screen (P139).
(WX6000 / SX6000)
Computer
Monitor output...")
Connecting the Projector 48 Connecting with VGA-DVI cable (Input signal type: [Analog PC-2] P59) Use a VGA cable in which all pins are connected. If the cable is a type in which all pins are not connected, the image may not be correctly displayed. Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor will reduce the audio volume. The AUDIO IN terminal can be changed in the Audio in terminal select screen (P139). (WX6000 / SX6000) Computer Monitor output...
Page 49
![Page 49
49
Connecting the Projector
User’s ManualProjectin
g an Ima
ge
Connecting with a BNC cable (Input signal type: [Analog PC] (WUX5000 / WUX4000),
[Analog PC-1] (WX6000 / SX6000) P59)
A signal with a dot clock higher than 162 MHz cannot be projected.
Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor
will reduce the audio volume.
The AUDIO IN terminal can be changed in the Audio in terminal select screen (P139).
(WX6000 / SX6000)
Computer
Monitor output...](http://img.usermanuals.tech/thumb/14/1331/w300_projector-realis-sx6000-pprojector-ro-av-1478293021_d-48.png "Page 49
49
Connecting the Projector
User’s ManualProjectin
g an Ima
ge
Connecting with a BNC cable (Input signal type: [Analog PC] (WUX5000 / WUX4000),
[Analog PC-1] (WX6000 / SX6000) P59)
A signal with a dot clock higher than 162 MHz cannot be projected.
Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor
will reduce the audio volume.
The AUDIO IN terminal can be changed in the Audio in terminal select screen (P139).
(WX6000 / SX6000)
Computer
Monitor output...")
49 Connecting the Projector User’s ManualProjectin g an Ima ge Connecting with a BNC cable (Input signal type: [Analog PC] (WUX5000 / WUX4000), [Analog PC-1] (WX6000 / SX6000) P59) A signal with a dot clock higher than 162 MHz cannot be projected. Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor will reduce the audio volume. The AUDIO IN terminal can be changed in the Audio in terminal select screen (P139). (WX6000 / SX6000) Computer Monitor output...
Page 50
![Page 50
Connecting the Projector
50
■Connecting to DVI Monitor Output Terminal (Digital Connection)
Connecting with a DVI cable (Input signal type: [DVI-D] (Digital PC) – P59)
Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor
will reduce the audio volume.
The AUDIO IN terminal can be changed in the Audio in terminal select screen (P139).
(WX6000 / SX6000)
Computer
Monitor output
terminal
(DVI terminal)
AUDIO output terminal
(AUDIO OUT)
DVI-D cable (not included)...](http://img.usermanuals.tech/thumb/14/1331/w300_projector-realis-sx6000-pprojector-ro-av-1478293021_d-49.png "Page 50
Connecting the Projector
50
■Connecting to DVI Monitor Output Terminal (Digital Connection)
Connecting with a DVI cable (Input signal type: [DVI-D] (Digital PC) – P59)
Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor
will reduce the audio volume.
The AUDIO IN terminal can be changed in the Audio in terminal select screen (P139).
(WX6000 / SX6000)
Computer
Monitor output
terminal
(DVI terminal)
AUDIO output terminal
(AUDIO OUT)
DVI-D cable (not included)...")
Connecting the Projector 50 ■Connecting to DVI Monitor Output Terminal (Digital Connection) Connecting with a DVI cable (Input signal type: [DVI-D] (Digital PC) – P59) Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor will reduce the audio volume. The AUDIO IN terminal can be changed in the Audio in terminal select screen (P139). (WX6000 / SX6000) Computer Monitor output terminal (DVI terminal) AUDIO output terminal (AUDIO OUT) DVI-D cable (not included)...