Canon projector LV8320 User Manual
Have a look at the manual Canon projector LV8320 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 66
66
Maintenance and Cleaning
This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard.
● Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same life for each lamp. Some lamps may fail or terminate their life in a shorter period of time than other similar lamp\
s.
● If the projector indicates that the...](http://img.usermanuals.tech/thumb/14/1304/w64_projector-lv8320-1478291401_d-65.png "Page 66
66
Maintenance and Cleaning
This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard.
● Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same life for each lamp. Some lamps may fail or terminate their life in a shorter period of time than other similar lamp\
s.
● If the projector indicates that the...")
![Page 68
68
Appendix
No image – Check the connection between your computer or video equipment and the projector. See pages 16-18. – See if the input signal is correctly output from your computer. Some laptop computers may need to change the setting for monitor output when connect\
ing to a projector. See your computer’s instruction manual for the setting. – It takes about 30 seconds to display an image...](http://img.usermanuals.tech/thumb/14/1304/w64_projector-lv8320-1478291401_d-67.png "Page 68
68
Appendix
No image – Check the connection between your computer or video equipment and the projector. See pages 16-18. – See if the input signal is correctly output from your computer. Some laptop computers may need to change the setting for monitor output when connect\
ing to a projector. See your computer’s instruction manual for the setting. – It takes about 30 seconds to display an image...")
![Page 73
Appendix
73
Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with t\
he V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited.ON-SCREEN DISPLAYRESOLUTIONH-Freq.(KHz)V-Freq.(Hz)VGA 1640 x 48031.4759.88VGA 2720 x 40031.4770.09VGA 3640 x 40031.4770.09VGA 4640 x 48037.8674.38VGA 5640 x 48037.8672.81VGA 6640 x 48037.5075.00
MAC LC13640 x 48034.9766.60MAC 13640 x 48035.0066.67...](http://img.usermanuals.tech/thumb/14/1304/w64_projector-lv8320-1478291401_d-72.png "Page 73
Appendix
73
Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with t\
he V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited.ON-SCREEN DISPLAYRESOLUTIONH-Freq.(KHz)V-Freq.(Hz)VGA 1640 x 48031.4759.88VGA 2720 x 40031.4770.09VGA 3640 x 40031.4770.09VGA 4640 x 48037.8674.38VGA 5640 x 48037.8672.81VGA 6640 x 48037.5075.00
MAC LC13640 x 48034.9766.60MAC 13640 x 48035.0066.67...")
![Page 74
74
Appendix
Note:
• The specifications are subject to change without notice.• Depending on your PC settings, the digital signals of your PC may not be projected correctly. In such a case, confirm your PC settings.• When you project a DVI signal, connect the cables, turn the projector on, then select the input. Finally, turn on your PC. Be sure to follow this procedure, otherwise an image \
may not be projected on the screen. If an image is not projected correctly, restart your PC.• Do not disconnect...](http://img.usermanuals.tech/thumb/14/1304/w64_projector-lv8320-1478291401_d-73.png "Page 74
74
Appendix
Note:
• The specifications are subject to change without notice.• Depending on your PC settings, the digital signals of your PC may not be projected correctly. In such a case, confirm your PC settings.• When you project a DVI signal, connect the cables, turn the projector on, then select the input. Finally, turn on your PC. Be sure to follow this procedure, otherwise an image \
may not be projected on the screen. If an image is not projected correctly, restart your PC.• Do not disconnect...")
![Page 75
Appendix
75
Appendix
Technical Specifications
Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 13.78" x 3.52" x 10.90" \
(350.0 mm X 97.0 mm X 276.9 mm ) \
(Not including protrusions) Net Weight 7.51 lbs (3.4 kg) Feet Adjustment 0˚ to 12˚ Panel Resolution LCD Panel System...](http://img.usermanuals.tech/thumb/14/1304/w64_projector-lv8320-1478291401_d-74.png "Page 75
Appendix
75
Appendix
Technical Specifications
Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 13.78\" x 3.52\" x 10.90\" \
(350.0 mm X 97.0 mm X 276.9 mm ) \
(Not including protrusions) Net Weight 7.51 lbs (3.4 kg) Feet Adjustment 0˚ to 12˚ Panel Resolution LCD Panel System...")
