Canon projector LVX6 User Manual
Here you can view all the pages of manual Canon projector LVX6 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 11
2 1. Introduction Introduction to the Projector This section introduces you to your new projector and describes the features and controls. Congratulations on Your Purchase of The Projector The LV-7250/LV-X6 is one of the very best projectors available today. The projector enables you to project precise images up to 300 inches across (measured diagonally) from your PC or Macintosh computer (desktop or notebook), VCR, DVD player, document camera, or a laser disc player. You can use the projector on a...
Page 12
3 About this users manual The fastest way to get started is to take your time and do everything right the first time. Take a few minutes now to review the users manual. This may save you time later on. At the beginning of each section of the manual youll find an overview. If the section doesnt apply, you can skip it. •IBM is a trademark or registered trademark of International Business Machines Corporation. •Mac and PowerBook are trademarks of Apple Computer, Inc., registered in the U.S. and other...
Page 13
4 1. Introduction Part Names of the Projector M EN U BA C KKEYSTONE WARNINGPOWERAUTO PCI N P U TLAMP -+VOLVOL S-VIDEO INV I D E O INSERVICE PORTAUDIO INA U D IO O U T R LA U D I O INAN A LO G IN -1A N A LO G IN -2 MENU BACKKEYSTONE WARNINGPOWERAUTO PCINPUTVOL-VOL+ LA M P Zoom Lever (See page 24)Controls (See page 6) Lens Lens Cap Be sure to remove the lens cap during projection. The cap can deform or fire can occur. Built-in Security Slot ( )* Focus Ring (See page 24) Adjustable Tilt Foot Lock...
Page 14
5 1. Introduction Bottom Adjustable Tilt Foot (See page 23) Adjustable Tilt Foot Lock Button (See page 23)Lamp Cover (See page 53) Rear Foot (Left / Right) HINT: The Canon logo is on the panel of the projector cabinet . When projecting an image with the projector hung from the ceiling, turn the Canon logo upside down. To turn the logo upside down, follow the steps below. 1. Push one end of the logo gently. The other end will pop up slightly. •The right drawing shows the part “C” is pressed gently. •The...
Page 15
6 1. Introduction Top Features MENU BACK KEYSTONE WARNING POWER AUTO PC INPUT VOL-VOL+ LAMP 3 4 158 9 2 106 7 1. POWER Button ( ) Use this button to turn the power on and off when the main power is supplied and the projector is in standby mode. To turn on the projector, press and hold this button for about 1 second. To turn off the projector, press this button twice. 2. POWER Indicator When this indicator is green, the projector is on; when this indicator is orange, it is in standby mode. See the Power...
Page 16
7 1. Introduction AUDIO IN AUDIO OUT S-VIDEOIN VIDEO INL AUDIO IN RSERVICE PORT ANALOG IN-1 ANALOG IN-2 973148 256 Terminal Panel Features 1.ANALOG IN-1 and -2 (ANALOG IN on LV-X6) / Com- ponent Input Connector (Mini D-Sub 15 Pin) Connect your computer or other analog RGB equip- ment such as IBM compatible or Macintosh comput- ers. Use the supplied RGB cable to connect to your computer. This also serves as a component input con- nector that allows you to connect a component video output of component...
Page 17
8 1. Introduction Part Names of the Remote Control 1. Infrared Transmitter Direct the remote control toward the remote sensor on the projector cabinet. 2. POWER Button When the main power is on, you can use this button to turn your projector on. NOTE: To turn on the projector, press and hold the POWER button for about 1 second. You can use this button to turn your projector off. NOTE: To turn off the projector, press this button twice. 3. INFO. Button Provides the information on the current signal and...
Page 18
9 BACK R- CLICKL- CLICK VOL FREEZE D.ZOOMPAGE MENU POWER RD-428E INPUT IMAGE ASPECT INFO. NO SHOW AUTO PC 1 2 46 78 3 5 13 11 1514 1217 18 16 9 10 1. Introduction 11. OK Button Use this button to enter your menu selection. It works the same way as the OK button on the cabinet. See page 6. 12. BACK Button It works the same way as the BACK button on the cabinet. See page 6. 13. L-CLICK Button (Not available on LV-X6) This button works as the mouse left button when the supplied remote mouse receiver is...
Page 19
10 1. Introduction Remote Control Precautions •Handle the remote control carefully. •If the remote control gets wet, wipe it dry immediately. •Avoid excessive heat and humidity. •Do not heat, take apart, or throw batteries into fire. •Ensure that you have the batteries polarity (+/-) aligned correctly. •If you will not be using the remote control for a long time, remove the batteries. •Do not place the batteries upside down. •Do not use new and old batteries together, or use different types of batteries...
Page 20
11 This section describes how to set up your projector and how to connect video and audio sources. 2. Installation and Connections Your projector is simple to set up and use. But before you get started, you must first: Set up a screen and the projector. See page 12. Connect your computer or video equipment to the projector. See pages 14 to 18. Connect the supplied power cord. See page 19. NOTE: Ensure that the power cord and any other cables are disconnected before moving the projector. When moving...