Canon projector LVWX300USTI User Manual

							 
— 25— 
ON-SCREEN DISPLAY (OSD) MENU SETTINGS 
OSD Menu Controls 
The projector has an OSD that lets you make image adjustments and change various settings.  
Navigating the OSD 
You can use the remote control cursor buttons or the projector keypad  to navigate and make 
changes to the OSD.  
 
1. To enter the OSD, press the 
MENU button.  
2. There are five menus. Press the 
cursor ◄► button to move 
through the menus.  
3. Press the cursor ▲▼ button to 
move up and down in a menu.  
4. Press ◄► to change values for 
settingsK 
5. Press MENU to close the OSD or 
leave a submenu. 
 
Note: 
Depending on the source, not all items in the OSD are available. For example, the 
Horizontal/Vertical Position items in the Computer menu can only be modified when connected 
to a PC. Items that are not available cannot be accessed and are grayed out.  1
3
2
4
2
1
5
6
3
1
6
5
2
2
1
4  
						

							 
— 26— 
Setting the OSD Language 
Set the OSD language to your preference before continuing. 
1. Press the MENU button. Press the cursor ◄► button to navigate to Installation I. 
 
2. Press the cursor ▲▼ button until Language is highlighted.  
 
3. Press the cursor ◄► button until the language you want is highlighted.  
4. Press the MENU button twice to close the OSD.    
						

							 
— 27— 
OSD Menu Overview 
Use the following illustration to quickly find a setting or determine the range for a setting. 
MAIN MENU 
 
SUB MENU 
   
SETTINGS 
Image  Image Mode      Standard, Presentation, sRGB, 
Movie, User 
 Brilliant Color      0~10 
 Brightness      0~100 
 Contrast      0~100 
 Sharpness      0~31 
 Gamma      2.0, 2.2, 2.4, 2.6, 2.8 
 Advanced  Color Space   Auto, RGB, YUV 
  Color Temperature   Native, 6500K, 7500K, 8200K 
  Color Manager Red Hue, Saturation, Gain 
  Green Hue, Saturation, Gain 
  Blue Hue, Saturation, Gain 
  Cyan Hue, Saturation, Gain 
  Magenta Hue, Saturation, Gain 
  Yellow Hue, Saturation, Gain 
  White Red, Green, Blue 
 Reset        
Computer  Horizontal Position      -5~5 
 Vertical Position      -5~5 
 Tracking      0~31 
 Total Dots      -5~5 
 Auto PC        
Video / Audio  Video AGC      Off, On 
 Video Saturation      0~100 
 Video Tint      0~100 
 Film Mode      Auto, Off 
 Video Overscan      Off, On 
 Closed Captioning      Off, On 
 Audio  Volume  0~8 
   Mute  Off, On 
 Reset        
  
						

							 
— 28— 
MAIN MENU  SUB MENU    SETTINGS 
Installation I  Language      English, Français, Deutsch, 
Españ ol, Portuguê s, 簡体中文, 
繁體中文, Italiano, Svenska, 
Nederlands, Русский, Suomi, 
한국어, ةيبرعلا, Tü rkçe, 日本語, 
Dansk, Polski, Magyar, Čeština, 
ไทย 
 Blank Screen      Black, Red, Green, Blue, White 
 Image Flip H/V     Front Table, Rear Table,  
Front Ceiling, Rear Ceiling 
 Aspect      Fill, 4:3, 16:9, Letter Box, Native 
 Test Pattern    Off, Cross Hatch, RGB Ramps, 
Color Bars, Stair Step, Checker, 
Horizontal Lines, Vertical Lines, 
Diagonal Lines, Horizontal 
Ramp, Vertical Ramp, White, 
Black 
 Keystone     -40~40 
 Advanced  Security Lock   Off ,On 
  Wall Color   Off, Light Yellow, Pink, Light 
Green, Blue, Blackboard 
  Presentation Timer Timer Off ,On 
  Preset Time 1-60 
  Timer Reset   
  D-Zoom   -10~10 
 Reset         
						

							 
— 29— 
MAIN MENU  SUB MENU    SETTINGS 
Installation II  Auto Search      Off, On 
 Auto Power Off (min.)      0~180 
 Direct Power On      Off, On 
 Fan Mode      Normal, High Altitude 
 Lamp Mode      Full Power, Power Saver 
 Advanced  OSD Menu Setting Menu Position Center, Down, Up, Left, 
Right 
  Translucent Menu 0%, 25%, 50%, 75%, 100% 
  Menu Display 10~20 
  Peripheral Test Remote Control 
Test 
 