![Page 76
76
Appendix
Model No.
COMPONENT-VGA Cable : LV-CA32
Remote Controller : LV-RC04
Projector Attachment : LV-CL16
Ceiling Attachment : LV-CL18
High Ceiling Attachment : LV-CL19
The parts listed below are optionally available. When ordering those par\
ts, specify the item name and Model No. to the sales dealer.
Accessories User’s Manual (CD-ROM) Important...](http://img.usermanuals.tech/thumb/14/1304/w64_projector-lv8320-1478291401_d-75.png "Page 76
76
Appendix
Model No.
COMPONENT-VGA Cable : LV-CA32
Remote Controller : LV-RC04
Projector Attachment : LV-CL16
Ceiling Attachment : LV-CL18
High Ceiling Attachment : LV-CL19
The parts listed below are optionally available. When ordering those par\
ts, specify the item name and Model No. to the sales dealer.
Accessories User’s Manual (CD-ROM) Important...")
Appendix 71 Appendix HDMI Input/VIDEO Input Auto1080i1035i720p575p480p575i480i 0–630–63 Off System (2)AutoPALSECAMNTSCNTSC 4.43PAL-MPAL-N System (3) Image AdjustContrastBrightnessColorTint RedGreenBlueSharpness ResetStore Gamma Progressive 0–630–630–630–15 0–15 User 1Yes/No OffNoise reductionL1L2 0–630–63 User 4 L2L1 Film Color temp. MidLowXLow UserHigh SVGA 1Mode 1Mode 2 - - - - Total dotsHorizontal positionVertical position Display area HDisplay area VReset Image AdjustContrastBrightnessColor temp. Red Gamma Store 0–630–63 Computer Input PC adjust 0–63 0–15 User 1User 4 Aspect Yes/No * Systems displayed in the System Menu vary depending on an input signal. ResetYes/No Sharpness0–15 Mode 10 Clamp GreenBlue0–630–63 Store Mode free System (1) Mode 1 ScaleH&VH/V H/VYes/NoYes/No On/Off Auto PCFine sync0–31 MidLowXLow UserHigh Current mode Mode 1Mode 10 NormalFull CustomCustom adj. Zoom16:9 CommonPosition Reset CeilingKeystone Reset Rear Aspect ScaleH&VH/V H/VYes/NoYes/No On/Off NormalFull Digital zoom – Custom Digital zoom + Custom adj. Zoom16:9 CommonPosition Reset True CeilingKeystone Rear Reset Screen aspectDefault(16:10)/16:9/4:3 Screen aspectDefault(16:10)/16:9/4:3 Natural wide
72 Appendix Check the indicators for projector condition. • • • green• • • red• • • off • • • blinks green. When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. (p. 65) The projector is off. (The AC power cord is unplugged.) The projector is in stand-by mode. Press the POWER button to turn on the projector. Projector ConditionPOWER red/green Indicators LAMP REPLACE yellow WARNING red The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed and the POWER indicator stops blinking. The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down enough and the temperature returns to normal, the POWER indicator stops blinking and the projector can be turned on. (The WARNING indicator keeps blinking.) The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center for service and checkup. Do not leave the projector on. It may cause an electric shock or a fire hazard. The projector is in the Power management mode. The projector has been cooled down enough and the temperature returns to normal. When turning on the projector, the WARNING indicator stops blinking. The projector is operating normally. Indicators and Projector Condition • • • blinks red.
Appendix 73 Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with t\ he V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited.ON-SCREEN DISPLAYRESOLUTIONH-Freq.(KHz)V-Freq.(Hz)VGA 1640 x 48031.4759.88VGA 2720 x 40031.4770.09VGA 3640 x 40031.4770.09VGA 4640 x 48037.8674.38VGA 5640 x 48037.8672.81VGA 6640 x 48037.5075.00 MAC LC13640 x 48034.9766.60MAC 13640 x 48035.0066.67 MAC 16832 x 62449.7274.55 SXGA 11152 x 86464.2070.40 SVGA 1800 x 60035.15656.25SVGA 2800 x 60037.8860.32SVGA 3800 x 60046.87575.00SVGA 4800 x 60053.67485.06SVGA 5800 x 60048.0872.19SVGA 6800 x 60037.9061.03SVGA 7800 x 60034.5055.38SVGA 8800 x 60038.0060.51SVGA 9800 x 60038.6060.31 SVGA 11800 x 60038.0060.51 ON-SCREEN DISPLAYRESOLUTIONH-Freq.(KHz)V-Freq.(Hz) XGA 101024 x 768XGA 111024 x 768XGA 121024 x 768XGA 131024 x 768 62.0477.07 XGA 141024 x 768 61.0075.70 XGA 151024 x 768 35.52286.96(Interlace)46.9058.20 XGA 81024 x 768 47.0058.30 XGA 91024 x 768 58.0372.00 SXGA 41280 x 1024 63.4879.3536.0087.17(Interlace) 63.3459.98 SXGA 51280 x 1024SXGA 61280 x 1024SXGA 71280 x 1024 63.7460.0171.6967.19 SXGA 101280 x 960 81.1376.107 60.0060.00 XGA 11024 x 768 XGA 41024 x 768 48.3660.00 XGA 61024 x 768XGA 71024 x 768 56.47670.07 48.5060.0244.0054.58 SXGA 81280 x 1024SXGA 91280 x 102463.9860.0279.97675.025 XGA 51024 x 76860.3174.92 VGA 7640 x 48043.26985.00 575i768 x 57615.62550.00(Interlace)480i640 x 48015.73460.00(Interlace) SXGA 121152 x 90071.4075.60SXGA 111152 x 90061.2065.20 SVGA 10800 x 60032.7051.09 SXGA 131280 x 102450.0086.00(Interlace) SXGA 21280 x 102462.5058.60SXGA 31280 x 102463.9060.00 XGA 21024 x 76868.67784.997XGA 31024 x 76860.02375.03 SXGA 181280 x 102446.4386.70(Interlace)SXGA 191280 x 102463.7960.18 SXGA 141280 x 1024SXGA 151280 x 1024SXGA 161280 x 1024SXGA 171152 x 900 50.0094.00(Interlace)63.3760.0176.9772.0061.8566.00 MAC1280 x 96075.0075.08MAC1280 x 102480.0075.08 SXGA+ 11400 x 105063.9760.19 MAC211152 x 87068.6875.06 WXGA 21360 x 768WXGA 31376 x 768WXGA 41360 x 768 47.7060.0048.3660.0056.1672.00 WXGA 11366 x 76848.3660.00 SXGA+ 21400 x 105065.3560.12SXGA+ 31400 x 105065.1259.90 SXGA 201280 x 102491.14685.024 480p640 x 48031.4759.88575p768 x 57531.2550.00 WXGA 71280 x 768WXGA 81280 x 76860.28974.89368.63384.837 WXGA 61280 x 76847.77659.87MAC 191024 x 76860.2475.08 WXGA 101280 x 80041.20050.000WXGA 91280 x 80049.60060.050 WXGA 111280 x 80049.70259.810 1080i1920 x 108033.7560.00(Interlace) 720p1280 x 720 1035i1920 x 1035 45.0060.00 33.7560.00(Interlace) 1080i1920 x 108028.12550.00(Interlace) UXGA 41600 x 120093.7575.00 UXGA 11600 x 1200UXGA 21600 x 1200UXGA 31600 x 1200 75.0060.0081.2565.0087.570.00 720p1280 x 72037.5050.00 WUXGA 21920 x 1200WSXGA+ 11680 x 105074.03859.95065.29059.954 WUXGA 11920 x 120074.55659.885 WXGA+ 21440 x 90074.91860.000WXGA+ 11440 x 90055.93559.887 WXGA 121280 x 80063.9860.02 Note: The specifications are subject to change without notice.