  Color Test  
  USB Test  
  Reset Lamp Time     
  Low Power Mode   On, Off 
  3D 3D Off, DLP-Link, IR 
  3D Sync Invert On, Off 
  3D Format Frame Sequential, 
Top/Bottom, Side-By-Side, 
Frame Packing
 (3D Frame 
Packing HDMI source only) 
  RS232   RS232, Network 
  Network Setting Network State Disconnect, Connect 
  DHCP Off, On 
  IP Address 0~255, 0~255, 0~255, 
0~255 
  Subnet Mask 0~255, 0~255, 0~255, 
0~255 
  Gateway 0~255, 0~255, 0~255, 
0~255 
  DNS 0~255, 0~255, 0~255, 
0~255 
  Apply Cancel, OK 
 Factory Reset        
 Status  Active Source     
  Video Information     
  Lamp Time (Power 
Saver, Full power) 
    
  Firmware Version   
  
						

							 
— 30— 
Image Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Image 
Menu. Press the cursor ▲▼ button to move up and down in the Image menu. Press ◄► to change 
values for settings. 
 
ITEM DESCRIPTION 
Image Mode Press the cursor ◄► button to set the Image Mode.  
Brilliant Color Press the cursor ◄► button to adjust the Brilliant Color valueK 
Brightness Press the cursor ◄► button to adjust the display brightnessK 
Contrast Press the cursor ◄► button to adjust the display contrastK 
Sharpness mress the cursor ◄► button to adjust the display sharpness level. 
Gamma Press the cursor ◄► button to adjust the gamma correction of the display.  
Advanced Press OK / ► to enter the Advanced menu. See Advanced Feature on page 31. 
Reset Press OK / ► to reset all settings to default values. 
  
						

							 
— 31— 
Advanced Feature 
Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ 
to move to the Advanced menu and then press OK or ►. Press ▼▲ to move up and down in the 
Advanced menu. 
 
ITEM DESCRIPTION 
Color Space  Press the cursor ◄► button to adjust the color space.  
Color Temperature  Press the cursor ◄► button to adjust the color temperature.  
Color Manager  Press OK / ► to enter the color manager menu.  
See page 32 for more information on Color Manager.  
  
						

							 
— 32— 
Color Manager 
Press OK / ► to enter the Color Manager sub menu.  
 
ITEM DESCRIPTION 
Red Select to enter the Red Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Green Select to enter the Green Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Blue Select to enter the Blue Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Cyan Select to enter the Cyan Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Magenta Select to enter the Magenta Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and GainK 
Yellow Select to enter the Yellow Color Manager.  
Press the◄► buttons to adjust the Hue, Saturation, and Gain. 
White Select to enter the White Color Manager.  
Press the ◄► buttons to adjust the Red, Green, and BlueK 
 
  
						

							 
— 33— 
Computer Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the 
Computer menu. Press the cursor ▲▼ button to move up and down in the computer menu. Press 
◄► to change values for settings. 
 
ITEM DESCRIPTION 
Horizontal Position Press the cursor ◄► button to adjust the display position to left or right.  
Vertical Position Press the cursor ◄► button to adjust the display position to up or down.  
Tracking Press the cursor ◄► button to adjust the A/D sampling clockK 
Total Dots Press the cursor ◄► button to adjust the A/D sampling dotK 
Auto PC Press OK / ► to automatically adjustment for phase, tracking, size and positionK 
  
						

							 
— 34— 
Video Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Video 
menu. Press the cursor ▲▼ button to move up and down in the Video menu. Press ◄► to change 
values for settings. 
 
ITEM DESCRIPTION 
Video AGC Press the ◄► buttons to enable or disable the Automatic Gain Control for video 
sourceK 
Video Saturation Press the ◄► buttons to adjust the video saturationK 
Video Tint Press the ◄► buttons to adjust the video tint/hueK 
Film Mode Press the ◄► buttons to select a different film mode.  
Video Overscan Press the ◄► buttons to enable or disable video over scanK 
Closed Captioning Press the ◄► buttons to enable or disable closed captioningK 
Audio Press OK / ► to enter the Audio menu. See Audio on page 35. 
Reset Press OK / ► to reset all settings to default values. 
 
Note: 
Video jagging may occur when playing interlace video. To overcome this issue, open the  
Video menu and adjust the Film Mode feature.