74 Appendix Note: • The specifications are subject to change without notice.• Depending on your PC settings, the digital signals of your PC may not be projected correctly. In such a case, confirm your PC settings.• When you project a DVI signal, connect the cables, turn the projector on, then select the input. Finally, turn on your PC. Be sure to follow this procedure, otherwise an image \ may not be projected on the screen. If an image is not projected correctly, restart your PC.• Do not disconnect the cable while the projector is running. If the cable has been disconnected and then reconnected, an image may not be correctly projected. When the input signal is digital from HDMI terminal, refer to the chart \ below. ON-SCREEN DISPLAYRESOLUTIONH-Freq.(KHz)V-Freq.(Hz) D-VGA640 x 48031.4759.94D-SVGA800 x 60037.87960.32 D-WXGA 11366 x 76848.3660.00 ON-SCREEN DISPLAYRESOLUTIONH-Freq.(KHz)V-Freq.(Hz) D-1035i1920 x 1035D-1080i1920 x 1080D-1080i1920 x 1080 33.7560.00(Interlace)33.7560.00(Interlace)28.12550.00(Interlace) D-XGA1024 x 76843.36360.00 D-WXGA 21360 x 76847.760.00D-WXGA 31376 x 76848.3660.00D-WXGA 41360 x 76856.16072.000D-WXGA 51366 x 76846.50050.000D-WXGA 61280 x 76847.77659.870D-WXGA 71280 x 76860.28974.893 D-SXGA11280 x 102463.9860.02D-SXGA21280 x 102460.27658.069D-SXGA31280 x 102431.6529.80 D-WXGA 81280 x 76868.63384.837D-WXGA 91280 x 80049.57259.870 D-WXGA 101280 x 80041.20050.000D-WXGA 111280 x 80049.70259.810 D-SXGA+ 11400 x 105063.9760.19D-SXGA+ 21400 x 105065.35060.120D-SXGA+ 31400 x 105065.12059.900 D-WSXGA +11680 x 105065.29059.954 D-WUXGA 21920 x 120074.03859.95 D-WXGA +11440 x 90055.93559.887 D-480p640 x 48031.4759.88D-575p768 x 57531.2550.00D-720p1280 x 72037.5050.00D-720p1280 x 72045.0060.00D-WXGA 121280 x 80063.9860.02 D-1080i1920 x 1080----D-1080p1920 x 1080----59.94 59.94(Interlace) D-1080p1920 x 1080----60.00D-1080p1920 x 1080----50.00 D-UXGA1600 x 120075.0060.00
Appendix
75
Appendix
Technical Specifications
Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 13.78" x 3.52" x 10.90" \
(350.0 mm X 97.0 mm X 276.9 mm ) \
(Not including protrusions) Net Weight 7.51 lbs (3.4 kg) Feet Adjustment 0˚ to 12˚ Panel Resolution LCD Panel System 0.59" TFT Active Matrix type, 3 panels Panel Resolution 1,280 x 800 dots Number of Pixels 3,072,000 (1,280 x 800 x 3 panels) Signal Compatibility Color System PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N SD/HD TV Signal Component: 480i, 480p, 575i, 575p, 720p, 1035i and 1080i HDMI: 480p, 575p, 720p, 1080i and 1080p Input Scanning Frequency H-sync. 15kHz–100 kHz, V-sync. 50–100 Hz Optical Information Projection Image Size (Diagonal) Adjustable from 30” to 300” Throw Distance 2.4' ~ 25.2' (0.74 m ~ 7.67 m) Projection Lens F 1.65 ~ 2.33 lens with f 15.47 mm ~ 24.53 mm \
with manual zoom and focus Projection Lamp 245 W
Image Information Brightness 3000 lm (Lamp mode in “Normal”, Image mode in “Presentation”\
) Contrast ratio \
2000:1 (Lamp mode in “Auto”, Image mode in “Presentation”)\
Uniformity 85% Interface Video Input Jack RCA Type x 1 S-video Input Jack Mini DIN 4 pin x 1 Audio Input Jacks RCA Type x 2 Computer 1/Computer 2 Audio Input Jacks Mini Jack (stereo) x 2 Computer In 1/Component Input Terminal Mini D-sub 15 pin x 1 Computer In 2/Monitor Output Terminal Mini D-sub 15 pin x 1 Control Port D-sub 9 pin x 1 Audio Output Jack Mini Jack (stereo) x 1 (variable) LAN Connection Terminal RJ-45 HDMI \
HDMI (V.1.3 with Deep Color) x 1 Audio Internal Audio Amp 10 W RMS Built-in Speaker 1 speaker, ø1.5"(37 mm) Power Voltage and Power Consumption AC 100–240 V (3.8-1.8 A Max.), 50/60 Hz Operating Environment Operating Temperature 41˚F–95˚F (5 ˚C–35 ˚C) Storage Temperature 14˚F–140˚F (-10˚C–60 ˚C) Remote Control Battery AAA Type 1.5V x2 Operating Range 16.4' (5 m)/±30˚ Dimensions 2.0" (W) x 0.7" (H) x 4.3" (D) (52 mm x 18 mm x 110 mm) Net Weight 2.37 oz (67 g) (including batteries)
76
Appendix
Model No.
COMPONENT-VGA Cable : LV-CA32
Remote Controller : LV-RC04
Projector Attachment : LV-CL16
Ceiling Attachment : LV-CL18
High Ceiling Attachment : LV-CL19
The parts listed below are optionally available. When ordering those par\
ts, specify the item name and Model No. to the sales dealer.
Accessories User’s Manual (CD-ROM) Important Information and Quick Start Guide AC Power Cord Remote controller and Batteries VGA Cable Lens Cap with String PIN Code Label Soft Carrying Case Filter Cover for Ceiling Mount Warranty Card
● The specifications are subject to change without notice.● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.
Optional Parts
Appendix 77 Appendix This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. For PJ Link password, see the user’s manual of “Network Set-up and Operation.” PJLink is a registered trademark of JBMIA and pending trademark in some countries. Pj Link Notice Attaching the Filter Cover to the Projector The supplied filter cover is designed for preventing dust accumulation on the filter when mounting the projector on the ceiling. To Ceiling Mount Filter Cover(supplied) Projector For attaching the filter cover to the projector, push the cover as the picture shown. (For removing the filter cover, push the cover to the opposite direction.) Turn over the projector.1 3 Attach the projector to the ceiling mount in accordance with the instruction manuals which come with the ceiling mount. 4 2Before attaching the filter cover to the projector, removing the filter cover (bottom) first. See page 63 for removing. Note: - Please keep the filter cover (bottom) for later use.- If the LV-CL16 Projector Attachment is applied, the supplied filter cover is unnecessary. Projector InputPJLink InputParameter COMPUTER 1ANALOG PCRGB 111 COMPONENTVIDEO 222 SCARTRGB 212 COMPUTER 2 ANALOG PCRGB 313 HDMIRGB(Digital)DIGITAL 333 VIDEOVIDEOVIDEO 121 S-VIDEOS-VIDEOVIDEO 525
78 Appendix COMPUTER IN 1 / COMPONENT IN Terminal: Analog RGB (Mini D-sub 15 pin) 512341096781514131112 Configurations of Terminals Red/Cr Input Ground (Horiz.sync.) Green/Y Input ----- Blue/Cb Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V Power Horiz. sync. Input/Output (Composite H/V sync.) Ground (Vert.sync.) DDC Data Ground Vert. sync. DDC Clock 9 13 10 12 11 14 15 RX – TX + TX – RX + 2 3 4 5 6 7 8 1 LAN TERMINAL ----- ----- ----- ----- CONTROL PORT CONNECTOR (D-sub 9 pin) ----- R X D T X D ----- SG ----- ----- ----- Serial 1 2 3 4 5 6 7 8 -----9 COMPUTER IN 2/MONITOR OUT (ANALOG) Terminal: Analog RGB (Mini D-sub 15 pin) 512341096781514131112 Red Input/Output Ground (Horiz.sync.) Green Input/Output ----- Blue Input/Output Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 ----- Horiz. sync. Input/Output Ground (Vert.sync.) ----- ----- Vert. sync. ----- 9 13 10 12 11 14 15 13579111315171918161412108642 TMDS Dat a 2+ Input Ground (TMDS Dat a 1) Ground (TMDS Data 2) TMDS Data 1+ InputTMDS Data 2- Input TMDS Data 1- InputTMDS Dat a 0+ InputGround (TMDS Dat a 0) 1 5 2 43 678 Ground (TMDS Clock) SCL TMDS Cloc k- Input ---------- SDAGround (DDC/CEC) 11 1 5 12 1413 1617 TMDS Dat a 0- InputTMDS Cloc k+ Input910Plug insert detection1 91 8+5V P ower HDMI (19 Pin Type A)
Appendix 79 Appendix PIN Code Protection Put the label below (supplied) on in a prominent place of the projector's body while it is locked with a PIN code. While the projector is locked with the PIN code. o : Picture in Picture combinations are enabled. x : Picture in Picture combinations are disabled. Note: • When the input signal(s) is/are incompatible, mark will be displayed on the Main/Sub picture. • Depending on the frequency or signal type of PC/AV input, the display resolution may be lowered or images may not be displayed on the Main/Sub picture. • Inputting PC analog signals: Between 100-140 MHz • Inputting PC analog signals: More than 140 MHz • Inputting PC digital signals: More than 100 MHz • Inputting AV digital signals: 1080p • Inputting signal formats: SXGA 20, WUXGA 1, WUXGA 2, WSXGA+1, WXGA+2, UXGA 1, UXGA 2, UXGA 3, UXGA 4, D-1080p List of Picture in Picture COMPUTER 1COMPUTER 2HDMIVIDEOS-VIDEO COMPUTER 1 ANALOG PCCOMPONENTSCARTANALOG PCHDMIVIDEOS-VIDEOANALOG PCCOMPONENTSCARTCOMPUTER 2ANALOG PC HDMIHDMIVIDEOVIDEO S-VIDEOS-VIDEO Main Window Sub Window X
80 Appendix Dimensions Unit: mm(inch) Screw Holes for Ceiling MountScrew: M4Depth: 12.0(0.47) 67.9 (2.67) 212.4 (8.36) 216.5 (8.52) 350 (13.78) 176.3 (6.94) 79.7 (3.14) 254.4 (10.02) 256.0 (10.08) 91.4 (3.60) 109.7 (4.32) 76.6 (3.01)99.1 (3.90)38.8 (1.53) 52.3 (2.006) 48.7 (1.92) 240.0 (9.45) 78.0 (3.07) 52.4 (2.06)47.7 (1.87)32.9 (1.29) 208.0 (8.19)86.0 (3.38) 46.0 (1.81) 64.0 (2.52) 40.7 (1.60) 57.9 (2.28) 8.6 (0.34) 93.2 (3.67) 142.0 (5.59) 45.1 (1.78) 185.2 (7.29) 133.1 (5.24)115.3 (4.54) 73.6 (2.90) 209.0 (8.23)81.1 (3.19) 74.1 (2.92) 60.0 (2.36)42.1 (1.66) 47.0 (1.85) 76.9 (3.03) 121.5 (4.78) 46.2 (1.28) 276.9 (10.90)